EUCHNER Enabling pushbutton ZSM2204; 117128
ZSM2204-117128 (Order no. 117128) ZSM, LED, + and - buttons, vibration motor, stop command device, reset button, plug connector HAN Q17 3-stage function Stop command...
ZSM2204-117128 (Order no. 117128)
ZSM, LED, + and - buttons, vibration motor, stop command device, reset button, plug connector HAN Q17
- 3-stage function
- Stop command device
- Vibration signal optional
- LED indicator
- Reset button ©
- + and – buttons
- Coiled connecting cable, 3.8 m
- Plug connector
3-stage function
Enabling function is active only in the second stage (center position, actuating point). If the pushbutton is released or pushed further (panic function), the enabling is removed (dependent on the wiring, see function sequence).
Stop command device
Dual-channel emergency stop device (red, with pull-to-reset and turn-to-reset button) on the switch housing, for different wiring concepts.
Lower position, protected by anti-kink strain relief in case of a fall.
Vibration signal
The vibration signal is used for tactile feedback of the enabling position.
LED indicator
The LED indicator is used for visual feedback directly at the enabling switch.
Pushbutton black
This button can be configured individually. Example: for reset function directly from the enabling switch.
+ and – buttons
These pushbuttons can be configured individually. For example, for moving axes in the positive or negative direction.
Cable
The high-quality connecting cables are available in a straight version.
Electrical connection ratings
| Connecting cable | 23x0.14 mm² |
| Rated insulation voltage Ui | 250 V |
| rated conditional short-circuit current | 100 A |
| Rated impulse withstand voltage Uimp | 1.5 kV |
| Short circuit protection according to IEC 60269-1 | 2A gG |
| Utilization category | |
| DC-13 | 24V 0.3A |
| DC-13 | 24V 1A |
| DC-13 | 24V 0.01A |
| Switching characteristics | 3-stage enabling switch |
| Degree of contamination (external, according to EN 60947-1) | 3 |
Mechanical values and environment
| Ambient temperature | -5 ... +60 °C |
| Number of changeover contacts | 3 |
| Connection | flying lead |
| Degree of protection | IP54 |
| Material | PA, CR, TPE |
| Mechanical life | 1 x 10⁶ |
| Switching principle | Snap-action contact element |
| Cable length | |
| straight | 10 m |
Reliability values according to EN ISO 13849-1
| Emergency stop | |
| B10D | 0.1 x 10⁶ |
| Enabling switch | |
| B10d | 0.1 x 10⁶ |
Miscellaneous
| in compliance with | 60947-5-8 |
-
DATA Multilang 02 ast 1946422
Similar products:
EUCHNER ZSM2101, LED, + and - buttons, vibration motor, stop command device, key-operated rotary switch; 103126
(Out of stock)
EUCHNER ZSM, LED, + and - buttons, selector switch ZSM2200-105308 ; 105308
(Out of stock)
EUCHNER ZSM2101, LED, + and - buttons, vibration motor, stop command device, key-operated rotary switch; 103126
(Out of stock)
EUCHNER ZSE2-4C1801; 091098
(Out of stock)