EUCHNER Non-contact safety switch CET-AR-..., M12, with Bowden wire ; 110114
Non-contact safety switch CET-AR-..., M12, with Bowden wire Safety switch with guard locking and integrated evaluation electronics Locking force up to 6500 N Up...
Price on request
Non-contact safety switch CET-AR-..., M12, with Bowden wire
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Up to 20 switches in series
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Up to category 4/PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Multicode
- Door monitoring output
- Indication of the door position by LED
- Wire front release (bowden), 3m, automatic return
- Approach direction A (default setting on delivery)
Approvals
Mechanical values and environment
| Housing material | |
| Slide | Stainless steel |
| Safety switch housing | Die-cast aluminum |
| Weight | |
| Net | 1 kg |
| Ambient temperature | |
| At UB = 24V DC | -20 ... 55 °C |
| Degree of protection | IP67 |
| Resilience to vibration | In acc. with EN IEC 60947-5-2 |
| Mechanical life | 1 x 106 |
| Installation orientation | Any |
| Degree of freedom | |
| Y | ±5 mm |
| Z | ±4 mm |
| X | ±5 mm |
| Ready delay | 10 s |
| Switching frequency | max.0,5 Hz |
| Connection | 2 plug connectors M12, 5 and 8-pin |
| Approach speed | max.20 m/min |
| Guard locking principle | Closed-circuit current principle |
| Locking force Fmax | 6500 N |
| Locking force FZh | 5000 N |
Electrical connection ratings
| Operating voltage DC | |
| UB | 24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
| LED | 24 V DC -15% ... 10% |
| Current consumption | |
| IB | 80 mA |
| ICM | 480 mA |
| Utilization category according to EN 60947-5-2 | |
| DC-13 | 24V 200mA |
| Solenoid operating voltage DC | |
| UCM | 24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV |
| Fusing | |
| External (operating voltage UB) | 0,25 ... 8 A |
| External (solenoid operating voltage UCM) | 0,5 ... 8 A |
| Power consumption | |
| Solenoid | max.12 W |
| EMC protection requirements | In acc. with EN IEC 60947-5-3 |
| Solenoid duty cycle | 100 % |
| Degree of contamination (external, according to EN 60947-1) | 3 |
| Connecting cable | 30V DC, 2A |
| Safety class | |
| EN IEC 61140 | III |
| Switching load | |
| According to UL | 24V DC, class 2 |
| Monitoring output OUT | |
| Type of output | p-switching, short circuit-proof |
| Switching current | |
| OUT | 1 ... 50 mA |
| Output voltage | |
| OUT | 0,8xUB ... UB V DC |
| Switching delay from state change | max.400 ms |
| Monitoring output OUT D | |
| Type of output | p-switching, short circuit-proof |
| Switching current | |
| OUT D | 1 ... 50 mA |
| Output voltage | |
| OUT D | 0,8xUB ... UB V DC |
| Switching delay from state change | max.700 ms |
| Safety outputs OA/OB | |
| Type of output | 2 semiconductor outputs, p-switching, short circuit-proof |
| Switching current | |
| Per safety output OA / OB | 1 ... 200 mA |
| Output voltage | |
| High U(OA) / U(OB) | UB-1,5V ... UB V DC |
| Low U(OA) / U(OB) | 0 ... 1 V DC |
| Off-state current Ir | max.0,25 mA |
| Risk time according to EN 60947-5-3 | |
| Single device | max.400 ms |
| Delay per device | 5 ms |
| Switch-on time | 400 ms |
| Discrepancy time | |
| Both safety outputs | max.10 ms |
Work area
| Repeat accuracy R | |
| According to EN 60947-5-2 | 10 % |
Other
| C number | |
| C2290 | With wire front release (bowden) mounted |
| For the approval according to UL the following applies | Operation only with UL class 2 power supply, or equivalent measures see operating instructions |
Reliability values according to EN ISO 13849-1
| Monitoring of guard locking and the safety guard position | |
| Category | |
| Head upward | 3 |
| Head downward or horizontal | 4 |
| Performance Level | PL e |
| PFHD | |
| Head upward | 4.29 x 10-8 |
| Head downward or horizontal | 3.1 x 10-9 |
| Control of the guard locking | |
| Category | Depending on external control of guard locking |
| Performance Level | Depending on external control of guard locking |
| PFHD | Depending on external control of guard locking |
| Mission time | 20 y |
-
398014
-
application example
Similar products:
EUCHNER Non-contact safety switch CET1-AR-CDA-CH-50X-SH-113255; 113255
Non-contact safety switch CET-AR-..., RC18, and double ramp Safety switch with guard locking and integrated evaluation electronics Locking force up to 6500 N Up
-
(Out of stock)
Price on request
EUCHNER Non-contact safety switch CET2-AR-CRA-AH-50X-SH-110205; 110205
Non-contact safety switch CET-AR-..., RC18 Safety switch with guard locking and integrated evaluation electronics Locking force up to 6500 N Up to 20 switches in
-
(Out of stock)
Price on request
EUCHNER Non-contact safety switch CET2-AR-CRA-CH-50F-SG-C2312-109941; 109941
Non-contact safety switch CET-AR-..., M12, with escape release Safety switch with guard locking and integrated evaluation electronics Locking force up to 6500 N
-
(Out of stock)
Price on request
EUCHNER Non-contact safety switch CET3-AR-CRA-CH-50X-SG-110906; 110906
Non-contact safety switch CET-AR-..., M12 Safety switch with guard locking and integrated evaluation electronics Locking force up to 6500 N Up to 20 switches in
-
(Out of stock)
Price on request
EUCHNER Non-contact safety switch CET3-AR-CRA-CH-50X-SH-110104; 110104
Non-contact safety switch CET-AR-..., RC18 Safety switch with guard locking and integrated evaluation electronics Locking force up to 6500 N Up to 20 switches in
-
(Out of stock)
Price on request
EUCHNER Non-contact safety switch CET1-AR-CDA-CH-50X-SG-109231; 109231
Non-contact safety switch CET-AR-..., M12, with double ramp Safety switch with guard locking and integrated evaluation electronics Locking force up to 6500 N Up
-
(Out of stock)
Price on request