EUCHNER Non-contact safety switches CES-I-AP-U-C04-SK-115324; 115324
Non-contact safety switches CES-I-AP-.-C04-…, M8 Safety switch with integrated evaluation electronics No series connection Short circuit monitoring 2 safety...
Price on request
Non-contact safety switches CES-I-AP-.-C04-…, M8
- Safety switch with integrated evaluation electronics
- No series connection
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- Three active faces
- With plug connector M8, 4-pin
- Unicode
Approvals
Workspace
| Repeat accuracy R | |
| according to EN 60947-5-2 | <= 10 |
Electrical connection values
| Fuse | |
| external (operating voltage) | 0.25 ... 8 A |
| Rated insulation voltage Ui | 300 V |
| Rated impulse withstand voltage Uimp | 1.5 kV |
| Operating voltage DC | |
| UB | 24 V DC -15% ... +15% regulated, residual ripple<5%, PELV |
| Turn-on time | |
| Safety outputs | max. 300 ms |
| EMC protection requirements | Acc. to EN IEC 60947-5-3 |
| Risk time according to EN 60947-5-3 | max. 260 ms |
| Safety class | III |
| Current consumption | |
| no load on outputs | max. 35 mA |
| Degree of contamination (external, according to EN 60947-1) | 3 |
| Safety outputs FO1A / FO1B | |
| Output type | Semiconductor outputs, p-switching, short circuit-proof |
| Output voltage | |
| LOW U(FO1A) / U(FO1B) | 0 ... 1 V DC |
| HIGH U(FO1A) / U(FO1B) | UB-1.5V ... UB V DC |
| rated conditional short-circuit current | 100 A |
| Discrepancy time | max. 10 ms |
| Utilization category | |
| DC-13 | 24 V 150 mA |
| Off-state current Ir | max. 0.25 mA |
| Switching current | |
| per safety output | 1 ... 150 mA |
| Test pulse duration | max. 0.3 ms |
| Test pulse interval | min. 100 ms |
Mechanical values and environment
| Connection type | M8 plug connector, 4-pin |
| Tightening torque | |
| Fixing screws | max. 0.8 Nm |
| Ready delay | 0.5 s |
| Installation orientation | any |
| Switching frequency | max. 1 Hz |
| Mounting distance | |
| between 2 switches or 2 actuators | min. 80 mm |
| Mounting type | Surface mounting on metal |
| Shock and vibration resistance | Acc. to EN IEC 60947-5-3 |
| Degree of protection | IP67/IP69K |
| Ambient temperature | -25 ... +65 °C |
| Material | |
| Rubber support | NBR 80 ±5 Shore |
| Housing | Plastic, PBT |
Characteristic values according to EN ISO 13849-1 and EN IEC 62061
| PL | Maximum SIL | PFHD | Category | Mission time | |
|---|---|---|---|---|---|
| Monitoring of the guard position | PL e | - | 4.1x10-9 | 4 | 20 y |
Miscellaneous
| The following applies to the approval according to UL | Operation only with UL Class 2 power supply or equivalent measures |
| Additional feature | Rubber support included |
In combination with actuator CES-A-BDN-06-104730
| Switch-on distance | |
| Installation position A or B (front side) | 19 mm |
| Installation position C or D (broad side) | 15 mm |
| Secured switch-off distance sar | |
| in x/z direction | max. 40 mm |
| in y direction | max. 60 mm |
| Secured switching distance sao | |
| Installation position C or D (broad side) | min. 10 mm |
| Installation position A or B (front side) | min. 14 mm |
| Switching hysteresis | 1 ... 2 mm |
In combination with actuator CES-A-BDN-06-161742
| Switch-on distance | |
| Installation position A | 26 mm |
| Installation position C | 23 mm |
| Secured switch-off distance sar | |
| Installation position A | max. 77 mm |
| Installation position C | max. 72 mm |
| Secured switching distance sao | |
| Installation position C | min. 10 mm |
| Installation position A | min. 16 mm |
| Switching hysteresis | 1 ... 2 mm |
In combination with actuator CES-A-BBN-C04-115271, CES-A-BBN-C04-EX-137527
| Switch-on distance | |
| Installation position C or D (broad side) | 11 mm |
| Installation position A or B (front side) | 15 mm |
| Secured switch-off distance sar | |
| in x/z direction | max. 40 mm |
| in y direction | max. 60 mm |
| Secured switching distance sao | |
Similar products:
EUCHNER Non-contact safety switches CES-I-AP-U-C04-U20-116505; 116505
Non-contact safety switches CES-I-AP-.- C04-…, flying lead Safety switch with integrated evaluation electronics No series connection Short circuit monitoring
-
(Out of stock)
Price on request
EUCHNER Non-contact safety switches CES-I-AP-U-C04-USB-116502; 116502
Non-contact safety switches CES-I-AP-.-C04-…, M12 Safety switch with integrated evaluation electronics No series connection Short circuit monitoring 2 safety
-
(Out of stock)
Price on request
EUCHNER Non-contact safety switch CES-AP-CL2-AH-L10-106192; 106192
Non-contact safety switch CES-AP-CL2-..., flying lead, PVC Safety switch with integrated evaluation electronics No series connection Short circuit monitoring 2 safety
-
(Out of stock)
Price on request
EUCHNER Non-contact safety switch CES-AP-CL2-AH-SB-106553; 106553
Non-contact safety switch CES-AP-CL2-... , M12, PUR Safety switch with integrated evaluation electronics No series connection Short circuit monitoring 2 safety outputs
-
(Out of stock)
Price on request
EUCHNER Non-contact safety switch CES-AP-CR2-CH-L05-105600; 105600
Non-contact safety switch CES-AP-CR2-..., flying lead, PVC Safety switch with integrated evaluation electronics No series connection Short circuit monitoring 2 safety
-
(Out of stock)
Price on request
EUCHNER Non-contact safety switch CES-AP-CR2-CH-L10-106189; 106189
Non-contact safety switch CES-AP-CR2-..., flying lead, PVC Safety switch with integrated evaluation electronics No series connection Short circuit monitoring 2 safety
-
(Out of stock)
Price on request