EUCHNER Transponder-coded safety switch CTP-I-AP-U-HA-ZZE-SBB-159614; 159614
Transponder-coded safety switch CTP-I-AP, 2 x M12, emergency stop (extended) Safety switch without guard locking, with integrated evaluation electronics Direct connection...
Price on request
Transponder-coded safety switch CTP-I-AP, 2 x M12, emergency stop (extended)
- Safety switch without guard locking, with integrated evaluation electronics
- Direct connection to decentralized peripheral systems (e.g. ET200pro)
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Up to category 4 / PL e according to EN ISO 13849-1
- With 2 plug connectors M12
- Unicode
- Emergency stop
- Approach directions A, B and C (delivery state)
Approvals
Workspace
| Repeat accuracy R | |
| according to EN 60947-5-2 | 10 % |
Operating and display elements
| Item | Extras | Color | Designation1 | Number | LED | Slide-in label | Version | Note slide-in label | Switching element |
|---|---|---|---|---|---|---|---|---|---|
| 1 | Emergency stop | 2 PD |
Electrical connection values
| Fuse | |
| external (operating voltage UB) | 0.25 ... 8 A |
| Power consumption | 1 W |
| Rated insulation voltage Ui | 50 V |
| Rated impulse withstand voltage Uimp | 0.5 kV |
| Operating voltage DC | |
| UUB | 24 V DC -15% ... +15% reverse polarity protected, regulated, residual ripple<5%, PELV |
| EMC protection requirements | Acc. to EN IEC 60947-5-3 |
| Utilization category | |
| DC-13 | 24 V 150 mA |
| Switching load | |
| according to UL | 24V DC, Class 2 |
| Safety class | |
| EN IEC 61140 | III |
| Current consumption | |
| IUB | 40 mA |
| Test pulse duration | max. 0.3 ms |
| Test pulse interval | min. 100 ms |
| Degree of contamination (external, according to EN 60947-1) | 3 |
| Emergency stop | |
| Operating voltage | 5 ... 24 V |
| Operating current | 1 ... 100 mA |
| Safety outputs FO1A / FO1B | |
| Output type | 2 semiconductor outputs, p-switching, short circuit-proof |
| Output voltage | |
| LOW U(FO1A) / U(FO1B) | 0 ... 1 V DC |
| HIGH U(FO1A) / U(FO1B) | UB-1.5 ... UB V DC |
| Discrepancy time | |
| both safety outputs | max. 10 ms Acc. to EN IEC 60947-5-3 |
| Turn-on time | max. 400 ms |
| Off-state current Ir | max. 0.25 mA |
| Switching current | |
| per safety output FO1A / FO1B | 1 ... 150 mA |
Mechanical values and environment
| Approach speed | max. 20 m/min |
| Connection type | 2 plug connector M12, 5-pin |
| Extraction force | 20 N |
| Ready delay | max. 1 s |
| Actuating force | 10 N |
| Installation orientation | any |
| Switching frequency | max. 0.5 Hz |
| Mechanical life | 1 x 10⁶ |
| Overtravel | 5 mm |
| Shock and vibration resistance | Acc. to EN IEC 60947-5-3 |
| Degree of protection | IP65 |
| Ambient temperature | |
| at UB = 24 V DC | -20 ... +55 °C |
| Material | |
| Switch head cover | Die-cast zinc |
| Safety switch housing | Reinforced thermoplastic |
Characteristic values according to EN ISO 13849-1 and EN IEC 62061
| Mission time | 20 y |
| Category | 4 |
| Performance Level | PL e |
| PFHD | 4.1 x 10 -9 |
| Emergency stop | |
| B10D | 0.065 x 10⁶ |
Miscellaneous
| The following applies to the approval according to UL | Operation only with UL Class 2 power supply or equivalent measures; see operating instructions |
| Detent mechanism | Snap-in bolt |
Similar products:
EUCHNER Transponder-coded safety switch CTP-I-AP-U-HA-ZZ-SA-136732; 136732
Transponder-coded safety switch CTP-I-AP, M12 Safety switch without guard locking, with integrated evaluation electronics Short circuit monitoring 2 safety outputs
-
(Out of stock)
Price on request
EUCHNER Non-contact safety switch CES-AP-CR2-CH-L10-106189; 106189
Non-contact safety switch CES-AP-CR2-..., flying lead, PVC Safety switch with integrated evaluation electronics No series connection Short circuit monitoring 2 safety
-
(Out of stock)
Price on request
EUCHNER Non-contact safety switch CES-AP-CL2-CH-SF-104509; 104509
Non-contact safety switch CES-AP-CL2-... , with latching connection Safety switch with integrated evaluation electronics No series connection Short circuit monitoring
-
(Out of stock)
Price on request
EUCHNER Actuator CES-A-BBN-106600; 106600
EUCHNER Actuator CES-A-BBN-106600; 106600 // Cube-shaped design 42 x 25 mm Mounting compatible with actuator CES-A-BBA/BCA
-
(Out of stock)
Price on request
EUCHNER Actuator CES-A-BBN-C04; 115271
EUCHNER Actuator CES-A-BBN-C04; 115271 Cube-shaped design 42 x 25 mm Two safety screws M4x20 and rubber support included
-
(Out of stock)
Price on request
EUCHNER Non-contact safety switches CES-I-AP-U-C04-U05; 116503
Non-contact safety switches CES-I-AP-.- C04-…, flying lead Safety switch with integrated evaluation electronics No series connection Short circuit monitoring
-
(Out of stock)
Price on request