Festo Compact air cylinder ADN-125- - ; 536393
Festo Compact air cylinder ADN-125-...
Price on request
Festo Compact air cylinder ADN-125-
- Stroke
- 1 mm ... 500 mm
- Piston diameter
- 125 mm
- Type code
- ADN
- Based on norm
- ISO 21287
- Cushioning
- Elastic cushioning rings/pads at both ends
- Mounting position
- Any
- Design
-
Piston
Piston rod
Profile barrel - Position sensing
- For proximity sensor
- Variants
-
EX protection approval (ATEX)
Metals with copper, zinc or nickel as main constituent are excluded from use. Exceptions are nickel in steel, chemically nickel-plated surfaces, printed circuit boards, cables, electrical plug connectors and coils.
Improved running performance
Extended external thread piston rod
Special thread on piston rod
Extended piston rod
With anti-twist protection
High corrosion protection
Uniform, slow movement
Low friction
Through piston rod
Through, hollow piston rod
Heat-resistant seals max. 120°C
Laser etched rating plate
Piston rod at one end - Operating pressure
- 0.06 MPa ... 1 MPa
- Operating pressure
- 0.6 bar ... 10 bar
- Mode of operation
- Double-acting
- CE marking (see declaration of conformity)
- as per EU explosion protection directive (ATEX)
- Explosion prevention and protection
-
Zone 1 (ATEX)
Zone 2 (ATEX)
Zone 21 (ATEX)
Zone 22 (ATEX) - ATEX category gas
- II 2G
- ATEX category for dust
- II 2D
- Type of ignition protection for gas
- Ex h IIC T4 Gb
- Type of (ignition) protection for dust
- Ex h IIIC T120°C Db
- Explosive ambient temperature
- -20°C <= Ta <= +60°C
- Operating medium
- Compressed air as per ISO 8573-1:2010 [7:4:4]
- Information on operating and pilot media
- Operation with oil lubrication possible (required for further use)
- Corrosion resistance class (CRC)
-
0 - No corrosion stress
3 - High corrosion stress
2 - Moderate corrosion stress - Ambient temperature
- -20 °C ... 120 °C
- Theoretical force at 6 bar, retracting
- 7069 N
- Theoretical force at 6 bar, advancing
- 7069 N ... 7363 N
- Moving mass at 0 mm stroke
- 1080 g
- Additional weight per 10 mm stroke
- 117 g
- Basic weight with 0 mm stroke
- 2880 g
- Additional moving mass per 10 mm stroke
- 39 g
- Type of mounting
-
Optionally:
With through-hole
With internal thread
With accessories - Pneumatic connection
- G1/4
- Note on materials
- RoHS-compliant
- Cover material
-
Aluminum
Anodized - Piston rod material
- High-alloy steel
- Material of cylinder barrel
-
Wrought aluminum alloy
Smooth anodized
Similar products:
Festo Guided actuator DFM-12-30-P-A-GF ; 170827
Place your trust in precise guidance and great absorption of torques and shear forces - coupled with a sturdy, compact design. The guided actuator DFM is suitable
-
(Out of stock)
Price on request
Festo ISO cylinder DSBC-50-400-PPVA-N3 ; 1366958
ISO profile cylinder to ISO 15552 with a wide range of mounting options. DSBC-50-400-PPVA-N3 Part no. 1366958 ISO 15552 (ISO 6431, VDMA 24562) Self-adjusting pneumatic
-
(Out of stock)
Price on request
Festo ISO cylinder DNC-50- - ; 163366
Mounting hole pattern to ISO 15552 Assembled and fitted with tubing ready for connection Particularly suitable for decentralized use in larger systems Valve variants:
-
(Out of stock)
Price on request
Festo Short-stroke cylinder AEVC-12-5-I-P ; 188082
Short-stroke cylinder AEVC-12-5-I-P ; 188082
-
(Out of stock)
Price on request
Festo ISO cylinder DNC-80- - ; 163430
Mounting hole pattern to ISO 15552 Assembled and fitted with tubing ready for connection Particularly suitable for decentralized use in larger systems Valve variants:
-
(Out of stock)
Price on request
Festo ISO cylinder DNC-32- - ; 163302
Mounting hole pattern to ISO 15552 Assembled and fitted with tubing ready for connection Particularly suitable for decentralized use in larger systems Valve variants:
-
(Out of stock)
Price on request