Festo Compact air cylinder DPDM-...-25- - ; 4328892
Compact due to being shorter and lighter and variety of ways it can be screwed on directly. Fixed cushioning, with non-rotating or through piston rod, single or...
Price on request
Compact due to being shorter and lighter and variety of ways it can be screwed on directly. Fixed cushioning, with non-rotating or through piston rod, single or double-acting: caters for your exact requirements.
- Mounting using through-hole and internal thread
- Compact design
- Piston rod variants
- Magnetic piston for position sensing
- Stroke
- 5 mm ... 50 mm
- Piston diameter
- 25 mm
- Type code
- DPDM
- Cushioning
- Elastic cushioning rings/pads at both ends
- Mounting position
- Any
- Mode of operation
-
Single-acting
Pulling
Pushing
Double-acting - Design
-
Piston
Piston rod
Profile barrel - Position sensing
- For proximity sensor
- Variants
-
Heat-resistant seals max. 120°C
Piston rod at one end
Through piston rod
Continuous, hollow piston rod - Protection against torsion/guide
- Guide rod with yoke
- Operating pressure
- 1 bar ... 8 bar
- Operating medium
- Compressed air as per ISO 8573-1:2010 [7:4:4]
- Information on operating and pilot media
- Operation with oil lubrication possible (required for further use)
- Corrosion resistance class (CRC)
- 2 - Moderate corrosion stress
- Ambient temperature
- -10 °C ... 120 °C
- Theoretical force at 6 bar
- 247 N ... 295 N
- Theoretical force at 6 bar, retracting
- 247 N
- Theoretical force at 6 bar, advancing
- 247 N ... 295 N
- Type of mounting
-
Optionally:
With internal thread
With through-hole - Pneumatic connection
- M5
- Note on materials
- RoHS-compliant
- Cover material
- Wrought aluminum alloy
- Housing material
- Wrought aluminum alloy, anodized
- Piston rod material
- High-alloy stainless steel
-
4328892datasheet
-
DPDM ENUS
Similar products:
Festo ISO cylinder DSBC-...-80- - ; 1463495
Cylinder with clamping unit, ISO. Festo Cylinder DSBC-...-80- -
-
(Out of stock)
Price on request
Festo Festo ISO cylinder DNC-125-200-PPV-A ; 163504
Profile cylinder based on ISO 15552 standard with fixed or adjustable cushioning. DNC-125-200-PPV-A Part no. 163504 ISO 15552 (ISO 6431, VDMA 24562) Wide range of
-
(Out of stock)
Price on request
Festo Guided actuator DFM-12-30-P-A-GF ; Pneumatic actuators
Guided actuator DFM-12-30-P-A-GF ; Pneumatic actuators
-
(Out of stock)
Price on request
Festo Compact air cylinder ADVU-20-25-P-A ; 156518
50% less installation space than comparable ISO cylinders to ISO 15552 Wide range of variants for customized applications Piston rod with internal or external thread
-
(Out of stock)
Price on request
Festo ISO cylinder CRDSNU-B-16-40-P-A-MG-A1 ; 8073761
With NSF-H1 grease and a clean design. Very reliable and durable due to dry-running seal. And always correctly adjusted thanks to the self-adjusting end position
-
(Out of stock)
Price on request
Festo Cartridge cylinder EGZ-10-5 ; 15036
Through-hole screw-in short single-acting cylinder. Minimal fitting space Installation with or without mounting components External piston rod thread
-
(Out of stock)
Price on request