Festo Guided actuator DFM-12-30-P-A-GF ; 170827
Place your trust in precise guidance and great absorption of torques and shear forces - coupled with a sturdy, compact design. The guided actuator DFM is suitable...
Price on request
Place your trust in precise guidance and great absorption of torques and shear forces - coupled with a sturdy, compact design. The guided actuator DFM is suitable for clamping, lifting and stopping tasks.
- Actuator and guide unit in a single housing
- High resistance to torques and lateral forces
- Plain or ball bearing guide
- Wide variety of mounting and attachment options
- Wide range of variants for customized applications
- Distance of centre of gravity of payload to yoke plate xs
- 25 mm
- Max. permissible torque load Mx as a function of the stroke
- 0.45 Nm
- Stroke
- 30 mm
- Piston diameter
- 12 mm
- Type code
- DFM
- Drive unit operating mode
- Yoke
- Cushioning
- Elastic cushioning rings/pads at both ends
- Mounting position
- Any
- Guide
- Sliding guide
- Design
- Guide
- Position sensing
- For proximity sensor
- Symbol
- 00991737
- Operating pressure
- 2 bar ... 10 bar
- Max. speed
- 0.8 m/s
- Mode of operation
- Double-acting
- Operating medium
- Compressed air as per ISO 8573-1:2010 [7:4:4]
- Information on operating and pilot media
- Operation with oil lubrication possible (required for further use)
- Corrosion resistance class (CRC)
- 1 - Low corrosion stress
- Ambient temperature
- -20 °C ... 80 °C
- Impact energy in the end positions
- 0.07 J
- Max. payload as a function of the stroke at defined distance xs
- 21 N
- Theoretical force at 6 bar, retracting
- 51 N
- Theoretical force at 6 bar, advancing
- 68 N
- Moving mass
- 200 g
- Product weight
- 435 g
- Alternative connections
- See product drawing
- Pneumatic connection
- M5
- Note on materials
- RoHS-compliant
- Cover material
- Wrought aluminum alloy
- Seals material
- NBR
- Housing material
- Wrought aluminum alloy
- Piston rod material
- High-alloy stainless steel
-
DFM ENUS
Similar products:
Festo ISO cylinder DSBC-50-400-PPVA-N3 ; 1366958
ISO profile cylinder to ISO 15552 with a wide range of mounting options. DSBC-50-400-PPVA-N3 Part no. 1366958 ISO 15552 (ISO 6431, VDMA 24562) Self-adjusting pneumatic
-
(Out of stock)
Price on request
Festo Short-stroke cylinder AEVC-12-5-I-P ; 188082
Short-stroke cylinder AEVC-12-5-I-P ; 188082
-
(Out of stock)
Price on request
Festo ISO cylinder DNC-80- - ; 163430
Mounting hole pattern to ISO 15552 Assembled and fitted with tubing ready for connection Particularly suitable for decentralized use in larger systems Valve variants:
-
(Out of stock)
Price on request
Festo ISO cylinder DNC-32- - ; 163302
Mounting hole pattern to ISO 15552 Assembled and fitted with tubing ready for connection Particularly suitable for decentralized use in larger systems Valve variants:
-
(Out of stock)
Price on request
Festo ISO cylinder DNC-50- - ; 163366
Mounting hole pattern to ISO 15552 Assembled and fitted with tubing ready for connection Particularly suitable for decentralized use in larger systems Valve variants:
-
(Out of stock)
Price on request
Festo Guided actuator DFM-12-30-P-A-GF ; Pneumatic actuators
Guided actuator DFM-12-30-P-A-GF ; Pneumatic actuators
-
(Out of stock)
Price on request