Festo ISO cylinder DSBC-...-80- - ; 1463495
Cylinder with clamping unit, ISO. Festo Cylinder DSBC-...-80- -...
Price on request
Cylinder with clamping unit, ISO. Festo Cylinder DSBC-...-80- -
- Piston seal material
-
FPM
HNBR
TPE-U(PU) - Method of operation clamping unit
-
einfahrend
statisch
Lösen durch Druckluft - Method of operation end-position locking
-
formschlüssige Verriegelung durch Arretierzylinder
Lösen durch Druckluft - Clamping unit housing material
- Aluminium-Knetlegierung, eloxiert
- Piston rod wiper seal material
-
FPM
HNBR
PE
TPE-U(PU) - Cushion piston material
-
Aluminium
POM - Material of spring
-
Federstahl
hochlegierter Stahl rostfrei - Buffer seal material
-
FPM
TPE-U(PU) - Piston clamping unit material
- POM
- Static holding force of end-position locking
- 5000 N
- Static holding force of clamping unit
- 5000 N
- Axial backlash clamping unit
- 0.8 mm
- Locking pressure
- ≥ 0.5 bar
- Clamping unit release pressure
- 3 bar
- Unlocking pressure
- ≤ 1.5 bar
- Axial backlash end-position locking
- 1.5 mm
- Material of piston
- Aluminium-Knetlegierung
- Werkstoff Gehäuse Endlagenverriegelung
- Alu-Knetlegierung, eloxiert
- Nut material
- Stahl, verzinkt
- Bellows material
-
NBR
PA - Flange screws material
- Stahl verzinkt
- Material of bearing
-
Bronze
Metall-Polymer-Verbund
POM - Werkstoff Kolbenstangenabstreifer
-
Messing
PTFE-verstärkt - Stroke
- 1 mm ... 2800 mm
- Piston diameter
- 80 mm
- Piston rod thread
-
M12
M20x1,5 - Max. angle of rotation of the piston rod +/-
- -0.45 deg
- Type code
- DSBC
- Based on norm
- ISO 15552
- Cushioning
-
Elastic cushioning rings/pads at both ends
Self-adjusting pneumatic end-position cushioning
Pneumatic cushioning, adjustable at both ends - Mounting position
- Any
- Conforms to standard
- ISO 15552
- Piston rod end
-
Außengewinde
Innengewinde - Design
-
Piston rod
Profile barrel
Piston - Position sensing
- For proximity sensor
- Symbol
-
00992970
00992971
00991217
00991218
00991235
00991237
00991257
00991258
00991907
00991910 - Variants
-
For unlubricated operation
Bellows on bearing cap
With anti-twist protection
End-position locking with piston rod retracted
Extended piston rod
End-position locking with piston rod extended
Internal thread on piston rod
Metal scraper
Heat-resistant seals max. 120°C
Piston rod at one end
Low friction for balancer applications
Low friction
Increased chemical resistance
Clamping unit attached
Through piston rod
Hard scraper
Constant, slow movement
Sensor slots on 3 profile sides
Temperature range -40 to 80 °C
End-position locking at both ends
Extended external thread piston rod
Temperature range 0 to + 150 °C - Operating pressure
- 0.05 bar ... 12 bar
- Mode of operation
- Double-acting
- ATEX category gas
- II 2G
- Type of ignition protection for gas
- Ex h IIC T4 Gb
- ATEX category for dust
- II 2D
- Type of (ignition) protection for dust
- Ex h IIIC T120°C Db
- Explosive ambient temperature
- -20°C <= Ta <= +60°C
- Explosion prevention and protection
-
Zone 21 (ATEX)
Zone 1 (ATEX)
Zone 2 (ATEX)
Zone 22 (ATEX) - Operating medium
- Compressed air as per ISO 8573-1:2010 [7:4:4]
- Information on operating and pilot media
- Operation with oil lubrication possible (required for further use)
- CE marking (see declaration of conformity)
- as per EU explosion protection directive (ATEX)
- Corrosion resistance class (CRC)
-
3 - High corrosion stress
2 - Moderate corrosion stress - Ambient temperature
- -40 °C ... 150 °C
- Impact energy in the end positions
- 0.9 J ... 1.8 J
- Cushioning length
- 0 mm ... 31 mm
- Max. torque for protection against rotation
- 3 Nm
- Theoretical force at 6 bar, retracting
- 2721 N
- Theoretical force at 6 bar, advancing
- 2721 N ... 3016 N
- Moving mass at 0 mm stroke
- 810 g
- Additional weight per 10 mm stroke
- 92 g
- Basic weight with 0 mm stroke
- 2660 g
- Additional moving mass per 10 mm stroke
- 19 g
- Type of mounting
-
With internal thread
With accessories
Optionally: - Pneumatic connection
- G3/8
- Note on materials
- RoHS-compliant
- Cover material
- Die-cast aluminum
- Piston rod material
-
hochlegierter Stahl rostfrei, hartverchromt
hochlegierter Stahl
hochlegierter Stahl rostfrei - Material of cylinder barrel
- Wrought aluminum alloy
Similar products:
Festo ISO cylinder DSBC-50-400-PPVA-N3 ; 1366958
ISO profile cylinder to ISO 15552 with a wide range of mounting options. DSBC-50-400-PPVA-N3 Part no. 1366958 ISO 15552 (ISO 6431, VDMA 24562) Self-adjusting pneumatic
-
(Out of stock)
Price on request
Festo ISO cylinder DSBC-100-125-PPVA-N3 ; 1384809
ISO profile cylinder to ISO 15552 with a wide range of mounting options. DSBC-100-125-PPVA-N3 Part no. 1384809 ISO 15552 (ISO 6431, VDMA 24562) Self-adjusting pneumatic
-
(Out of stock)
Price on request
Festo ISO cylinder DNC-125-320-PPV-A ; 163506
Profile cylinder based on ISO 15552 standard with fixed or adjustable cushioning. DNC-125-320-PPV-A Part no. 163506 ISO 15552 (ISO 6431, VDMA 24562) Wide range of
-
(Out of stock)
Price on request
Festo ISO cylinder DSBC-63-50-PPVA-N3 ; 1383580
ISO 15552 (ISO 6431, VDMA 24562) Self-adjusting pneumatic end-position cushioning which adapts optimally to changes in load and speed Standard profile with two sensor
-
(Out of stock)
Price on request
Festo Round cylinder DSNU-40-50-PPV-A ; 196032
Wide range of variants for customized applications Good running performance and long service life Self-adjusting pneumatic end-position cushioning which adapts optimally
-
(Out of stock)
Price on request
Festo Guided actuator DFM-12-30-P-A-GF ; Pneumatic actuators
Guided actuator DFM-12-30-P-A-GF ; Pneumatic actuators
-
(Out of stock)
Price on request