Festo Profile cylinder to ISO 15552 DSBC ; 1463250
DSBC-Q-32-40-PPSA-N3 ISO profile cylinder to ISO 15552 with clamping fixture for the piston rod. A wide range of mounting options. Without additional measures for...
Price on request
DSBC-Q-32-40-PPSA-N3
ISO profile cylinder to ISO 15552 with clamping fixture for the piston rod. A wide range of mounting options. Without additional measures for compliance with statutory minimum requirements, the product is not suitable as a safety-relevant component in control systems.
ISO profile cylinder to ISO 15552 with clamping fixture for the piston rod. A wide range of mounting options. Without additional measures for compliance with statutory minimum requirements, the product is not suitable as a safety-relevant component in control systems.
- Piston rod can be held in any position
- Piston rod can be held in position for long periods even with alternating loads, fluctuating operating pressure, or leaks in the system
- Mounting hole pattern to ISO 15552
- Piston rod with internal or external thread
- Magnetic piston for position sensing
- Stroke
- 1 mm ... 2800 mm
- Piston diameter
- 32 mm
- Type code
- DSBC
- Cushioning
-
Self-adjusting pneumatic end-position cushioning
Elastic cushioning rings/pads at both ends
Pneumatic cushioning, adjustable at both ends - Mounting position
- Any
- Design
-
Profile barrel
Piston rod
Piston - Position sensing
- For proximity sensor
- Variants
-
With anti-twist protection
End-position locking at both ends
Constant, slow movement
Bellows on bearing cap
Through piston rod
Temperature range 0 to + 150 °C
For unlubricated operation
Low friction
End-position locking with piston rod retracted
Extended external thread piston rod
Sensor slots on 3 profile sides
End-position locking with piston rod extended
Extended piston rod
Hard scraper
Low friction for balancer applications
Internal thread on piston rod
Clamping unit attached
Temperature range -40 to 80 °C
Metal scraper
Piston rod at one end
Heat-resistant seals max. 120°C
Increased chemical resistance - Operating pressure
- 0.1 bar ... 12 bar
- Mode of operation
- Double-acting
- ATEX category gas
- II 2G
- Type of ignition protection for gas
- Ex h IIC T4 Gb
- ATEX category for dust
- II 2D
- Type of (ignition) protection for dust
- Ex h IIIC T120°C Db
- Explosive ambient temperature
- -20°C <= Ta <= +60°C
- Explosion prevention and protection
-
Zone 21 (ATEX)
Zone 2 (ATEX)
Zone 22 (ATEX)
Zone 1 (ATEX) - Operating medium
- Compressed air as per ISO 8573-1:2010 [7:4:4]
- Information on operating and pilot media
- Operation with oil lubrication possible (required for further use)
- CE marking (see declaration of conformity)
- as per EU explosion protection directive (ATEX)
- Corrosion resistance class (CRC)
-
3 - High corrosion stress
2 - Moderate corrosion stress - Ambient temperature
- -40 °C ... 150 °C
- Impact energy in the end positions
- 0.4 J
- Theoretical force at 6 bar, retracting
- 415 N
- Theoretical force at 6 bar, advancing
- 415 N ... 483 N
- Moving mass at 0 mm stroke
- 110 g
- Additional weight per 10 mm stroke
- 27 g
- Basic weight with 0 mm stroke
- 465 g
- Additional moving mass per 10 mm stroke
- 9 g
- Type of mounting
-
With internal thread
With accessories
Optionally: - Pneumatic connection
- G1/8
- Note on materials
- RoHS-compliant
- Cover material
-
Coated
Die-cast aluminum - Material of cylinder barrel
-
Wrought aluminum alloy
Smooth anodized
Similar products:
Festo ISO cylinder DSBC-40-100-PPVA-N3 ; 1376660
ISO 15552 (ISO 6431, VDMA 24562) Self-adjusting pneumatic end-position cushioning which adapts optimally to changes in load and speed Standard profile with two sensor
-
(Out of stock)
Price on request
Festo ISO cylinder DSBC-100-125-PPVA-N3 ; 1384809
ISO profile cylinder to ISO 15552 with a wide range of mounting options. DSBC-100-125-PPVA-N3 Part no. 1384809 ISO 15552 (ISO 6431, VDMA 24562) Self-adjusting pneumatic
-
(Out of stock)
Price on request
Festo ISO cylinder DNC-125-320-PPV-A ; 163506
Profile cylinder based on ISO 15552 standard with fixed or adjustable cushioning. DNC-125-320-PPV-A Part no. 163506 ISO 15552 (ISO 6431, VDMA 24562) Wide range of
-
(Out of stock)
Price on request
Festo Festo ISO cylinder DNC-125-200-PPV-A ; 163504
Profile cylinder based on ISO 15552 standard with fixed or adjustable cushioning. DNC-125-200-PPV-A Part no. 163504 ISO 15552 (ISO 6431, VDMA 24562) Wide range of
-
(Out of stock)
Price on request
Festo ISO cylinder to ISO 21287 ADN ; 536203
ADN-12-100-A-P-A SO cylinder to ISO 21287 for fixed or self-adjusting cushioning with high variance. ISO 21287 Up to 50% less installation space than comparable
-
(Out of stock)
Price on request
Festo ISO cylinder DSBC-63-50-PPVA-N3 ; 1383580
ISO 15552 (ISO 6431, VDMA 24562) Self-adjusting pneumatic end-position cushioning which adapts optimally to changes in load and speed Standard profile with two sensor
-
(Out of stock)
Price on request