INVERTEK DRIVES Optidrive Coolvert 40kW, 3ph input, heatsink; CV-540750-3FHE
Invertek Drives Optidrive Coolvert 40kW, 75A, 3ph input, heatsink; CV-540750-3FHE...
Price on request
Invertek Drives Optidrive Coolvert 40kW, 75A, 3ph input, heatsink; CV-540750-3FHE
Technical Specifications
| Input Ratings | Supply Voltage |
200 – 240V ± 10% 380 – 480V ± 10% |
| Supply Frequency | 48 – 62Hz | |
| Displacement Power Factor | > 0.98 | |
| Phase Imbalance | 3% Maximum allowed | |
| Inrush Current | < rated current |
| Output Ratings | Output Power |
200V: 7.0A to 20A 400V: 14A to 75A |
| Overload Capacity | 130% rated current for 10s | |
| Output Frequency | 0 – 500Hz | |
| Acceleration Time | 0.01 – 600 seconds | |
| Deceleration Time | 0.01 – 600 seconds | |
| Typical Efficiency | > 98% |
| Ambient Conditions | Temperature |
Storage: −40 to 70°C Operating: −20 to 60°C |
| Altitude |
Up to 1000m ASL without derating Up to 2000m maximum |
|
| Humidity | 95% Max, non condensing | |
| Vibration | Conforms to EN61800-5-1 |
| Enclosure | Ingress Protection (IP) |
Front IP20 Rear (Through Panel Mounting) IP55 |
| Coated PCBs | Designed for operation in 3S2/3C2 environments according to IEC 60721-3-3 |
| Programming | Modbus RTU (RS485) | Modbus RTU on Pluggable terminals and through RJ45 port |
| PC Tools | PC Tools software for Diagnostics and parameter configuration (RJ45 port only) | |
| Keypad | Optional Remote Keypad with TFT display for diagnostic and programming | |
| Smartphone app | Optitools Mobile |
| Control Specification | PWM Frequency | 4 – 32kHz |
| Control Modes |
Modbus RTU (RS485) Terminal Control Digital / Analogue Terminal Control PI mode Master / Slave Mode |
| Safe Torque Off (STO) | IEC 61800-5-2:2016 | SIL 3 |
| UL 61800-5-2 : 2022 | SIL 3 | |
| Independent Approval | TUV Rheinland / UL |
| Maintenance & Diagnostics | Fault Memory | Last 3 trips stored with time stamp |
| Data Logging | Logging of data prior to trip for diagnostic purposes | |
| Monitoring |
Hours Run Meter kWH |
| Conformance | The Coolvert product range conforms to the relevant safety provisions of the following council directives: 2014/30/EU (EMC), 2014/35/EU (LVD), 2006/42/EC (Machinery Directive), 2011/65/EU (RoHS 2) and 2009/125/EC (Eco-design) | |
| Design and manufacture is in accordance with the following harmonised European standards: | ||
| BSEN 61800-5-1: 2007 & A1: 2017 | Adjustable speed electrical power drive systems. Safety requirements. Electrical, thermal and energy. | |
| BSEN 61800-3:2018 | Adjustable speed electrical power drive systems. Part 3: EMC requirements and specific test methods (IEC 61800-3:2017). | |
| BSEN 61800-9-2:2017 | Adjustable speed electrical power drive systems. Part 9-2: Ecodesign for power drive systems, motor starters, power electronics and their driven applications – Energy efficiency indicators for power drive systems and motor starters (IEC 61800-9-2:2017). | |
| BSEN 60529: 1992 & A2: 2013 | Specifications for degrees of protection provided by enclosures | |
| UL 61800-5-1 |
cUL Listed cUR Recognised for the coldplate variants |
|
| BSEN 61000-3-12: 2011 | Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low voltage systems with input current >16 A and ≤ 75 A per phase | |
|
BSEN 61000-3-2:2019 (single phase input variants only) |
Electromagnetic compatibility (EMC).Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase) | |
-
(82-COOLV-IN) Coolvert User Guide V1.05
-
(82-CVQSG-IN) Coolvert Quick Start Guide V1.00
-
85-CVB-IN V3.00 Optidrive Coolvert Brochure WEB
Similar products:
INVERTEK DRIVES Optidrive Coolvert 40kW, 3ph input, coldpate; CV-540750-3FCE
Invertek Drives Optidrive Coolvert 40kW, 3ph input, coldpate; CV-540750-3FCE
-
(Out of stock)
Price on request
INVERTEK DRIVES Optidrive Coolvert 5.5kW, 1ph input, heatsink; CV-220200-1FHP
Invertek Drives Optidrive Coolvert 5.5kW, 20A, 1ph input, heatsink; CV-220200-1FHP
-
(Out of stock)
Price on request
INVERTEK DRIVES Optidrive Coolvert 40kW, 3ph input, coldpate; CV-540750-3FCE
Invertek Drives Optidrive Coolvert 40kW, 3ph input, coldpate; CV-540750-3FCE
-
(Out of stock)
Price on request
INVERTEK DRIVES Optidrive Coolvert 5.5kW, 1ph input, heatsink; CV-220200-1FHP
Invertek Drives Optidrive Coolvert 5.5kW, 20A, 1ph input, heatsink; CV-220200-1FHP
-
(Out of stock)
Price on request