200 – 240V ± 10%
380 – 480V ± 10%
500 – 600V ± 10%

48 – 62Hz

> 0.98

3% Maximum allowed

< rated current

120 per hour maximum, evenly spaced

230V 1 Phase: 0.75–7.5kW / 1–10HP
230V 3 Phase: 0.75–75kW / 1–100HP
400V 3 Phase: 0.75–250kW
460V 3 Phase: 1–350HP
575V 3 Phase: 0.75–110kW / 1–150HP

150% for 60 seconds

0 – 500Hz, 0.1Hz resolution

0.01 – 600 seconds

0.01 – 600 seconds

98%

Storage : −40 to 60°C
Operating : −10 to 50°C

Up to 1000m ASL without derating
Up to 2000m maximum UL Approved
Up to 4000m maximum (non UL)

95% Max, non-condensing

Conforms to IEC 60068-2-6
Sinusoidal Vibration
10 - 57Hz @ 0.075mm Pk
57 - 150Hz @ 1g Pk

IP20, IP55, IP66

Built-in keypad as standard
Optional remote mountable keypad

Built-in multi language text display

OptiTools Studio

V/F Voltage Vector
Energy Optimsied V/F
3GV Sensorless Vector Speed Control
3GV Sensorless Vector Torque Control
Closed Loop (Encoder) Speed Control
Closed Loop (Encoder) Torque Control
PM Vector Control
BLDC Control
Synchronous Reluctance

4 – 32kHz Effective

Ramp to Stop: User Adjustable 0.01–600 secs
Coast to Stop

Motor Flux Braking
Built-in Braking Transistor

Single point, user adjustable

24 Volt DC, 100mA, Short Circuit Protected
10 Volt DC, 10mA for Potentiometer

5 Total as standard (Optional additional 3)
3 Digital (Optional additional 3)
2 Analog / Digital Selectable

Opto - Isolated
8 – 30 Volt DC, internal or external supply
Response time < 4ms

Resolution : 12 bits
Response time : < 4ms
Accuracy : < 1% full scale
Parameter adjustable scaling and offset

Motor PTC / Thermistor Input
Trip Level : 3kΩ

4 Total (Optional additional 3)
2 Analog / Digital
2 Relays (Optional additional 3)

Maximum Voltage : 250 VAC, 30 VDC
Switching Current Capacity : 5A AC , 5A DC

0 to 10 Volt
0 to 20mA
4 to 20mA

Internal PID Controller
Multi Setpoint Select
Standby / Sleep Mode
Boost Function

Dedicated Hoist Mode
Motor Holding Brake Pre-Torque & Control
Over Limit Protection

Last 4 Trips stored with time stamp

Logging of data prior to trip for diagnostic purposes : Output Current, Drive Temperature, DC Bus Voltage

Maintenance Indicator with user adjustable maintenance interval
Onboard service life monitoring

Hours Run Meter
Resettable & Non Resettable kWh meters
Cooling Fan Run Time

2014/35/EU

2014/30/EU

UL, cUL, EAC, RCM

DNV Type Approval

IP20 products: Designed for use in environments where the level of chemically active substances does not exceed the limits of class 3C2, and where the levels of mechanically active substances do not exceed the limits of class 3S2 according to IEC60721-3.
IP55 & IP66 products: Designed for use in environments where the level of chemically active substances does not exceed the limits of class 3C3, and where the levels of mechanically active substances do not exceed the limits of class 3S3 according to IEC60721-3.