Name: Klemsan Mrežni analizator KLEA 320P-DC; 606150
Brand: Klemsan
SKU: 606150
Price: 43550.78 RSD
Availability: OutOfStock

Klemsan Mrežni analizator KLEA 320P-DC; 606150

Mrežni analizator KLEA 320P-DC; 606150...

Brand: Klemsan
Product Code: 606150
Availability: Check availability

VAT-exclusive price: 36.292,32

VAT-inclusive price: 43.550,78

Qnt:

Mrežni analizator KLEA 320P-DC; 606150

General		Seven Segment Display
		LCD Screen	✔
		Language Support	Turkish, English, Russian
		Battery	✔
		Real Time Clock	✔
		Password Protection	✔
		Current Transformer Ratio	1-5.000
		Voltage Transformer Ratio	1-5.000
		Demand Period	1-60 min. adjustable
		Connection Type	3F4T, 3F3T, Aron
		Measurements in Quadrants	4
		Number of Measurements in a Period	512
		LCD/Display Refresh Period	1sn
		Networks	TT, TN, IT
		Phasor Diagram	✔
		Signal Waveforms	✔
		Min./Max./Demand Values	✔
Energy Measurement		Number of Tariffs	7
		Multi Sub-Tariffs (Peak, Day and Off-Peak)	✔
		1Ø Phase Energy Meters
		3Ø Phase Energy Meters	✔
		4 Quadrant Reactive Energy Meters
Current Measurement Input		Measurement Range	10mA - 6A AC
		Overvoltage Category	300 V Cat II
		Measurement Surge Voltage	2 kV
		Power Consumption	<0.2 VA
		Intermittent Overload	100 A for 1 sec.
		Sampling Frequency between 45-65 Hz	25.6 kHz
Voltage Measurement Input		Overvoltage Category	300 V Cat III
		Measured Range L-N	1-300 Vrms
		Measured Range L-L	2-500 Vrms
		Measured Frequency Range	45-65 Hz
		Power Consumption	<0.1 VA
		Sampling Frequency between 45-65 Hz	25.6 kHz
Power Quality Measurements		Harmonics for Current and Voltage Phases	Up to 51st
		THD - Voltage in %	✔
		THD - Current in %	✔
Other Measurements		Run Hour (Operating Time for Load in Hours)
		On Hour (Operating Time for Meter in Hours)
		Int Counter (Number of Power Interruptions)
Measurement Accuracy	According to IEC 61557-12	Total Active Power	Class 0.2
		Total Reactive Power	Class 1
		Total Apparent Power	Class 0.2
		Total Active Energy	Class 0.5
		Total Reactive Energy	Class 2
		Frequency	Class 0.05
		Current	Class 0.2
		Neutral Current	Class 0.5
		Voltage	Class 0.2
		Power Factor	Class 0.5
		THDV, THDI	Class 1
	According to IEC 62053-22	Total Active Energy	Class 0.2S
	According to IEC 62053-23	Total Reactive Energy	Class 2
Inputs and Outputs	Alarm Relay Outputs	Number of Outputs	2
		Type	NO (SPST)
		Max. Switching Current	10 A
		Max. Switching Voltage	250 VAC
		Max. Switching Power	1250 VA
	Digital Inputs	Number of Inputs	2
		Minimum Counting Frequency	100 Hz, 10 ms
		Input Present or Not	Dry Contact
		Isolation Level	5000 Vrms
	Digital Outputs	Number of Outputs	2
		Type	Transistör
		Switching Voltage Range	5-30 VDC
		Minimum Switching Frequency	20 Hz, 50 ms
		Isolation Level	5000 Vrms
	Analog Outputs	Number of Outputs	2
		Range of Outputs 0-5 V, 0-10 V, -5-5 V, -10-10V, 0-20 mA, 4-20 mA
		Isolation	5000 Vrms
Supply	Voltage	DC	18...60VDC
	Consumption	DC	<2.5W
Data Logging with timestamp	Min./Max./Avg. Values	Hourly Records	1920 Hours x 68 Different Paramaters
		Daily Records	240 Days x 68 Different Paramaters
		Monthly Records	36 Months x 68 Different Parameters
Data Logging with timestamp		Demand	4 Months x 16 Different Parameters
		Alarm Records	50
Communication		Protocol	Modbus RTU
		Baud Rate	2400-115200 bps adjustable
		Parity Number	None
		Stop Bit	1
		Address	1-247
		Isolation	2750V RMS
Mechanical Properties		Weight (g)	404 g
		Protection Class	Front IP40 / Rear IP20
		Mounting Type	Panel Mount
Cable Cross Sections	Supply, Voltage, Current, Relay Outputs	Stranded:	2.5mm² - 14AWG
		Solid:	4mm² - 12AWG, 2x1.5mm² - 2x16AWG
	Digital I/O, RS 485, Analog Output	Stranded:	1.5mm² - 16AWG
		Solid:	1.5mm² - 16AWG, 2x0.75mm² - 2x18AWG
Ambient Conditions		Operating Temperature	-20 to +70°C
		Storing Temperature	-30 to +80°C
		Relative Humidity (No Condensation)	Maks. 95%
EMC-EMI		300 VAC CAT II according to IEC 61010-1	✔
		EN 55011/A1:2010, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8, EN61000-4-11	✔