Name: Klemsan Multimetar ECRAS 100 ; 606210
Brand: Klemsan
SKU: 606210
Price: 15399.79 RSD
Availability: InStock

Klemsan Multimetar ECRAS 100 ; 606210

Multimeter ECRAS by KLEMSAN is an advanced multimeter that can measure 3 phases in electric networks and can be controlled by 2 relay outputs. ECRAS offers a very...

Brand: Klemsan
Product Code: 606210
Availability: In stock

VAT-exclusive price: 12.833,16

VAT-inclusive price: 15.399,79

Qnt:

Multimeter ECRAS by KLEMSAN is an advanced multimeter that can measure 3 phases in electric networks and can be controlled by 2 relay outputs. ECRAS offers a very precise measurements of basic electrical network. All measured data can be transferred to the remote monitoring system via modbus communication. Low/high limit threesold values for all electrical parameters can be defined and assigned to alarm relay outputs.

General		Seven Segment Display	✔
		Password Protection	✔
		Current Transformer Ratio	1 - 5000
		Voltage Transformer Ratio	1 - 5000
		Demand Period	1-60 min. adjustable
		Connection Type	3F4T, 3F3T
		Measurements in Quadrants	4
		Number of Measurements in a Period	256
		LCD/Display Refresh Period	1 sec.
		Networks	TT, TN, IT
		Min./Max./Demand Values	✔
Energy Measurement		Number of Tariffs	1
		1Ø Phase Energy Meters	✔
		3Ø Phase Energy Meters	✔
Current Measurement Input		Measurement Range	10mA - 6A AC
		Overvoltage Category	300 V Cat II
		Measurement Surge Voltage	2 kV
		Power Consumption	<0.2 VA
		Intermittent Overload	100 A for 1 sec.
		Sampling Frequency between 45-65 Hz	12.8 kHz
Voltage Measurement Input		Overvoltage Category	300 V Cat III
		Measured Range L-N	1-300 Vrms
		Measured Range L-L	2-500 Vrms
		Measured Frequency Range	45-65 Hz
		Power Consumption	<0.1 VA
		Sampling Frequency between 45-65 Hz	12.8 kHz
Power Quality Measurements		Harmonics for Current and Voltage Phases	Up to 31st
		THD - Voltage in %	✔
		THD - Current in %	✔
Other Measurements		Run Hour (Operating Time for Load in Hours)	✔
		On Hour (Operating Time for Meter in Hours)	✔
		Int Counter (Number of Power Interruptions)	✔
Measurement Accuracy	According to IEC 61557-12	Total Active Power	Class 0.5
		Total Reactive Power	Class 1
		Total Apparent Power	Class 0.5
		Total Active Energy	Class 0.5
		Total Reactive Energy	Class 2
		Frequency	Class 0.1
		Current	Class 0.5
		Neutral Current	Class 0.5
		Voltage	Class 0.2
		Power Factor	Class 0.5
		THDV, THDI	Class 1
	According to IEC 62053-22	Total Active Energy	Class 0.5S
	According to IEC 62053-23	Total Reactive Energy	Class 2
Inputs and Outputs	Alarm Relay Outputs	Type
		Max. Switching Current	10 A
Supply	Voltage	AC	85-300V
		DC	85-300V
	Consumption	AC	<6VA
		DC	<3W
Supply		Frequency	45-65Hz
Data Logging with timestamp	Min./Max./Avg. Values	Hourly Records
		Daily Records
		Monthly Records
Data Logging with timestamp		Demand
Mechanical Properties		Weight (g)	272 g
		Protection Class	Front IP40 / Rear IP20
		Mounting Type	Panel Mount
Cable Cross Sections	Supply, Voltage, Current, Relay Outputs	Stranded:	2.5mm² - 14AWG
		Solid:	4mm² - 12AWG, 2x1.5mm² - 2x16AWG
Ambient Conditions		Operating Temperature	-20°C +70°C
		Storing Temperature	-30°C +80°C
		Relative Humidity (No Condensation)	Max. 95%
EMC-EMI		300 VAC CAT II according to IEC 61010-1	✔
		EN 55011/A1:2010, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5, EN 61000-4-6, EN 61000-4-8, EN61000-4-11	✔
Schematics		Network Connections
		Digital I/O and Alarm Output Connections
		3 wires with 3CTs
		4 wires with 3CTs
		3 wires with 2CTsNOTE: CTs can be connected any phase. They are connected to phase 1 and phase 3 in this figure.
		Single Phase with 1CTNORE: CT and VT can be connected any phase. They are connected to phase 1 in this figure.
		Digital Output Connection
		Digital Input Connection
		Alarm Output Connection
		Analog Output Connection