Siemens ET 200MP, IM 155-5 PN ST; 6ES7155-5AA01-0AB0
SIMATIC ET 200MP. PROFINET IO-DEVICE INTERFACEMODULE IM 155-5 PN ST FOR ET 200MP ELEKTRONIKMODULES; UP TO 12 IO-MODULES WITHOUT ADDITIONAL PS; UP TO 30 IO- MODULES...
Price on request
SIMATIC ET 200MP. PROFINET IO-DEVICE INTERFACEMODULE IM 155-5 PN ST FOR ET 200MP ELEKTRONIKMODULES; UP TO 12 IO-MODULES WITHOUT ADDITIONAL PS; UP TO 30 IO- MODULES WITH ADDITIONONAL PS SHARED DEVICE; MRP; IRT >=0.25MS; ISOCHRONICITY FW-UPDATE; I&M0...3; FSU WITH 500MS
|
General information |
|
| Product type designation | IM 155-5 PN ST |
| HW functional status | From FS01 |
| Firmware version | V4.1.0 |
| Vendor identification (VendorID) | 0x002A |
| Device identifier (DeviceID) | 0X0312 |
| Product function | |
| ● I&M data | Yes; I&M0 to I&M3 |
| ● Module swapping during operation (hot swapping) | No |
| ● Isochronous mode | Yes |
| Engineering with | |
| ● STEP 7 TIA Portal configurable/integrated from version | V14 or higher with HSP 0223 / integrated with V15 or higher |
| ● STEP 7 configurable/integrated from version | GSDML V2.32 |
| ● PROFINET from GSD version/GSD revision | V2.3 / - |
| Configuration control | |
| via user data | No |
| via dataset | Yes |
| Supply voltage | |
| Rated value (DC) | 24 V |
| permissible range, lower limit (DC) | 19.2 V |
| permissible range, upper limit (DC) | 28.8 V |
| Reverse polarity protection | Yes |
| Short-circuit protection | Yes |
| Mains buffering | |
| ● Mains/voltage failure stored energy time | 10 ms |
| Input current | |
| Current consumption (rated value) | 0.2 A |
| Current consumption, max. | 1.2 A |
| Inrush current, max. | 9 A |
| I²t | 0.09 A²·s |
| Power | |
| Infeed power to the backplane bus | 14 W |
| Power available from the backplane bus | 2.3 W |
| Power loss | |
| Power loss, typ. | 4.5 W |
| Address area | |
| Address space per module | |
| ● Address space per module, max. | 256 byte; per input / output |
| Address space per station | |
| ● Address space per station, max. | 512 byte; per input / output |
| Hardware configuration | |
| Integrated power supply | Yes |
| System power supply can be plugged in to left of IM | Yes |
| Number of permissible power segments | 3 |
| Rack | |
| ● Modules per rack, max. | 30; I/O modules |
| Interfaces | |
| Number of PROFINET interfaces | 1 |
| 1. Interface | |
| Interface types | |
| ● RJ 45 (Ethernet) | Yes |
| ● Number of ports | 2 |
| ● integrated switch | Yes |
| Protocols | |
| ● PROFINET IO Device | Yes |
| ● Open IE communication | Yes |
| ● Media redundancy | Yes; PROFINET MRP |
| Interface types | |
| RJ 45 (Ethernet) | |
| ● Transmission procedure | PROFINET with 100 Mbit/s full duplex (100BASE-TX) |
| ● 100 Mbps | Yes |
| ● Autonegotiation | Yes |
| ● Autocrossing | Yes |
| Protocols | |
| PROFINET IO Device | |
| Services | |
| — IRT | Yes |
| — PROFIenergy | No |
| — Prioritized startup | Yes |
| — Shared device | Yes |
| — Number of IO Controllers with shared device, max. | 2 |
| Redundancy mode | |
| ● PROFINET system redundancy (S2) | No |
| ● PROFINET system redundancy (R1) | No |
| Media redundancy | |
| — MRP | Yes |
| — MRPD | No |
| Open IE communication | |
| ● TCP/IP | Yes |
| ● SNMP | Yes |
| ● LLDP | Yes |
| Isochronous mode | |
| Equidistance | Yes |
| shortest clock pulse | 250 µs |
| max. cycle | 4 ms |
| Interrupts/diagnostics/status information | |
| Status indicator | Yes |
| Alarms | Yes |
| Diagnostics function | Yes |
| Diagnostics indication LED | |
| ● RUN LED | Yes; green LED |
| ● ERROR LED | Yes; red LED |
| ● MAINT LED | Yes; Yellow LED |
| ● Connection display LINK TX/RX | Yes; 2x green-yellow LEDs |
| Potential separation | |
| between backplane bus and electronics | No |
| between PROFINET and all other circuits | Yes |
| between supply and all other circuits | No |
| Isolation | |
| Isolation tested with | 707 V DC (type test) |
| Ambient conditions | |
| Ambient temperature during operation | |
| ● horizontal installation, min. | -25 °C; From FS03 |
| ● horizontal installation, max. | 60 °C |
| ● vertical installation, min. | -25 °C; From FS03 |
| ● vertical installation, max. | 40 °C |
| Altitude during operation relating to sea level | |
| ● Installation altitude above sea level, max. | 5 000 m; Restrictions for installation altitudes > 2 000 m, see manual |
| connection method / header | |
| ET-Connection | |
| ● via BU/BA Send | No |
| Dimensions | |
| Width | 35 mm |
| Height | 147 mm |
| Depth | 129 mm |
| last modified: | 4/26/2021 |
Similar products:
Siemens ET 200MP, IM 155-5 PN BA; 6ES7155-5AA00-0AA0
SIMATIC ET 200MP PROFINET IO device Interface module IM 155-5 PN BA for ET 200MP electronic modules; up to 12 IO modules; Integrated 2-port switch; RJ45 Shared Device
-
(Out of stock)
Price on request
Siemens ET 200MP, IM 155-5 PN HF; 6ES7155-5AA00-0AC0
SIMATIC ET 200MP. PROFINET IO device Interface module IM 155-5 PN HF, for ET 200MP electronic modules; Up to 12 IO modules without PS; Up to 30 IO modules with additional
-
(Out of stock)
Price on request
Siemens ET 200MP, IM155-5 DP ST; 6ES7155-5BA00-0AB0
SIMATIC ET 200MP. PROFIBUS connection IM 155-5 DP ST for max. 12 S7-1500 modules Including PROFIBUS connection plug (6ES7972-0BB70-0XA0
-
(Out of stock)
Price on request
Siemens S7-1500, AI 8 X U/R/RTD/TC HF; 6ES7531-7PF00-0AB0
SIMATIC S7-1500 analog input module AI 8xU/R/RTD/TC HF, 16 bit resolution, up to 21 bit Resolution at RT and TC, accuracy 0.1%, 8 channels in groups of 1; common
-
(Out of stock)
Price on request
Siemens SIMATIC S7-1500, Front connector in push-in design, 40-pole, for 35 mm wide modules; 6ES7592-1BM00-0XB0
SIMATIC S7-1500, Front connector in push-in design, 40-pole, for 35 mm wide modules incl. 4 potential bridges and cable ties
-
(Out of stock)
4.608,55