Siemens ET 200SP, AI 2xU Standard, PU 1; 6ES7134-6FB00-0BA1
SIMATIC ET 200SP, Analog input module, AI 2xU Standard Pack quantity: 1 unit, suitable for BU type A0, A1, Color code CC00, Module diagnostics, 16 bit...
Price on request
SIMATIC ET 200SP, Analog input module, AI 2xU Standard Pack quantity: 1 unit, suitable for BU type A0, A1, Color code CC00, Module diagnostics, 16 bit |
General information | |
Product type designation | AI 2xU ST |
HW functional status | from FS04 |
Firmware version | |
● FW update possible | Yes |
usable BaseUnits | BU type A0, A1 |
Color code for module-specific color identification plate | CC00 |
Product function | |
● I&M data | Yes; I&M0 to I&M3 |
● Isochronous mode | No |
● Measuring range scalable | No |
Engineering with | |
● STEP 7 TIA Portal configurable/integrated from version | V13 SP1 |
● STEP 7 configurable/integrated from version | V5.5 SP3 / - |
● PROFIBUS from GSD version/GSD revision | One GSD file each, Revision 3 and 5 and higher |
● PROFINET from GSD version/GSD revision | GSDML V2.3 |
Operating mode | |
● Oversampling | No |
● MSI | No |
CiR - Configuration in RUN | |
Reparameterization possible in RUN | Yes |
Calibration possible in RUN | No |
Supply voltage | |
Rated value (DC) | 24 V |
permissible range, lower limit (DC) | 19.2 V |
permissible range, upper limit (DC) | 28.8 V |
Reverse polarity protection | Yes |
Input current | |
Current consumption, max. | 37 mA |
Encoder supply | |
24 V encoder supply | |
● 24 V | No |
Additional 24 V encoder supply | |
● 24 V | No |
Power loss | |
Power loss, typ. | 0.9 W |
Address area | |
Address space per module | |
● Address space per module, max. | 4 byte; + 1 byte for QI information |
Hardware configuration | |
Automatic encoding | Yes |
● Mechanical coding element | Yes |
● Type of mechanical coding element | Type A |
Selection of BaseUnit for connection variants | |
● 1-wire connection | BU type A0, A1 |
● 2-wire connection | BU type A0, A1 |
Analog inputs | |
Number of analog inputs | 2 |
● For voltage measurement | 2 |
permissible input voltage for voltage input (destruction limit), max. | 30 V |
Cycle time (all channels), min. | 500 µs |
Input ranges (rated values), voltages | |
● 0 to +10 V | Yes; 15 bit |
— Input resistance (0 to 10 V) | 180 kΩ |
● 1 V to 5 V | Yes; 15 bit |
— Input resistance (1 V to 5 V) | 180 kΩ |
● -10 V to +10 V | Yes; 16 bit incl. sign |
— Input resistance (-10 V to +10 V) | 180 kΩ |
● -5 V to +5 V | Yes; 16 bit incl. sign |
— Input resistance (-5 V to +5 V) | 180 kΩ |
Cable length | |
● shielded, max. | 200 m |
Analog value generation for the inputs | |
Measurement principle | Sigma Delta |
Integration and conversion time/resolution per channel | |
● Resolution with overrange (bit including sign), max. | 16 bit |
● Integration time, parameterizable | Yes |
● Interference voltage suppression for interference frequency f1 in Hz | 16.6 / 50 / 60 Hz / off |
● Conversion time (per channel) | 50 ms @ 60 Hz, 60 ms @ 50 Hz, 180 ms @ 16.6 Hz, 250 µs without filter |
Smoothing of measured values | |
● Number of smoothing levels | 4 |
● parameterizable | Yes |
● Step: None | Yes; 1x cycle time |
● Step: low |
Similar products:
Siemens ET 200SP, AI 8xRTD/TC 2-Wire HF; 6ES7134-6JF00-0CA1
SIMATIC ET 200SP, Analog input module, AI 8xRTD/TC 2-wire High Feature suitable for BU type A0, A1, Color code CC00, channel diagnostics, 16 bit, +/-0.1%
-
(Out of stock)
Price on request
Siemens ET 200SP AI 2 X U/I 2-, 4-Wire HF; 6ES7134-6HB00-0CA1
SIMATIC ET 200SP, Analog input module, AI 2x U/I 2-.4-wire High Feat., suitable for BU type A0, A1, Color code CC05, channel diagnostics, 16 bit, +/-0.1%
-
(Out of stock)
Price on request
Siemens ET 200SP, AI 4XI 2-WIRE 4...20MA HART; 6ES7134-6TD00-0CA1
SIMATIC ET 200SP, analog HART input module, AI 4XI 2-wire HART High Feature suitable for BU type A0, A1, color code CC03, channel diagnostics, 16-bit, +/-0.3%,
-
(Out of stock)
Price on request
Siemens ET 200SP, AI 8xU Basic; 6ES7134-6FF00-0AA1
SIMATIC ET 200SP, Analog input module, AI 8XU Basic, suitable for BU type A0, A1, Color code CC02, Module diagnostics, 16 bit
-
(Out of stock)
Price on request
Siemens ET 200SP AI Energy Meter CT HF; 6ES7134-6PA01-0CU0
SIMATIC ET 200SP, analog input module, AI Energy Meter CT HF, for 1A or 5A current transformer, with network analysis functions, suitable for BU type U0, channel
-
(Out of stock)
Price on request
Siemens ET 200SP AI Energy Meter RC HF; 6ES7134-6PA21-0CU0
SIMATIC ET 200SP, analog input module, AI Energy Meter RC HF, for Rogowski coils or current/voltage transformer 333 mV, with network analysis functions, suitable
-
(Out of stock)
Price on request