Siemens ET 200SP, AQ 4xI HART HF; 6ES7135-6TD00-0CA1
SIMATIC ET 200SP, analog HART output module, AQ 4xI HART High Feature, suitable for BU type A0, A1, Color code CC00, channel diagnostics, 16 bit, +/-0.3%...
Price on request
| SIMATIC ET 200SP, analog HART output module, AQ 4xI HART High Feature, suitable for BU type A0, A1, Color code CC00, channel diagnostics, 16 bit, +/-0.3% |
| General information | |
| Product type designation | AQ 4xI HART HF |
| Firmware version | V1.0 |
| ● FW update possible | Yes |
| usable BaseUnits | BU type A0, A1 |
| Color code for module-specific color identification plate | CC00 |
| Product function | |
| ● I&M data | Yes; I&M0 to I&M3 |
| Engineering with | |
| ● STEP 7 TIA Portal configurable/integrated from version | V15 SP1 |
| ● STEP 7 configurable/integrated from version | V5.6 and higher |
| ● PCS 7 configurable/integrated from version | V9.0 SP1 |
| ● PROFIBUS from GSD version/GSD revision | V04.02.14 |
| ● PROFINET from GSD version/GSD revision | GSDML V2.34 |
| CiR - Configuration in RUN | |
| Reparameterization possible in RUN | Yes |
| Calibration possible in RUN | No |
| Supply voltage | |
| Rated value (DC) | 24 V |
| permissible range, lower limit (DC) | 19.2 V |
| permissible range, upper limit (DC) | 28.8 V |
| Reverse polarity protection | Yes |
| Input current | |
| Current consumption (rated value) | 115 mA |
| Current consumption, max. | 125 mA |
| Power loss | |
| Power loss, typ. | 1.7 W |
| Address area | |
| Address space per module | |
| ● Address space per module, max. | 8 byte; + 1 byte for QI information |
| ● Address space per module with HART, max. | 28 byte; + 1 byte for QI information |
| Hardware configuration | |
| Automatic encoding | |
| ● Mechanical coding element | Yes |
| ● Type of mechanical coding element | Type A |
| Analog outputs | |
| Number of analog outputs | 4 |
| Current output, no-load voltage, max. | 28 V |
| Cycle time (all channels), min. | 3 ms |
| Output ranges, current | |
| ● 0 to 20 mA | Yes; 16 bit incl. sign |
| ● -20 mA to +20 mA | No |
| ● 4 mA to 20 mA | Yes; 16 bit incl. sign |
| Connection of actuators | |
| ● for current output two-wire connection | Yes |
| Load impedance (in rated range of output) | |
| ● with current outputs, max. | 750 Ω |
| ● with current outputs, inductive load, max. | 10 mH |
| Destruction limits against externally applied voltages and currents | |
| ● Voltages at the outputs | 30 V |
| Cable length | |
| ● shielded, max. | 800 m |
| Analog value generation for the outputs | |
| Settling time | |
| ● for resistive load | 2 ms; 750 ohm |
| ● for capacitive load | 2 ms |
| ● for inductive load | 2 ms |
| Errors/accuracies | |
| Output ripple (relative to output range, bandwidth 0 to 50 kHz), (+/-) | 0.02 % |
| Linearity error (relative to output range), (+/-) | 0.03 % |
| Temperature error (relative to output range), (+/-) | 0.003 %/K |
| Crosstalk between the outputs, min. | -50 dB |
| Repeat accuracy in steady state at 25 °C (relative to output range), (+/-) | 0.03 % |
| Operational error limit in overall temperature range | |
| ● Current, relative to output range, (+/-) | 0.3 %; 0 ... 60 °C: 0.2 % |
| Basic error limit (operational limit at 25 °C) | |
| ● Current, relative to output range, (+/-) | 0.1 % |
| Protocols | |
| HART protocol | Yes |
| Interrupts/diagnostics/status information | |
| Diagnostics function | Yes |
| Substitute values connectable | Yes |
| Alarms | |
| ● Diagnostic alarm | Yes |
| Diagnoses | |
Similar products:
Siemens ET 200SP, DQ 4x24VDC/2A HF; 6ES7132-6BD20-0CA0
SIMATIC ET 200SP, digital output module, DQ 4x 24VDC/2A High Feature, suitable for BU type A0, Color code CC02, channel diagnostics
-
(Out of stock)
Price on request
Siemens ET 200SP, AQ 4xU/I ST; 6ES7135-6HD00-0BA1
SIMATIC ET 200SP, Analog output module, AQ 4XU/I Standard, suitable for BU type A0, A1, Color code CC00, Module diagnostics, 16 bit, +/-0.3%
-
(In stock)
Price on request
Siemens ET 200SP, AQ 2xU Standard, PU 1; 6ES7135-6FB00-0BA1
SIMATIC ET 200SP, Analog output module, AQ 2xU Standard, Pack quantity: 1 unit, suitable for BU type A0, A1, Color code CC00, Module diagnostics, 16 bit
-
(Out of stock)
Price on request
Siemens ET 200SP, AQ 2xI Standard, PU 1; 6ES7135-6GB00-0BA1
SIMATIC ET 200SP, Analog output module, AQ 2xI Standard, Pack quantity: 1 unit, suitable for BU type A0, A1, Color code CC00, Module diagnostics, 16 bit
-
(Out of stock)
Price on request
Siemens ET 200SP, AQ 2 X U/I High Speed; 6ES7135-6HB00-0DA1
SIMATIC ET 200SP, Analog output module, AQ 2x U/I High Speed, suitable for BU type A0, A1, Color code CC00, channel diagnostics, 16 bit, +/-0.2%
-
(Out of stock)
Price on request
Siemens ET 200SP, AQ 2 X U/I High Feature; 6ES7135-6HB00-0CA1
SIMATIC ET 200SP, Analog output module, AQ 2x U/I High Feature suitable for BU type A0, A1, Color code CC00, channel diagnostics, 16 bit, +/-0.1%
-
(Out of stock)
Price on request