Siemens ET 200SP CM CAN; 6ES7137-6EA00-0BA0
ET 200SP, CM CAN Gateway to CAN or CANopen networks, CAN 2.0A/B, CANopen Manager to CiA301/302, CANopen Slave to CiA301/302, IP20...
Price on request
ET 200SP, CM CAN Gateway to CAN or CANopen networks, CAN 2.0A/B, CANopen Manager to CiA301/302, CANopen Slave to CiA301/302, IP20 |
General information | |
Product type designation | CM 1x CAN ST |
Firmware version | V1.0.1 |
● FW update possible | Yes |
usable BaseUnits | BU type A0 |
Color code for module-specific color identification plate | CC00 |
Product function | |
● I&M data | Yes; I&M0 to I&M3 |
● Module swapping during operation (hot swapping) | Yes |
● Isochronous mode | No |
Engineering with | |
● STEP 7 TIA Portal configurable/integrated from version | STEP 7 V15.1 or higher |
Supply voltage | |
Rated value (DC) | 24 V |
permissible range, lower limit (DC) | 19.2 V |
permissible range, upper limit (DC) | 28.8 V |
Reverse polarity protection | Yes |
Input current | |
Current consumption, typ. | 20 mA |
Current consumption, max. | 25 mA |
Power loss | |
Power loss, typ. | 0.5 W |
Address area | |
Address space per module | |
● Address space per module, max. | 256 byte |
1. Interface | |
Interface type | CAN according to CiA 303-1 |
Isolated | Yes; 500 V AC or 707 V DC |
Interface types | |
● Number of ports | 1 |
● Design of the connection | Push-in terminal |
CAN | |
● CAN operating modes | CAN Standard CAN 2.0A/B; CANopen Manager / Slave acc. to CiA |
● Specification acc. to CiA | CiA 301 & CiA 302 |
● Transmission rate, min. | 10 kbit/s |
● Transmission rate, max. | 1 000 kbit/s |
● Number of slaves, max. | 60 |
● Number of SDOs in parallel | 16; Parallel |
● Number of PDOs | 128; Send / receive |
Services | |
— Node/life-guarding | Yes |
— Heartbeat | Yes |
— SYNC | Yes |
Interrupts/diagnostics/status information | |
Alarms | Yes |
Diagnostics function | Yes |
Diagnostics indication LED | |
● RUN LED | Yes |
● ERROR LED | Yes |
● MAINT LED | No |
● Monitoring of the supply voltage (PWR-LED) | Yes; green PWR LED |
Potential separation | |
between backplane bus and interface | Yes |
Isolation | |
Isolation tested with | 707 V DC (type test) |
Standards, approvals, certificates | |
CE mark | Yes |
UL approval | Yes |
RCM (formerly C-TICK) | Yes |
KC approval | Yes; Reg. No.: R-R-S49-ET200SPCMCAN |
EAC (formerly Gost-R) | Yes |
RoHS conformity | Yes |
Ambient conditions | |
Ambient temperature during operation | |
● horizontal installation, min. | -30 °C |
● horizontal installation, max. | 60 °C |
● vertical installation, min. | -30 °C |
● vertical installation, max. | 50 °C |
● ceiling installation, min. | -30 °C |
● ceiling installation, max. | 50 °C |
● floor installation, min. | -30 °C |
● floor installation, max. | 50 °C |
Altitude during operation relating to sea level | |
● Installation altitude above sea level, max. |
Similar products:
Siemens ET 200SP, CM 1x DALI; 6ES7137-6CA00-0BU0
SIMATIC ET 200SP, CM 1x DALI, DALI master module, integrated DALI bus power supply 160 mA, up to 64 DALI control gears, 63 control devices, color code CC20, suitable
-
(Out of stock)
Price on request
Siemens CM AS-I MASTER ST ET 200SP (AS-I V3.0); 3RK7137-6SA00-0BC1
SIMATIC ET 200SP communication module CM AS-Interface Master ST according to AS-i specification V3.0
-
(Out of stock)
Price on request
Siemens Communication processor CP 1543SP-1; 6GK7543-6WX00-0XE0
Communications processor CP 1543SP-1 for connection of an SIMATIC S7-ET 200SP to Industrial Ethernet; Security (firewall and VPN) Open IE communication (TCP/IP,
-
(Out of stock)
Price on request
Siemens Communication processor CP 1542SP-1 IRC; 6GK7542-6VX00-0XE0
Communications Processor CP 1542SP-1 IRC for connection of an SIMATIC S7-ET 200SP to Industrial Ethernet, SINAUT ST7, TeleControl Server Basic, IEC 60870-5-104 or
-
(Out of stock)
Price on request
Siemens ET 200SP, CM PTP, PU 1; 6ES7137-6AA01-0BA0
SIMATIC ET 200SP, CM PTP communication module for serial connection RS-422, RS-485 and RS-232, freeport, 3964 (R), USS, MODBUS RTU master, slave, max. 250 Kbit/s,
-
(Out of stock)
Price on request
Siemens ET 200SP, CM 4 X IO-Link ST; 6ES7137-6BD00-0BA0
SIMATIC ET 200SP, CM 4xIO-Link ST Communication module IO-Link Master V1.1
-
(Out of stock)
Price on request