Siemens ET 200SP, D-O-L starter F 0.1-0.4A HF; 3RK1308-0CA00-0CP0
Fail-safe direct-on-line starter High Feature; Electronic switching; Electronic overload protection up to 0.09 kW / 400 V; Adjustment range 0.1 .. 0.4 A; PROFIenergy;...
Price on request
| Fail-safe direct-on-line starter High Feature; Electronic switching; Electronic overload protection up to 0.09 kW / 400 V; Adjustment range 0.1 .. 0.4 A; PROFIenergy; Option: 3DI/LC module |
| product brand name | SIMATIC |
| product category | Motor starter |
| product designation | Direct-on-line starter |
| product type designation | ET 200SP |
| General technical data | |
| trip class | CLASS OFF / 5 / 10 adjustable |
| equipment variant according to IEC 60947-4-2 | 3 |
| product function | Fail-safe direct-on-line starter |
| ● on-site operation | Yes |
| ● intrinsic device protection | Yes |
| ● remote firmware update | Yes |
| ● for power supply reverse polarity protection | Yes |
| insulation voltage rated value | 500 V |
| degree of pollution | 2 |
| overvoltage category | III |
| surge voltage resistance rated value | 6 kV |
| maximum permissible voltage for safe isolation | |
| ● between main and auxiliary circuit | 500 V |
| shock resistance | 6g / 11 ms |
| vibration resistance | 15 mm to 6 Hz; 2g to 500 Hz |
| operating frequency maximum | 1 1/s |
| mechanical service life (switching cycles) of the main contacts typical | 30 000 000 |
| type of assignment | 1 |
| reference code according to IEC 81346-2 | Q |
| Substance Prohibitance (Date) | 04/15/2016 |
| product function | |
| ● direct start | Yes |
| ● reverse starting | No |
| product component motor brake output | No |
| product function short circuit protection | Yes |
| design of short-circuit protection | fuse |
| breaking capacity maximum short-circuit current (Icu) | |
| ● at 400 V rated value | 55 kA |
| ● at 500 V rated value | 55 kA |
| ● at 500 V according to UL 60947 rated value | 100 kA |
| breaking capacity maximum short-circuit current (Icu) in the IT network | |
| ● at 400 V rated value | 55 kA |
| ● at 500 V rated value | 55 kA |
| Electromagnetic compatibility | |
| EMC emitted interference according to IEC 60947-1 | class A |
| EMC immunity according to IEC 60947-1 | Class A |
| conducted interference | |
| ● due to burst according to IEC 61000-4-4 | 3 kV |
| ● due to conductor-earth surge according to IEC 61000-4-5 | 4 kV |
| ● due to conductor-conductor surge according to IEC 61000-4-5 | 2 kV |
| ● due to high-frequency radiation according to IEC 61000-4-6 | Class A |
| field-based interference according to IEC 61000-4-3 | 20 V/m |
| electrostatic discharge according to IEC 61000-4-2 | 8 kV air discharge |
| conducted HF interference emissions according to CISPR11 | Class A for industrial environment |
| field-bound HF interference emission according to CISPR11 | Class A for industrial environment |
| Safety related data | |
| safety device type according to IEC 61508-2 | Type B |
| B10d value | 10 100 000 |
| Safety Integrity Level (SIL) according to IEC 61508 | 3 |
| performance level (PL) according to EN ISO 13849-1 | e |
| category according to EN ISO 13849-1 | 4 |
| stop category according to EN 60204-1 | 0 |
| diagnostics test interval by internal test function maximum | 600 s |
| PFH according to IEC 61508 relating to SIL | 0.0000000036 1/h |
| PFDavg with low demand rate according to IEC 61508 | 0.00000041 |
| hardware fault tolerance according to IEC 61508 | 1 |
| safe state | Load circuit open |
| protection class IP on the front according to IEC 60529 | IP20 |
Similar products:
Siemens ET 200SP, reversing starter 0.3 - 1A HF; 3RK1308-0BB00-0CP0
Reversing starter High Feature; Electronic switching; Electronic overload protection up to 0.25 kW / 400 V; Adjustment range 0.3 .. 1 A; PROFIenergy; Option: 3DI/LC
-
(Out of stock)
Price on request
Siemens ET 200SP, reversing starter 0.9 - 3A HF; 3RK1308-0BC00-0CP0
Reversing starter High Feature; Electronic switching; Electronic overload protection up to 1.1 kW / 400 V; Adjustment range 0.9 .. 3 A; PROFIenergy; Option: 3DI/LC
-
(Out of stock)
Price on request
Siemens ET 200SP, reversing starter 2.8 - 9 A HF; 3RK1308-0BD00-0CP0
Reversing starter High Feature; Electronic switching; Electronic overload protection up to 4 kW / 400 V; Adjustment range 2.8 .. 9 A; PROFIenergy; Option: 3DI/LC
-
(Out of stock)
Price on request
Siemens ET 200SP, reversing starter 4.0 - 12A HF; 3RK1308-0BE00-0CP0
Reversing starter High Feature; Incl. fan (3RW4928-8VB00); Electronic switching; Electronic overload protection up to 5.5 kW / 400 V; Adjustment range 4.0 .. 12
-
(Out of stock)
Price on request
Siemens ET 200SP, reversing starterF 0.1-0.4A HF; 3RK1308-0DA00-0CP0
Failsafe reversing starter High Feature; Electronic switching; Electronic overload protection up to 0.09 kW / 400 V; Adjustment range 0.1 .. 0.4 A; PROFIenergy;
-
(Out of stock)
Price on request
Siemens ET 200SP, reversing starter F 0.3-1A HF; 3RK1308-0DB00-0CP0
Failsafe reversing starter High Feature; Electronic switching; Electronic overload protection up to 0.25 kW / 400 V; Adjustment range 0.3 .. 1 A; PROFIenergy; Option:
-
(Out of stock)
Price on request