Name: Siemens ET 200SP, DI 16x 24V DC ST, PU 1; 6ES7131-6BH01-0BA0
Brand: Siemens
SKU: 6ES7131-6BH01-0BA0
Price: 12821.17 RSD
Availability: OutOfStock

Siemens ET 200SP, DI 16x 24V DC ST, PU 1; 6ES7131-6BH01-0BA0

SIMATIC ET 200SP, Digital input module, DI 16x 24V DC Standard, type 3 (IEC 61131), sink input, (PNP, P-reading), Packing unit: 1 Piece, fits to BU-type A0, Colour...

Brand: Siemens
Product Code: 6ES7131-6BH01-0BA0
Availability: Check availability

VAT-exclusive price: 10.684,31

VAT-inclusive price: 12.821,17

Qnt:

Description
Specification

SIMATIC ET 200SP, Digital input module, DI 16x 24V DC Standard, type 3 (IEC 61131), sink input, (PNP, P-reading), Packing unit: 1 Piece, fits to BU-type A0, Colour Code CC00, input delay time 0,05..20ms, diagnostics wire break, diagnostics supply voltage

General information
Product type designation		DI 16x24VDC ST
HW functional status		From FS02
Firmware version		V0.0
● FW update possible		No
usable BaseUnits		BU type A0
Color code for module-specific color identification plate		CC00
Product function
● I&M data		Yes; I&M0 to I&M3
● Isochronous mode		No
Engineering with
● STEP 7 TIA Portal configurable/integrated from version		V14
● STEP 7 configurable/integrated from version		V5.5 SP3
● PCS 7 configurable/integrated from version		V8.1 SP1
● PROFIBUS from GSD version/GSD revision		One GSD file each, Revision 3 and 5 and higher
● PROFINET from GSD version/GSD revision		GSDML V2.3
Operating mode
● DI		Yes
● Counter		No
● Oversampling		No
● MSI		No
Supply voltage
Rated value (DC)		24 V
permissible range, lower limit (DC)		19.2 V
permissible range, upper limit (DC)		28.8 V
Reverse polarity protection		Yes
Input current
Current consumption, max.		90 mA
Encoder supply
24 V encoder supply
● 24 V		No
Power loss
Power loss, typ.		1.7 W
Address area
Address space per module
● Inputs		2 byte; + 2 bytes for QI information
Hardware configuration
Automatic encoding		Yes
● Mechanical coding element		Yes
● Type of mechanical coding element		Type A
Selection of BaseUnit for connection variants
● 1-wire connection		BU type A0
● 2-wire connection		BU type A0 + Potential distributor module
● 3-wire connection		BU type A0 + Potential distributor module
● 4-wire connection		BU type A0 + Potential distributor module
Digital inputs
Number of digital inputs		16
Digital inputs, parameterizable		Yes
Source/sink input		P-reading
Input characteristic curve in accordance with IEC 61131, type 3		Yes
Input voltage
● Rated value (DC)		24 V
● for signal "0"		-30 to +5 V
● for signal "1"		+11 to +30V
Input current
● for signal "1", typ.		2.5 mA
Input delay (for rated value of input voltage)
for standard inputs
— parameterizable		Yes; 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms (in each case + delay of 30 to 500 µs, depending on line length)
— at "0" to "1", min.		0.05 ms
— at "0" to "1", max.		20 ms
— at "1" to "0", min.		0.05 ms
— at "1" to "0", max.		20 ms
Cable length
● shielded, max.		1 000 m
● unshielded, max.		600 m
Encoder
Connectable encoders
● 2-wire sensor		Yes
— permissible quiescent current (2-wire sensor), max.		1.5 mA
Interrupts/diagnostics/status information
Diagnostics function		Yes
Alarms
● Diagnostic alarm		Yes
Diagnoses
● Diagnostic information readable		Yes
● Monitoring the supply voltage		Yes
— parameterizable		Yes
● Monitoring of encoder power supply		No
● Wire-break		Yes; Module-by-module, optional protective circuit for preventing wire-break diagnostics in the case of simple encoder contacts: 25 kOhm to 45 kOhm
● Short-circuit		No
● Group error		Yes
Diagnostics indication LED
● Monitoring of the supply voltage (PWR-LED)		Yes; green PWR LED
● Channel status display		Yes; green LED
● for channel diagnostics		No
● for module diagnostics		Yes; green/red DIAG LED
Potential separation
Potential separation channels
● between the channels		No
● between the channels and backplane bus		Yes
● between the channels and the power supply of the electronics		No
Isolation
Isolation tested with		707 V DC (type test)
Standards, approvals, certificates
Suitable for safety functions		No
Ambient conditions
Ambient temperature during operation
● horizontal installation, min.		-30 °C; < 0 °C as of FS02
● horizontal installation, max.		60 °C
● vertical installation, min.		-30 °C; < 0 °C as of FS02
● vertical installation, max.		50 °C
Altitude during operation relating to sea level
● Installation altitude above sea level, max.		5 000 m; Restrictions for installation altitudes > 2 000 m, see manual
Dimensions
Width		15 mm
Height		73 mm
Depth		58 mm
Weights
Weight, approx.		28 g
last modified:		9/24/2021