Name: Siemens ET 200SP, DI 8x24VDC High Speed; 6ES7131-6BF00-0DA0
Brand: Siemens
SKU: 6ES7131-6BF00-0DA0
Availability: OutOfStock

0 Compare products

0 View cart

011 257 1922

Siemens ET 200SP, DI 8x24VDC High Speed; 6ES7131-6BF00-0DA0

SIMATIC ET 200SP, digital input module, DI 8x 24 V DC High Speed, Pack quantity: 1 unit, three alternative operating modes: DI, Oversampling, 4x counters, suitable...

Brand: Siemens
Product Code: 6ES7131-6BF00-0DA0
Availability: Check availability

Price on request

Description
Specification

SIMATIC ET 200SP, digital input module, DI 8x 24 V DC High Speed, Pack quantity: 1 unit, three alternative operating modes: DI, Oversampling, 4x counters, suitable for BU type A0, Color code CC01

General information
Product type designation		DI 8x24 V DC HS
HW functional status		from FS04
Firmware version		V1.0.2
● FW update possible		Yes
usable BaseUnits		BU type A0
Color code for module-specific color identification plate		CC01
Product function
● I&M data		Yes; I&M0 to I&M3
● Isochronous mode		Yes
Engineering with
● STEP 7 TIA Portal configurable/integrated from version		V13 SP1
● STEP 7 configurable/integrated from version		V5.5 SP3 / -
● PROFIBUS from GSD version/GSD revision		One GSD file each, Revision 3 and 5 and higher
● PROFINET from GSD version/GSD revision		GSDML V2.3
Operating mode
● DI		Yes
● Counter		Yes
● Oversampling		Yes
● MSI		No
Supply voltage
Rated value (DC)		24 V
permissible range, lower limit (DC)		19.2 V
permissible range, upper limit (DC)		28.8 V
Reverse polarity protection		Yes
Input current
Current consumption, max.		70 mA; without sensor supply
Encoder supply
24 V encoder supply
● 24 V		Yes
● Short-circuit protection		Yes; per module, electronic
● Output current, max.		700 mA
Power loss
Power loss, typ.		1.5 W
Address area
Address space per module
● Address space per module, max.		45 byte
● Inputs		32 byte; 1 byte + 1 byte for QI information in DI mode; 32 bytes in Oversampling mode; 25 bytes in Counter mode
● Outputs		20 byte; In count mode
Hardware configuration
Automatic encoding		Yes
● Mechanical coding element		Yes
● Type of mechanical coding element		Type A
Selection of BaseUnit for connection variants
● 1-wire connection		BU type A0
● 2-wire connection		BU type A0
● 3-wire connection		BU type A0 with AUX terminals
● 4-wire connection		BU type A0 + external terminals
Digital inputs
Number of digital inputs		8
Source/sink input		P-reading
Pulse extension		Yes
● Length		2 s; 50 ms, 100 ms, 200 ms, 500 ms, 1 s, 2 s
Digital input functions, parameterizable
● Gate start/stop		Yes
● Freely usable digital input		Yes
● Counter		Yes
— Number, max.		4
— Counting frequency, max.		10 kHz
— Counting width		32 bit
— Counting direction up/down		Yes
● Digital input with oversampling		Yes
— Number, max.		8
— Values per cycle, max.		32
— Resolution, min.		7.8125 µs
Input voltage
● Rated value (DC)		24 V
● for signal "0"		-30 to +5 V
● for signal "1"		+11 to +30V
Input current
● for signal "1", typ.		6 mA
Input delay (for rated value of input voltage)
for standard inputs