Name: Siemens ET 200SP, DQ 4x24..230VAC/2A ST; 6ES7132-6FD00-0BB1
Brand: Siemens
SKU: 6ES7132-6FD00-0BB1
Availability: OutOfStock

Siemens ET 200SP, DQ 4x24..230VAC/2A ST; 6ES7132-6FD00-0BB1

SIMATIC ET 200SP, digital output module, DQ 4x 24..230V AC/2A Standard suitable for BU type B1, Color code CC41, Module diagnostics...

Brand: Siemens
Product Code: 6ES7132-6FD00-0BB1
Availability: Check availability

Price on request

Description
Specification

SIMATIC ET 200SP, digital output module, DQ 4x 24..230V AC/2A Standard suitable for BU type B1, Color code CC41, Module diagnostics

General information
Product type designation	DQ 4x24 ... 230 V AC/2 A ST
HW functional status	From FS05
Firmware version	V1.0
● FW update possible	Yes
usable BaseUnits	BU type B1
Color code for module-specific color identification plate	CC41
Product function
● I&M data	Yes; I&M0 to I&M3
● Isochronous mode	No
Engineering with
● STEP 7 TIA Portal configurable/integrated from version	V13 / V13
● STEP 7 configurable/integrated from version	V5.5 SP3 / -
● PROFIBUS from GSD version/GSD revision	GSD Revision 5
● PROFINET from GSD version/GSD revision	GSDML V2.3
Operating mode
● DQ	Yes
● DQ with energy-saving function	No
● PWM	No
● Oversampling	No
● MSO	No
Supply voltage
Rated value (AC)	230 V
permissible range, lower limit (AC)	20.4 V
permissible range, upper limit (AC)	264 V
Input current
Current consumption (rated value)	11.5 mA
output voltage / header
Rated value (AC)	230 V; 24V AC to 230V AC
Power loss
Power loss, typ.	9 W; Active power, load voltage 230 V, all outputs loaded with 2 A, 50 Hz
Address area
Address space per module
● Address space per module, max.	1 byte; + 1 byte for QI information
● Inputs	1 byte; With QI
● Outputs	1 byte
Hardware configuration
Automatic encoding
● Type of mechanical coding element	type C
Digital outputs
Type of digital output	Triac with zero point detection
Number of digital outputs	4
Current-sinking	No
Current-sourcing	Yes
Digital outputs, parameterizable	No
Short-circuit protection	No; When using BU type B1, a miniature, quick-response fuse with 10 A tripping current must be provided
Controlling a digital input	Yes
Size of motor starters according to NEMA, max.	5
Switching capacity of the outputs
● with resistive load, max.	2 A
● on lamp load, max.	100 W
Output voltage
● for signal "1", min.	20.4 V
Output current
● for signal "1" rated value	2 A
● for signal "1" permissible range, min.	10 mA
● for signal "1" permissible range, max.	2 A
● for signal "0" residual current, max.	460 µA
Output delay with resistive load
● "0" to "1", max.	10 ms
● "1" to "0", max.	10 ms
Parallel switching of two outputs
● for logic links	No
● for uprating	No
● for redundant control of a load	Yes
Switching frequency
● with resistive load, max.	10 Hz
● with inductive load, max.	0.5 Hz; Higher frequencies are possible, see Equipment Manual / Product Information
● on lamp load, max.	1 Hz
Total current of the outputs
● Current per channel, max.	2 A
● Current per module, max.	8 A
Total current of the outputs (per module)
horizontal installation
— up to 40 °C, max.	8 A
— up to 50 °C, max.	6 A
— up to 60 °C, max.	4 A
vertical installation
— up to 30 °C, max.	8 A
— up to 40 °C, max.	6 A
— up to 50 °C, max.	4 A
Cable length
● shielded, max.	1 000 m
● unshielded, max.	600 m
Interrupts/diagnostics/status information
Diagnostics function	No
Substitute values connectable	Yes
Alarms
● Diagnostic alarm	No
Diagnoses
● Monitoring the supply voltage	No
● Wire-break	No
● Short-circuit	No
● Group error	Yes
Diagnostics indication LED
● Monitoring of the supply voltage (PWR-LED)	Yes; green PWR LED
● Channel status display	Yes; green LED
● for channel diagnostics	No
● for module diagnostics	Yes; green/red DIAG LED
Potential separation
Potential separation channels
● between the channels	No
● between the channels and backplane bus	Yes
● between the channels and the power supply of the electronics	No
Isolation
Isolation tested with	2 545 V DC/2 s (routine test)
Standards, approvals, certificates
Suitable for safety functions	No
Ambient conditions
Ambient temperature during operation
● horizontal installation, min.	-30 °C
● horizontal installation, max.	60 °C
● vertical installation, min.	-30 °C
● vertical installation, max.	60 °C
Altitude during operation relating to sea level
● Installation altitude above sea level, max.	2 000 m; On request: Installation altitudes greater than 2 000 m
Dimensions
Width	20 mm
Height	73 mm
Depth	58 mm
Weights
Weight, approx.	50 g
last modified:	12/28/2021