General information
Product type designation
DQ 8x24VDC/0,5A SNK BA
HW functional status
From FS02
Firmware version
V0.0
● FW update possible
No
usable BaseUnits
BU type A0
Color code for module-specific color identification plate
CC01
Product function
● I&M data
Yes; I&M0 to I&M3
● Isochronous mode
No
Engineering with
● STEP 7 TIA Portal configurable/integrated from version
V14
● STEP 7 configurable/integrated from version
V5.5 SP3
● PROFIBUS from GSD version/GSD revision
One GSD file each, Revision 3 and 5 and higher
● PROFINET from GSD version/GSD revision
GSDML V2.3
Operating mode
● DQ
Yes
● DQ with energy-saving function
No
● PWM
No
● Oversampling
No
● MSO
No
Redundancy
● Redundancy capability
Yes
Supply voltage
Rated value (DC)
24 V
permissible range, lower limit (DC)
19.2 V
permissible range, upper limit (DC)
28.8 V
output voltage / header
Rated value (DC)
24 V
Power loss
Power loss, typ.
1.5 W
Address area
Address space per module
● Outputs
1 byte
Hardware configuration
Automatic encoding
Yes
● Mechanical coding element
Yes
● Type of mechanical coding element
type B
Digital outputs
Type of digital output
Source output (PNP, current-sourcing)
Number of digital outputs
8
Current-sinking
Yes
Digital outputs, parameterizable
Yes
Short-circuit protection
Yes
● Response threshold, typ.
1.5 A
Limitation of inductive shutdown voltage to
Typ. 47 V
Controlling a digital input
Yes
Switching capacity of the outputs
● with resistive load, max.
0.5 A
● on lamp load, max.
5 W
Load resistance range
● lower limit
48 Ω
● upper limit
3 400 Ω
Output current
● for signal "1" rated value
0.5 A
● for signal "1" permissible range, max.
0.5 A
● for signal "0" residual current, max.
5 µA
Output delay with resistive load
● "0" to "1", max.
300 µs
● "1" to "0", max.
600 µs
Parallel switching of two outputs
● for uprating
No
● for redundant control of a load
Yes
Switching frequency
● with resistive load, max.
100 Hz
● with inductive load, max.
0.5 Hz
● on lamp load, max.
10 Hz
Total current of the outputs
● Current per channel, max.
0.5 A
● Current per module, max.
4 A
Total current of the outputs (per module)
horizontal installation
— up to 60 °C, max.
4 A
vertical installation
— up to 50 °C, max.
4 A
Similar products:
SIMATIC ET 200SP HA, ET 200SP, digital ex-i output module, Ex-DQ 2x17,4VDC/27mA suitable for BaseUnit type X1, channel diagnostics
-
(Out of stock)
Price on request
SIMATIC ET 200SP, Digital output module, DQ 8x 24V DC/0,5A Basic, Source output (PNP,P-switching) Packing unit: 1 piece, fits to BU-type A0, Colour Code CC02, substitute
-
(Out of stock)
Price on request
SIMATIC ET 200SP, digital output module, DQ 4x 24VDC/2A Standard, suitable for BU type A0, Color code CC02, Module diagnostics
-
(Out of stock)
Price on request
SIMATIC ET 200SP, relay module, RQ COni 3x120VDC..230VAC/5A ST, 3 CO contacts non-isolated contacts, packing unit: 1 unit, suitable for BU type U0, color code CC20,
-
(Out of stock)
Price on request
SIMATIC DP, Electronics module f. ET200SP, F-RQ 1x 24 V DC/24..230VAC/5A ST, 20 mm overall width, 1 relay output (2 NO) Summation output current 5 A, load voltage
-
(Out of stock)
Price on request
SIMATIC ET 200SP, digital output module DQ 4x 24..230V AC/2A HF packaging unit: 1 piece, two alternative modes: DQ and power control, fits to BU-Type U0, color code
-
(Out of stock)
Price on request
Compare products
Remove all products
