Name: Siemens ET 200SP HA, EX-DI 4xNAMUR; 6DL1131-6TD00-0HX1
Brand: Siemens
SKU: 6DL1131-6TD00-0HX1
Availability: OutOfStock

Siemens ET 200SP HA, EX-DI 4xNAMUR; 6DL1131-6TD00-0HX1

SIMATIC ET 200SP HA, ET 200SP, digital ex-i input module, DI 4xNAMUR, suitable for BaseUnit type X1, channel diagnostics...

Brand: Siemens
Product Code: 6DL1131-6TD00-0HX1
Availability: Check availability

Price on request

Description
Specification

SIMATIC ET 200SP HA, ET 200SP, digital ex-i input module, DI 4xNAMUR, suitable for BaseUnit type X1, channel diagnostics

General information
Product type designation	Ex-DI 4xNAMUR
Firmware version	V1.0
● FW update possible	Yes
usable BaseUnits	BU type X1
Product function
● I&M data	Yes; I&M0 to I&M3
● Isochronous mode	No
Engineering with
● STEP 7 TIA Portal configurable/integrated from version	STEP 7 V16 or higher with HSP
● STEP 7 configurable/integrated from version	STEP 7 V5.6 SP2 or higher
● PCS 7 configurable/integrated from version	V9.1
Operating mode
● DI	Yes
● Counter	Yes
● MSI	Yes
Redundancy
● Redundancy capability	No
Input current
Current consumption (rated value)	50 mA
Current consumption, max.	55 mA
Encoder supply
Number of outputs	4
Output voltage (DC)	8.2 V
Short-circuit protection	Yes
Power loss
Power loss, typ.	1.2 W
Address area
Address space per module
● Inputs	10 byte; + 1 byte for QI information
● Outputs	10 byte
Hardware configuration
Automatic encoding
● Mechanical coding element	Yes
Selection of BaseUnit for connection variants
● 2-wire connection	BU type X1
Digital inputs
Number of digital inputs	4; NAMUR
Digital inputs, parameterizable	Yes
Pulse extension	Yes; 0.5 s, 1 s, 2 s
Time stamping	No
Edge evaluation	Yes; Positive edge, negative edge
Signal change flutter	Yes; 2 to 32 signal changes
Flutter observation window	Yes; 0.5 s, 1 s to 100 s in 1-s steps
Digital input functions, parameterizable
● Counter
— Number, max.	2; Channel 0 and 1
— Counting frequency, max.	5 kHz
— Counting direction up/down	Yes; Up
Input voltage
● Rated value (DC)	8.2 V
Input current
for 10 k switched contact
— for signal "0"	Max. 1.2 mA
— for signal "1"	Min. 2.1 mA
for unswitched contact
— for signal "0", max. (permissible quiescent current)	0.5 mA
— for signal "1"	typ. 8 mA
for NAMUR encoders
— for signal "0", min.	0.35 mA
— for signal "0", max.	1.2 mA
— for signal "1", min.	2.1 mA
— for signal "1", max.	6.4 mA
Input delay (for rated value of input voltage)
for NAMUR inputs
— at "0" to "1", max.	12 ms
— at "1" to "0", max.	12 ms
Cable length
● shielded, max.	500 m; Ex characteristic values must be observed; without shield applied on both sides and cable lengths of more than 200 m, measured value distortions can occur when using the inputs as counter/ frequency meter
● unshielded, max.	300 m; Ex characteristic values must be observed; without shield applied on both sides and cable lengths of more than 200 m, measured value distortions can occur when using the inputs as counter/ frequency meter
Encoder
Connectable encoders
● NAMUR encoder/changeover contact according to EN 60947	Yes
● Single contact / changeover contact unconnected	Yes
● Single contact / changeover contact connected with 10 kΩ	Yes