Siemens ET 200SP, RQ COni 3x120VDC.230VAC/5A ST; 6ES7132-6HC70-0BU0
Siemens ET 200SP, RQ COni 3x120VDC.230VAC/5A ST; 6ES7132-6HC70-0BU0
SIMATIC ET 200SP, relay module, RQ COni 3x120VDC..230VAC/5A ST, 3 CO contacts non-isolated contacts, packing unit: 1 unit, suitable for BU type U0, color code CC20,...
SIMATIC ET 200SP, relay module, RQ COni 3x120VDC..230VAC/5A ST, 3 CO contacts non-isolated contacts, packing unit: 1 unit, suitable for BU type U0, color code CC20, substitute value output, module diagnostics for supply voltage
General information
Product type designation
RQ 3x120VDC-230VAC/5A CO n.i. ST
Firmware version
V0.0
● FW update possible
No
usable BaseUnits
BU type U0
Color code for module-specific color identification plate
CC20
Product function
● I&M data
Yes; I&M0 to I&M3
● Isochronous mode
No
Redundancy
● Redundancy capability
Yes
Supply voltage
Rated value (DC)
24 V
permissible range, lower limit (DC)
19.2 V
permissible range, upper limit (DC)
28.8 V
Reverse polarity protection
Yes
Input current
Current consumption (rated value)
55 mA; without load
output voltage / header
Rated value (AC)
230 V
Power loss
Power loss, typ.
1.4 W
Address area
Address space per module
● Inputs
+ 1 byte for QI information
● Outputs
1 byte
Hardware configuration
Automatic encoding
Yes
● Mechanical coding element
Yes
● Type of mechanical coding element
type C
Selection of BaseUnit for connection variants
● 2-wire connection
BU type U0
● 3-wire connection
BU type U0
Digital outputs
Type of digital output
Relays
Number of digital outputs
3
Current-sinking
Yes
Current-sourcing
Yes
Digital outputs, parameterizable
Yes
Short-circuit protection
No
Switching capacity of the outputs
● with resistive load, max.
5 A; see additional description in the manual
● with inductive load, max.
2 A; see additional description in the manual
Parallel switching of two outputs
● for logic links
Yes
● for uprating
No
● for redundant control of a load
Yes
Switching frequency
● with resistive load, max.
2 Hz
● with inductive load, max.
0.5 Hz
● on lamp load, max.
2 Hz
Total current of the outputs
● Current per channel, max.
5 A
● Current per module, max.
5 A
Total current of the outputs (per module)
horizontal installation
— up to 50 °C, max.
5 A
— up to 60 °C, max.
5 A
vertical installation
— up to 40 °C, max.
5 A
— up to 50 °C, max.
5 A
Relay outputs
● Number of relay outputs
3; Changeover contact, non-floating
● Rated supply voltage of relay coil L+ (DC)
24 V
● Current consumption of relays (coil current of all relays), max.
40 mA
● external protection for relay outputs
yes, with miniature fuse max. 6.3 A tripping current, quick-response tripping characteristic and 1 500 A breaking capacity
● Number of operating cycles, max.
1 000 000; see additional description in the manual
SIMATIC ET 200SP, digital output module, DQ 8x 24VDC/0.5A High Feature, source output PNP, source output, Packing unit: 1 unit, suitable for BU type A0, color code
SIMATIC ET 200SP, Relay module, RQ NO 4x 120V DC..230VAC/5A ST. 4 normally open contacts, isolated contacts, packing unit: 1 piece, fits to BU-type B0 and B1, Colour
SIMATIC ET 200SP, relay module normally open, RQ NO-MA4x120VDC..230VAC/5A ST, with manual operation, packing unit VPE 1, suitable for BU type B0 or B1, Module d
