Siemens ET 200SP, TM Count 1x24V; 6ES7138-6AA01-0BA0
SIMATIC ET 200SP, TM count 1x 24 V Counter module, 1 channel for 24 V incremental encoder or pulse encoder, 3 DI, 2 DQ Suitable for BU type A0, packing quantity:...
Price on request
| SIMATIC ET 200SP, TM count 1x 24 V Counter module, 1 channel for 24 V incremental encoder or pulse encoder, 3 DI, 2 DQ Suitable for BU type A0, packing quantity: 1 unit, |
| General information | |
| Product type designation | TM Count 1x24V |
| Firmware version | V2.0 |
| ● FW update possible | Yes |
| usable BaseUnits | BU type A0 |
| Color code for module-specific color identification plate | CC00 |
| Product function | |
| ● I&M data | Yes; I&M0 to I&M3 |
| ● Isochronous mode | Yes |
| Engineering with | |
| ● STEP 7 TIA Portal configurable/integrated from version | STEP 7 V15 SP1 or higher |
| ● STEP 7 configurable/integrated from version | V5.6 and higher |
| ● PROFIBUS from GSD version/GSD revision | One GSD file each, Revision 3 and 5 and higher |
| ● PROFINET from GSD version/GSD revision | GSDML V2.34 |
| Supply voltage | |
| Load voltage L+ | |
| ● Rated value (DC) | 24 V |
| ● permissible range, lower limit (DC) | 19.2 V |
| ● permissible range, upper limit (DC) | 28.8 V |
| ● Reverse polarity protection | Yes |
| Input current | |
| Current consumption, max. | 60 mA; without load |
| Encoder supply | |
| Number of outputs | 1 |
| 24 V encoder supply | |
| ● 24 V | Yes; L+ (-0.8 V) |
| ● Short-circuit protection | Yes; electronic/thermal |
| ● Output current, max. | 300 mA |
| Power loss | |
| Power loss, typ. | 1 W |
| Address area | |
| Address space per module | |
| ● Inputs | 16 byte; 4 bytes in Fast mode |
| ● Outputs | 12 byte; 4 bytes for Motion Control, 0 bytes for Fast mode |
| Hardware configuration | |
| Automatic encoding | Yes |
| ● Mechanical coding element | Yes |
| ● Type of mechanical coding element | type B |
| Digital inputs | |
| Number of digital inputs | 3 |
| Digital inputs, parameterizable | Yes |
| Input characteristic curve in accordance with IEC 61131, type 3 | Yes |
| Digital input functions, parameterizable | |
| ● Gate start/stop | Yes |
| ● Capture | Yes |
| ● Synchronization | Yes |
| ● Freely usable digital input | Yes |
| ● Probe | Yes |
| Input voltage | |
| ● Rated value (DC) | 24 V |
| ● for signal "0" | -5 ... +5 V |
| ● for signal "1" | +11 to +30V |
| ● permissible voltage at input, min. | -30 V; -5 V continuous, -30 V brief reverse polarity protection |
| ● permissible voltage at input, max. | 30 V |
| Input current | |
| ● for signal "1", typ. | 2.5 mA |
| Input delay (for rated value of input voltage) | |
| for standard inputs | |
| — parameterizable | Yes; none / 0.05 / 0.1 / 0.4 / 0.8 / 1.6 / 3.2 / 12.8 / 20 ms |
| — at "0" to "1", min. | 6 µs; for parameterization "none" |
| — at "1" to "0", min. | 6 µs; for parameterization "none" |
| for technological functions | |
| — parameterizable | Yes |
| Cable length | |
| ● shielded, max. | 1 000 m |
| ● unshielded, max. | 600 m |
| Digital outputs | |
| Type of digital output | Transistor |
| Number of digital outputs | 2 |
| Digital outputs, parameterizable | Yes |
| Short-circuit protection | Yes; electronic/thermal |
| ● Response threshold, typ. | 1 A |
| Limitation of inductive shutdown voltage to | L+ (-53 V) |
| Controlling a digital input | |
Similar products:
Siemens F-TM Count 1x1Vpp sin/cos HF; 6ES7136-6CB00-0CA0
SIMATIC ET 200SP, F-TM Count 1x1Vpp sin/cos HF, PROFIsafe, 1 channel, for incremental rotary encoders, sin/cos 1 Vpp, suitable for BU type A0, pack quantity: 1
-
(Out of stock)
Price on request
Siemens ET 200SP, TM Posinput 1; 6ES7138-6BA01-0BA0
SIMATIC ET 200SP, TM Posinput 1 counter and position decoder module for RS-422 incremental encoder or SSI absolute encoder, 2 DI, 2 DQ suitable for BU type A0, pack
-
(Out of stock)
Price on request
Siemens F-TM StepDrive ST; 6BK1136-6SB00-0BU0
SIMATIC F-TM StepDrive ST, drive controller for stepper motors in the safety extra low voltage range, 24 to 48 V DC power supply of the drive, output current 5 A,
-
(Out of stock)
Price on request
Siemens F-TM ServoDrive HF; 6BK1136-6AB00-0CU0
SIMATIC F-TM ServoDrive HF, drive controller for servo and stepper motors in safety low-voltage area, 24 to 48 V DC power supply of the drive, rated current 5A,
-
(Out of stock)
Price on request
Siemens SITRANS FCT070 Coriolis flow transmitter; 7ME4138-6AA00-0BB1
SITRANS FCT070 Coriolis flow transmitter for use as technology module together with SIMATIC ET 200SP (IM155-6PN HF). Via faceplates suitable for operation in SIMATIC
-
(Out of stock)
Price on request
Siemens Technology module SITRANS FST070; 7ME3448-6AA00-0BB1
The technology module SITRANS FST070 is a ultrasonic flow transmitter for the SIMATIC ET 200SP. The TM FCT070 flow transmitter can be operated directly in the SIMATIC
-
(Out of stock)
Price on request