Siemens ET 200SP, TM Timer DIDQ 10x24V; 6ES7138-6CG00-0BA0
SIMATIC ET 200SP, TM timer DIDQ 10x 24V time-controlled digital inputs and outputs 4 DI, 6DQ with time stamp Count, PWM, oversampling...
Price on request
| SIMATIC ET 200SP, TM timer DIDQ 10x 24V time-controlled digital inputs and outputs 4 DI, 6DQ with time stamp Count, PWM, oversampling |
| General information | |
| Product type designation | TM Timer DIDQ 10x24V |
| HW functional status | From FS03 |
| usable BaseUnits | BU type A0 |
| Product function | |
| ● I&M data | Yes; I&M 0 |
| ● Isochronous mode | Yes |
| Engineering with | |
| ● STEP 7 TIA Portal configurable/integrated from version | V13 Update 3 |
| ● STEP 7 configurable/integrated from version | V5.5 SP3 / - |
| Supply voltage | |
| Load voltage L+ | |
| ● Rated value (DC) | 24 V |
| ● permissible range, lower limit (DC) | 19.2 V |
| ● permissible range, upper limit (DC) | 28.8 V |
| ● Reverse polarity protection | Yes; against destruction |
| Input current | |
| Current consumption, max. | 50 mA; without load |
| Encoder supply | |
| Number of outputs | 1 |
| 24 V encoder supply | |
| ● 24 V | Yes; L+ (-0.8 V) |
| ● Short-circuit protection | Yes |
| ● Output current, max. | 500 mA; Observe derating |
| Power loss | |
| Power loss, typ. | 1.5 W |
| Address area | |
| Address space per module | |
| ● Inputs | 26 byte |
| ● Outputs | 32 byte |
| Hardware configuration | |
| Automatic encoding | Yes |
| ● Mechanical coding element | Yes |
| ● Type of mechanical coding element | type B |
| Digital inputs | |
| Number of digital inputs | 4 |
| Digital inputs, parameterizable | Yes |
| Input characteristic curve in accordance with IEC 61131, type 3 | Yes |
| Digital input functions, parameterizable | |
| ● Digital input with time stamp | Yes |
| — Number, max. | 4 |
| ● Counter | Yes |
| — Number, max. | 3 |
| ● Counter for incremental encoder | Yes |
| — Number, max. | 1 |
| ● Digital input with oversampling | Yes |
| — Number, max. | 4 |
| ● HW enable for digital input | Yes |
| — Number, max. | 1 |
| ● HW enable for digital output | Yes |
| — Number, max. | 3 |
| Input voltage | |
| ● Type of input voltage | DC |
| ● Rated value (DC) | 24 V |
| ● for signal "0" | -5 ... +5 V |
| ● for signal "1" | +11 to +30V |
| ● permissible voltage at input, min. | -30 V; -5 V continuous, -30 V brief reverse polarity protection |
| ● permissible voltage at input, max. | 30 V |
| Input current | |
| ● for signal "1", typ. | 2.5 mA |
| Input delay (for rated value of input voltage) | |
| ● Minimum pulse width for program reactions | 3 µs for parameterization "none" |
| for standard inputs | |
| — parameterizable | Yes; none / 0.05 / 0.1 / 0.4 / 0.8 ms |
| — at "0" to "1", min. | 4 µs |
| — at "1" to "0", min. | 4 µs |
| Cable length | |
| ● shielded, max. | 1 000 m; Depending on sensor, cable quality and rate of change |
| ● unshielded, max. | 600 m; Depending on sensor, cable quality and rate of change |
| Digital outputs | |
| Type of digital output | Transistor |
| Number of digital outputs | 6 |
| Current-sinking | Yes; With High Speed output |
| Current-sourcing | |
Similar products:
Siemens F-TM Count 1x1Vpp sin/cos HF; 6ES7136-6CB00-0CA0
SIMATIC ET 200SP, F-TM Count 1x1Vpp sin/cos HF, PROFIsafe, 1 channel, for incremental rotary encoders, sin/cos 1 Vpp, suitable for BU type A0, pack quantity: 1
-
(Out of stock)
Price on request
Siemens ET 200SP, TM Posinput 1; 6ES7138-6BA01-0BA0
SIMATIC ET 200SP, TM Posinput 1 counter and position decoder module for RS-422 incremental encoder or SSI absolute encoder, 2 DI, 2 DQ suitable for BU type A0, pack
-
(Out of stock)
Price on request
Siemens F-TM StepDrive ST; 6BK1136-6SB00-0BU0
SIMATIC F-TM StepDrive ST, drive controller for stepper motors in the safety extra low voltage range, 24 to 48 V DC power supply of the drive, output current 5 A,
-
(Out of stock)
Price on request
Siemens F-TM ServoDrive HF; 6BK1136-6AB00-0CU0
SIMATIC F-TM ServoDrive HF, drive controller for servo and stepper motors in safety low-voltage area, 24 to 48 V DC power supply of the drive, rated current 5A,
-
(Out of stock)
Price on request
Siemens SITRANS FCT070 Coriolis flow transmitter; 7ME4138-6AA00-0BB1
SITRANS FCT070 Coriolis flow transmitter for use as technology module together with SIMATIC ET 200SP (IM155-6PN HF). Via faceplates suitable for operation in SIMATIC
-
(Out of stock)
Price on request
Siemens Technology module SITRANS FST070; 7ME3448-6AA00-0BB1
The technology module SITRANS FST070 is a ultrasonic flow transmitter for the SIMATIC ET 200SP. The TM FCT070 flow transmitter can be operated directly in the SIMATIC
-
(Out of stock)
Price on request