Siemens F-TM ServoDrive ST; 6BK1136-6AB00-0BU0
SIMATIC F-TM ServoDrive ST, drive controller for servo drives in the safety extra low voltage range, 24 to 48 V DC power supply of the drive, output current 5 A,...
Price on request
| SIMATIC F-TM ServoDrive ST, drive controller for servo drives in the safety extra low voltage range, 24 to 48 V DC power supply of the drive, output current 5 A, for SIMATIC ET 200SP, with brake chopper, STO hardwired |
| General information | |
| Product type designation | F-TM ServoDrive ST |
| HW functional status | V1.0 |
| Firmware version | V1.2 |
| ● FW update possible | Yes |
| Product description | Control of EC motors |
| usable BaseUnits | BU type U0 |
| Product function | |
| ● I&M data | Yes |
| ● Isochronous mode | No |
| ● Four-quadrant operation | Yes |
| ● Speed control with encoder | Yes |
| ● Speed control without encoder | No |
| ● Safety Functions | Yes; Drive controller with hardwired STO |
| Protection function | |
| ● Undervoltage protection | Yes |
| ● Overvoltage protection | Yes |
| ● Overload protection | Yes |
| ● Ground-fault protection | No |
| ● Short-circuit protection | Yes |
| Installation type/mounting | |
| Type of ventilation | Convection cooling |
| Supply voltage | |
| Design of the power supply | 24 ... 48 V DC, SELV / PELV |
| permissible range, lower limit (DC) | 16.8 V |
| permissible range, upper limit (DC) | 57.6 V |
| Input current | |
| Current consumption (rated value) | 6 A |
| Current consumption, max. | 10 A |
| Current consumption for the electronics, max. | 0.1 A |
| Inrush current, max. | 25 A; at 24 V |
| output voltage / header | |
| Rated value, min. | 24 V |
| Rated value, max. | 48 V |
| Output current | |
| Current output (rated value) | 5 A |
| Output current, max. | 10 A |
| Output frequency | 599 Hz |
| Encoder supply | |
| Number of outputs | 1 |
| Power | |
| DC power consumption | 300 W; At 50 V |
| Power loss | |
| Power loss, typ. | 3.5 W |
| Digital inputs | |
| Number of digital inputs | 1; input for message signal |
| Number of safety inputs | 1; For STO, antivalent (2-pin) - 24 V DC |
| Encoder | |
| Connectable encoders | |
| ● Incremental encoder (symmetrical) | Yes; up to 500 Hz per channel |
| Interrupts/diagnostics/status information | |
| Alarms | |
| ● Diagnostic alarm | Yes |
| ● Hardware interrupt | No |
| Diagnoses | |
| ● Monitoring the supply voltage | Yes |
| ● Wire-break | Yes |
| ● Short-circuit | Yes |
| ● Group error | Yes |
| Diagnostics indication LED | |
| ● RUN LED | Yes |
| ● ERROR LED | Yes |
| Integrated Functions | |
| Position detection | |
| ● Incremental acquisition | Yes |
| Potential separation | |
| Potential separation channels | |
| ● between the channels and backplane bus | Yes |
| Isolation | |
| Isolation tested with | 707 V DC, type test (between backplane bus, DC input and functional grounding) |
| Overvoltage category | 2 |
| Degree of pollution | 2 according to EN 61800-5-1 |
| Degree and class of protection | |
| IP degree of protection | IP20 |
| Standards, approvals, certificates | |
Similar products:
Siemens F-TM StepDrive ST; 6BK1136-6SB00-0BU0
SIMATIC F-TM StepDrive ST, drive controller for stepper motors in the safety extra low voltage range, 24 to 48 V DC power supply of the drive, output current 5 A,
-
(Out of stock)
Price on request
Siemens F-TM ServoDrive HF; 6BK1136-6AB00-0CU0
SIMATIC F-TM ServoDrive HF, drive controller for servo and stepper motors in safety low-voltage area, 24 to 48 V DC power supply of the drive, rated current 5A,
-
(Out of stock)
Price on request
Siemens SITRANS FCT070 Coriolis flow transmitter; 7ME4138-6AA00-0BB1
SITRANS FCT070 Coriolis flow transmitter for use as technology module together with SIMATIC ET 200SP (IM155-6PN HF). Via faceplates suitable for operation in SIMATIC
-
(Out of stock)
Price on request
Siemens Technology module SITRANS FST070; 7ME3448-6AA00-0BB1
The technology module SITRANS FST070 is a ultrasonic flow transmitter for the SIMATIC ET 200SP. The TM FCT070 flow transmitter can be operated directly in the SIMATIC
-
(Out of stock)
Price on request
Siemens SIMATIC ET 200SP TM ECC 2xPWM ST; 6FE1242-6TM10-0BB1
SIMATIC ET 200SP TM ECC 2xPWM ST Chargecontroller f. conductive charging of electric vehicles according IEC61851 mode 3 for 2 Charging points -30°C...60°C
-
(Out of stock)
Price on request
Siemens SIMATIC ET 200SP TM ECC PL ST; 6FE1242-6TM20-0BB1
SIMATIC ET 200SP TM ECC PL ST Chargecontroller for conductiv Charging of electric vehicles according DIN SPEC 70121 Charging Mode 4 TEMP:-30°C...60°C 1x
-
(Out of stock)
Price on request