Siemens S7-1500, DQ 8x230VAC/2A ST (Triac); 6ES7522-5FF00-0AB0

Siemens S7-1500, DQ 8x230VAC/2A ST (Triac); 6ES7522-5FF00-0AB0

SIMATIC S7-1500, digital output module DQ 8x230 V AC/2 A ST; TRIAC; 8 channels in groups of 1; 2 A per group; Substitute value: Front connector (screw terminals...

Brand: Siemens
Product Code: 6ES7522-5FF00-0AB0
Availability: Check availability
Price on request
SIMATIC S7-1500, digital output module DQ 8x230 V AC/2 A ST; TRIAC; 8 channels in groups of 1; 2 A per group; Substitute value: Front connector (screw terminals or push-in) to be ordered separately

General information
Product type designation DQ 8x230 V AC/2A ST (triac)
HW functional status From FS01
Firmware version V2.2.0
● FW update possible Yes
Product function
● I&M data Yes; I&M0 to I&M3
● Isochronous mode No
● Prioritized startup Yes
Engineering with
● STEP 7 TIA Portal configurable/integrated from version V12 / V12
● STEP 7 configurable/integrated from version V5.5 SP3 / -
● PROFIBUS from GSD version/GSD revision V1.0 / V5.1
● PROFINET from GSD version/GSD revision V2.3 / -
Operating mode
● DQ Yes
● DQ with energy-saving function No
● PWM No
● Oversampling No
● MSO Yes
● Integrated operating cycle counter Yes; FW V2.2.0 or higher
output voltage / header
Rated value (AC) 230 V; 120/230 V AC, 50/60 Hz
Power
Power available from the backplane bus 0.9 W
Power loss
Power loss, typ. 10.8 W
Digital outputs
Type of digital output Triac
Number of digital outputs 8
Current-sourcing Yes
Digital outputs, parameterizable Yes
Short-circuit protection No
● built-in fuse 6.3 A melting fuse, slow-blow
Size of motor starters according to NEMA, max. 5
Switching capacity of the outputs
● with resistive load, max. 2 A
● on lamp load, max. 50 W
Output voltage
● for signal "1", min. L1 (-1.5 V) at maximum output current; L1 (-8.5 V) at minimum output current
Output current
● for signal "1" rated value 2 A
● for signal "1" permissible range, min. 10 mA
● for signal "1" permissible range, max. 15 A; max. 1 AC cycle
● for signal "0" residual current, max. 2 mA
Output delay with resistive load
● "0" to "1", max. 1 AC cycle
● "1" to "0", max. 1 AC cycle
Parallel switching of two outputs
● for logic links No
● for uprating No
● for redundant control of a load Yes
Switching frequency
● with resistive load, max. 10 Hz
● with inductive load, max. 0.5 Hz
● on lamp load, max. 1 Hz
Total current of the outputs
● Current per channel, max. 2 A; see additional description in the manual
● Current per group, max. 2 A; see additional description in the manual
● Current per module, max. 10 A; see additional description in the manual
Cable length
● shielded, max. 1 000 m
● unshielded, max. 600 m
Interrupts/diagnostics/status information
Diagnostics function No
Substitute values connectable Yes
Alarms
● Diagnostic alarm No
● Maintenance interrupt Yes; maintenance alarm for switching cycle counter
Diagnoses
● Monitoring the supply voltage No
● Wire-break No
● Short-circuit No
Diagnostics indication LED


Similar products:


Siemens S7-1500, DQ 16x24V DC/0.5A HF; 6ES7522-1BH01-0AB0

SIMATIC S7-1500, digital output module DQ16x24 V DC/0.5A HF; 16 channels in groups of 8; 4 A per group; single-channel diagnostics; substitute value: switching cycle
-
Need to order

(Out of stock)

Price on request

Siemens S7-1500, DQ 16x24VDC/0.5A BA; 6ES7522-1BH10-0AA0

SIMATIC S7-1500, digital output module, DQ16xDC 24V/0.5A BA, 16 channels in groups of 8, 4 A per group; the module supports the safety-oriented shutdown of load
-
Need to order

(Out of stock)

Price on request

Siemens S7-1500, DQ 64x24VDC/0.3A SNK BA; 6ES7522-1BP50-0AA0

SIMATIC S7-1500, digital output module, DQ 64xDC 24V/0.3A SNK BA, 64 channels in groups of 16, 2 A per group at 60 °C, sourcing output, 35 mm wide cables and
-
Need to order

(Out of stock)

Price on request

Siemens ET 200MP, F-DQ 8x24VDC 2A PPM; 6ES7526-2BF00-0AB0

SIMATIC S7-1500, F digital output module, F-DQ 8x 24 V DC 2A PPM PROFIsafe; 35 mm width; up to PL E (ISO 13849-1)/ SIL3 (IEC 61508)
-
Need to order

(Out of stock)

Price on request

Siemens S7-1500, DQ 32x24VDC/0.5A HF; 6ES7522-1BL01-0AB0

SIMATIC S7-1500, digital output module DQ 32x24V DC/0.5A HF; 32 channels in groups of 8; 4 A per group; single-channel diagnostics; substitute value, switching cycle
-
Need to order

(Out of stock)

Price on request

Siemens S7-1500, DQ 32x24VDC/0.5A BA; 6ES7522-1BL10-0AA0

SIMATIC S7-1500, digital output module, DQ32xDC 24V/0.5A BA, 32 channels in groups of 8, 4 A per group; the module supports the safety-oriented shutdown of load
-
Need to order

(Out of stock)

Price on request

ELECTRO PNEUMATIC SOLUTIONS DOO

  • Jugoslovenska 2/13A, Čukarica, Beograd
  • Opening Times: Monday - Friday 8am-5pm
  • Telephone:
  • 011 257 1922
  • +381 64 659 66 55
  • +381 62 800 70 44
  • email: office@ep-solutions.rs

linkedin youtube instagram twitter facebook
1
2
3
Compare products Remove all products