Name: Siemens SIMATIC ET 200SP PS/1AC/24VDC/5A; 6EP7133-6AB00-0BN0
Brand: Siemens
SKU: 6EP7133-6AB00-0BN0
Availability: OutOfStock

Siemens SIMATIC ET 200SP PS/1AC/24VDC/5A; 6EP7133-6AB00-0BN0

SIMATIC ET 200SP PS 24V/5A Stabilized power supply Input: 120/230 V AC Output: 24 V DC/5 A...

Brand: Siemens
Product Code: 6EP7133-6AB00-0BN0
Availability: Check availability

Price on request

Description
Specification

SIMATIC ET 200SP PS 24V/5A Stabilized power supply Input: 120/230 V AC Output: 24 V DC/5 A

Input
type of the power supply network	1-phase AC
supply voltage at AC
● initial value	Automatic range selection
supply voltage
● 1 at AC rated value	120 V
● 2 at AC rated value	230 V
input voltage
● 1 at AC	85 ... 132 V
● 2 at AC	170 ... 264 V
design of input wide range input	No
overvoltage overload capability	2.3 × Vin rated, 1.3 ms
operating condition of the mains buffering	at Vin = 93/187 V
buffering time for rated value of the output current in the event of power failure minimum	20 ms
operating condition of the mains buffering	at Vin = 93/187 V
line frequency
● 1 rated value	50 Hz
● 2 rated value	60 Hz
line frequency	47 ... 63 Hz
input current
● at rated input voltage 120 V	2.16 A
● at rated input voltage 230 V	1.22 A
current limitation of inrush current at 25 °C maximum	45 A
I2t value maximum	3.15 A²·s
fuse protection type	T 3,15 A/250 V (not accessible)
● in the feeder	recommended LS switch: B/C 6 A/3 A
Output
voltage curve at output	Controlled, isolated DC voltage
output voltage at DC rated value	24 V
output voltage
● at output 1 at DC rated value	24 V
relative overall tolerance of the voltage	3 %
relative control precision of the output voltage
● on slow fluctuation of input voltage	0.1 %
● on slow fluctuation of ohm loading	1 %
residual ripple
● maximum	150 mV
● typical	50 mV
voltage peak
● maximum	240 mV
● typical	150 mV
adjustable output voltage	22.8 ... 28 V
product function output voltage adjustable	Yes
type of output voltage setting	via potentiometer
display version for normal operation	Green LED for 24 V OK
type of signal at output	Relay contact (NO contact, rating 60 V DC/ 0.3 A) for "24 V OK"
behavior of the output voltage when switching on	Overshoot of Vout < 3 %
response delay maximum	0.3 s
voltage increase time of the output voltage
● typical	30 ms
output current
● rated value	5 A
● rated range	0 ... 6 A; 5 A up to +60°C; +60 ... +70 °C: Derating 3%/K
supplied active power typical	120 W
short-term overload current
● on short-circuiting during the start-up typical	15 A
● at short-circuit during operation typical	15 A
duration of overloading capability for excess current
● on short-circuiting during the start-up	800 ms
● at short-circuit during operation	800 ms
product feature
● bridging of equipment	Yes
number of parallel-switched equipment resources for increasing the power	2
Efficiency
efficiency in percent	88 %
power loss [W]
● at rated output voltage for rated value of the output current typical	17 W
● during no-load operation maximum