Siemens SIMATIC ET 200SP TM ECC PL ST; 6FE1242-6TM20-0BB1
SIMATIC ET 200SP TM ECC PL ST Chargecontroller for conductiv Charging of electric vehicles according DIN SPEC 70121 Charging Mode 4 TEMP:-30°C...60°C 1x...
Price on request
| SIMATIC ET 200SP TM ECC PL ST Chargecontroller for conductiv Charging of electric vehicles according DIN SPEC 70121 Charging Mode 4 TEMP:-30°C...60°C 1x Control Pilot including Powerline Green Phy 1x Plug Present / Proximty Pilot 1x Digital Out TRIP-Funktion as Open Collector 1x Digital Out (DQ P) as Open Collector suitable for BU Typ BU20-P12+A0+4B or BU-Typ BU20-P12+A4+0B |
| General information | |
| Product type designation | ECC PL ST |
| HW functional status | 1 |
| Firmware version | V1.1 |
| ● FW update possible | Yes |
| Product description | Technology module for the conductive charging of electric vehicles according to DIN 70121 |
| usable BaseUnits | BU type B0, B1 |
| Number of channels | 1; Acc. to IEC 61851-1 Mode 4 and DIN SPEC 70121 |
| Product function | |
| ● I&M data | Yes; I&M0 to I&M3 |
| ● Isochronous mode | No |
| Engineering with | |
| ● STEP 7 TIA Portal configurable/integrated from version | STEP 7 V16 or higher |
| Installation type/mounting | |
| Mounting type | standard rail |
| Mounting position | Horizontal, vertical |
| Supply voltage | |
| Type of supply voltage | DC |
| Rated value (DC) | 24 V |
| permissible range, lower limit (DC) | 19.2 V |
| permissible range, upper limit (DC) | 28.8 V |
| Reverse polarity protection | Yes; against destruction |
| Load voltage L+ | |
| ● Rated value (DC) | 24 V |
| ● permissible range, lower limit (DC) | 19.2 V |
| ● permissible range, upper limit (DC) | 28.8 V |
| ● Reverse polarity protection | Yes |
| Input current | |
| Current consumption, typ. | 40 mA |
| Current consumption, max. | 100 mA |
| Digital inputs | |
| Number of digital inputs | 0 |
| Digital inputs, parameterizable | No |
| Cable length | |
| ● shielded, max. | 10 m |
| Digital outputs | |
| Type of digital output | Transistor |
| Number of digital outputs | 2; 1x digital out TRIP function as open collector, 1x digital out (DQ P) as open collector |
| Current-sinking | Yes |
| short-circuit proof | Yes |
| Digital output functions, parameterizable | |
| ● PWM output | Yes; Acc. to DIN SPEC 70121 |
| — Number, max. | 1; 1 per channel |
| — Cycle duration, parameterizable | No; 1 kHz |
| ● Connection of a DC motor | No; Only fixed charging cables are permitted for DC charging systems |
| Switching capacity of the outputs | |
| ● with resistive load, max. | 0.6 A; Per digital output |
| Output voltage | |
| ● Type of output voltage | DC |
| ● Rated value (DC) | 24 V |
| Cable length | |
| ● unshielded, max. | 10 m |
| Analog outputs | |
| Number of analog outputs | 1 |
| Type of analog output | Control pilot including Powerline Green Phy, acc. to DIN SPEC 70121 |
| Connection of a DC motor | No |
| Protocols | |
| Bus communication | Yes; Backplane bus |
| Vehicle communication according to IEC 61851 | Yes; Mode 4 |
| Interrupts/diagnostics/status information | |
| Alarms | |
| ● Diagnostic alarm | Yes |
| Diagnoses | |
| ● Monitoring the supply voltage | No; Supply voltage diagnostics |
| ● Wire-break | No |
| ● Short-circuit | No |
| Diagnostics indication LED | |
| ● ERROR LED | No |
| ● Monitoring of the supply voltage (PWR-LED) | Yes; green PWR LED |
| ● Channel status display | Yes; green LED |
| ● for module diagnostics | Yes; green/red DIAG LED |
| Potential separation | |
| Potential separation channels | |
| ● between the channels | No; Only one channel is available |
Similar products:
Siemens F-TM ServoDrive ST; 6BK1136-6AB00-0BU0
SIMATIC F-TM ServoDrive ST, drive controller for servo drives in the safety extra low voltage range, 24 to 48 V DC power supply of the drive, output current 5 A,
-
(Out of stock)
Price on request
Siemens F-TM StepDrive ST; 6BK1136-6SB00-0BU0
SIMATIC F-TM StepDrive ST, drive controller for stepper motors in the safety extra low voltage range, 24 to 48 V DC power supply of the drive, output current 5 A,
-
(Out of stock)
Price on request
Siemens F-TM ServoDrive HF; 6BK1136-6AB00-0CU0
SIMATIC F-TM ServoDrive HF, drive controller for servo and stepper motors in safety low-voltage area, 24 to 48 V DC power supply of the drive, rated current 5A,
-
(Out of stock)
Price on request
Siemens ET 200SP TM SIWAREX WP351 HF; 7MH4138-6BA00-0CU0
SIMATIC ET 200SP, TM SIWAREX WP351 HF, verifiable weighing module for automatic dosing-, filling-, checking- and totalizing scales, 3xDI, 3xDQ, 1xCI,1xRS485, 1xEthernet,
-
(Out of stock)
Price on request
Siemens ET 200SP, TM PTO 2x24V; 6ES7138-6EB00-0BA0
SIMATIC ET 200SP, TM PTO 2x24 V, interface module for stepper drives, 2 channels pulse train output, PTO: 24 V, 2 DI, 1 DQ 24 V DC per channel, suitable for BU type
-
(Out of stock)
Price on request
Siemens SIMATIC ET 200SP TM ECC 2xPWM ST; 6FE1242-6TM10-0BB1
SIMATIC ET 200SP TM ECC 2xPWM ST Chargecontroller f. conductive charging of electric vehicles according IEC61851 mode 3 for 2 Charging points -30°C...60°C
-
(Out of stock)
Price on request