Siemens SITRANS FCT070 Coriolis flow transmitter; 7ME4138-6AA00-0BB1
SITRANS FCT070 Coriolis flow transmitter for use as technology module together with SIMATIC ET 200SP (IM155-6PN HF). Via faceplates suitable for operation in SIMATIC...
Price on request
| SITRANS FCT070 Coriolis flow transmitter for use as technology module together with SIMATIC ET 200SP (IM155-6PN HF). Via faceplates suitable for operation in SIMATIC PCS7 or TIA Portal. Real-time data processing allows to display all process and status values of any Coriolis flow sensor equipped with DSL. |
| General information | |
| Product type designation | TM FCT070 |
| Firmware version | V1.0 |
| ● FW update possible | Yes |
| usable BaseUnits | BU type B1 |
| Color code for module-specific color identification plate | CC40 |
| Product function | |
| ● I&M data | Yes; I&M 0 |
| Engineering with | |
| ● STEP 7 TIA Portal configurable/integrated from version | V16 |
| ● STEP 7 configurable/integrated from version | V5.5 SP4 and higher |
| ● PROFINET from GSD version/GSD revision | GSDML V2.34 |
| Supply voltage | |
| Rated value (DC) | 24 V |
| Load voltage L+ | |
| ● Rated value (DC) | 24 V |
| ● permissible range, lower limit (DC) | 19.2 V |
| ● permissible range, upper limit (DC) | 28.8 V |
| ● Short-circuit protection | Yes |
| ● Reverse polarity protection | Yes; against destruction |
| Input current | |
| Current consumption, max. | 500 mA |
| Power | |
| Active power input | 1.2 W |
| Address area | |
| Address space per module | |
| ● Inputs | 83 byte |
| ● Outputs | 7 byte |
| Hardware configuration | |
| Automatic encoding | Yes |
| ● Mechanical coding element | Yes |
| ● Type of mechanical coding element | type D |
| Digital inputs | |
| Number of digital inputs | 2 |
| Digital inputs, parameterizable | Yes |
| Input characteristic curve in accordance with IEC 61131, type 3 | Yes |
| Digital input functions, parameterizable | |
| ● product function, parameterizable | start dosing, stop dosing, pause dosing, continue dosing, force output, freeze output, zero adjust, reset totalizer 1, reset totalizer 2, reset totalizer 3 |
| ● Freely usable digital input | Yes |
| Input voltage | |
| ● Type of input voltage | DC |
| ● Rated value (DC) | 24 V |
| ● for signal "0" | -30 to +5 V |
| ● for signal "1" | +11 to +30V |
| ● permissible voltage at input, min. | -30 V |
| ● permissible voltage at input, max. | 30 V |
| Input current | |
| ● for signal "1", typ. | 2.5 mA |
| Cable length | |
| ● shielded, max. | 50 m; depending on load and cable quality |
| ● unshielded, max. | 25 m; depending on load and cable quality |
| Digital outputs | |
| Number of digital outputs | 2 |
| Current-sourcing | Yes |
| Digital outputs, parameterizable | Yes |
| Short-circuit protection | Yes; electronic/thermal |
| Digital output functions, parameterizable | |
| ● Freely usable digital output | Yes |
| Switching capacity of the outputs | |
| ● with resistive load, max. | 300 mA |
| ● on lamp load, max. | 8 W |
| Load resistance range | |
| ● lower limit | 80 Ω |
| ● upper limit | 10 kΩ |
| Output voltage | |
| ● Type of output voltage | DC |
| ● for signal "0", max. | 1 V |
| ● for signal "1", min. | 23.2 V; L+ (-0.8 V) |
| Output current | |
| ● for signal "1" rated value | 300 mA |
| Switching frequency | |
| ● switching frequency, min. | 0 Hz |
| ● switching frequency, max. | 12 Hz |
| Pulse output (passive) | |
| ● Output voltage, max. | 23.2 V |
Similar products:
Siemens SIMATIC ET 200SP TM ECC 2xPWM ST; 6FE1242-6TM10-0BB1
SIMATIC ET 200SP TM ECC 2xPWM ST Chargecontroller f. conductive charging of electric vehicles according IEC61851 mode 3 for 2 Charging points -30°C...60°C
-
(Out of stock)
Price on request
Siemens SIMATIC ET 200SP TM ECC PL ST; 6FE1242-6TM20-0BB1
SIMATIC ET 200SP TM ECC PL ST Chargecontroller for conductiv Charging of electric vehicles according DIN SPEC 70121 Charging Mode 4 TEMP:-30°C...60°C 1x
-
(Out of stock)
Price on request
Siemens F-TM ServoDrive ST; 6BK1136-6AB00-0BU0
SIMATIC F-TM ServoDrive ST, drive controller for servo drives in the safety extra low voltage range, 24 to 48 V DC power supply of the drive, output current 5 A,
-
(Out of stock)
Price on request
Siemens F-TM StepDrive ST; 6BK1136-6SB00-0BU0
SIMATIC F-TM StepDrive ST, drive controller for stepper motors in the safety extra low voltage range, 24 to 48 V DC power supply of the drive, output current 5 A,
-
(Out of stock)
Price on request
Siemens F-TM ServoDrive HF; 6BK1136-6AB00-0CU0
SIMATIC F-TM ServoDrive HF, drive controller for servo and stepper motors in safety low-voltage area, 24 to 48 V DC power supply of the drive, rated current 5A,
-
(Out of stock)
Price on request
Siemens Technology module SITRANS FST070; 7ME3448-6AA00-0BB1
The technology module SITRANS FST070 is a ultrasonic flow transmitter for the SIMATIC ET 200SP. The TM FCT070 flow transmitter can be operated directly in the SIMATIC
-
(Out of stock)
Price on request