EUCHNER Non-contact safety switch CET3-AP-CRA-CH-50X-SA-122409; 122409
Non-contact safety switch CET-AP-..., M12 Safety switch with guard locking and integrated evaluation electronics Locking force up to 6500 N Short circuit monitoring...
Cena na upit
Non-contact safety switch CET-AP-..., M12
- Safety switch with guard locking and integrated evaluation electronics
- Locking force up to 6500 N
- Short circuit monitoring
- 2 safety outputs (semiconductor outputs)
- Category 4 / PL e according to EN ISO 13849-1
- With 1 plug connector M12, 8-pin
- Multicode
- Door monitoring output
- Indication of the door position by LED
- Monitoring output DIA
- Approach direction A (delivery state)
Approvals
Workspace
Repeat accuracy R | |
according to EN 60947-5-2 | 10 % |
Electrical connection values
Fuse | |
external (operating voltage UB) | 0.25 ... 8 A |
external (solenoid operating voltage UCM) | 0.5 ... 8 A |
Power consumption | |
Solenoid | 11 W |
Connecting cable | 30V DC, 2A |
Operating voltage DC | |
UB | 24 V DC -15% ... +15% reverse polarity protected, regulated, residual ripple<5%, PELV |
LED | 24 V DC -15% V DC ... +10% V DC |
EMC protection requirements | Acc. to EN IEC 60947-5-3 |
Utilization category | |
DC-13 | 24 V 200 mA |
Solenoid operating voltage DC | |
UCM | 24 V DC -15% ... +10% reverse polarity protected, regulated, residual ripple<5%, PELV |
Solenoid duty cycle | 100 % |
Risk time according to EN 60947-5-3 | max. 400 ms |
Switching load | |
according to UL | 24V DC, Class 2 |
Safety class | |
EN IEC 61140 | III |
Current consumption | |
IB | 80 mA |
ICM | 450 mA |
Test pulse duration | max. 0.3 ms |
Degree of contamination (external, according to EN 60947-1) | 3 |
Monitoring output DIA | |
Output type | p-switching, short circuit-proof |
Output voltage | |
DIA | 0.8xUB ... UB V DC |
Switching current | |
DIA | 1 ... 50 mA |
Switching delay from state change | max. 400 ms |
Monitoring output OUT D | |
Output type | p-switching, short circuit-proof |
Output voltage | |
OUT D | 0.8xUB ... UB V DC |
Switching current | |
OUT D | 1 ... 50 mA |
Switching delay from state change | max. 700 ms |
Safety outputs OA / OB | |
Output type | 2 semiconductor outputs, p-switching, short circuit-proof |
Output voltage | |
HIGH U(OA,OB) | UB-1.5V ... UB V DC |
LOW U(OA,OB) | 0 ... 1 V DC |
Discrepancy time | |
both safety outputs | max. 10 ms |
Turn-on time | 400 ms |
Off-state current Ir | max. 0.25 mA |
Risk time according to EN 60947-5-3 | |
Single device | |
Switching current | |
per safety output OA / OB | 1 ... 200 mA |
Mechanical values and environment
Approach speed | max. 20 m/min |
Connection type | 1 plug connector M12, 8-pin |
Ready delay | 1 s |
Installation orientation | any |
Switching frequency | max. 0.5 Hz |
Degree of freedom X | ±5 mm |
Degree of freedom Y | ±5 mm |
Degree of freedom Z | ±4 mm |
Mechanical life | 2 x 10⁶ |
Shock and vibration resistance | Acc. to EN IEC 60947-5-3 |
Degree of protection | IP67 |
Ambient temperature | |
at UB = 24 V DC | -20 ... +55 °C |
Material | |
Ramp | Stainless steel |
Safety switch housing | Die-cast aluminum |
Locking force Fmax | 6500 N |
Locking force FZh | 5000 N |
Guard locking principle | Closed-circuit current principle |
Characteristic values according to EN ISO 13849-1 and EN IEC 62061
Mission time | 20 y |
Control of guard locking | |
Category | Depending on external control of guard locking |
Performance Level | Depending on external control of guard locking |
PFHD | Depending on external control of guard locking |
Monitoring of guard locking and the guard position | |
Category | |
Any installation orientation | 4 |
Performance Level | PL e |
PFHD | |
Any installation orientation | 3.1 x 10 |
Slicni proizvodi:
EUCHNER Non-contact safety switch CET4-AP-CRA-AH-50X-SI-C2438-126763; 126763
Non-contact safety switch CET-AP-..., for connection to decentralized peripheral systems Safety switch with guard locking and integrated evaluation electronics Locking
-
(Trenutno nema na stanju)
Cena na upit
EUCHNER Non-contact safety switch CET3-AP-CRA-CH-50F-SA-C2312-157287; 157287
Non-contact safety switch CET-AP-..., M12 Safety switch with guard locking and integrated evaluation electronics Locking force up to 6500 N Short circuit monitoring
-
(Trenutno nema na stanju)
Cena na upit
EUCHNER Non-contact safety switch CET3-AP-CRA-CH-50X-SA-121579; 121579
Non-contact safety switch CET-AP-..., M12 Safety switch with guard locking and integrated evaluation electronics Locking force up to 6500 N Short circuit monitoring
-
(Trenutno nema na stanju)
Cena na upit
EUCHNER Non-contact safety switch CET4-AP-CRA-AH-50X-SA-122415; 122415
Non-contact safety switch CET-AP-..., M12 Safety switch with guard locking and integrated evaluation electronics Locking force up to 6500 N Short circuit monitoring
-
(Trenutno nema na stanju)
Cena na upit
EUCHNER Non-contact safety switch CET4-AP-CRA-AH-50X-SI-112082; 112082
Non-contact safety switch CET-AP-..., for connection to decentralized peripheral systems Safety switch with guard locking and integrated evaluation electronics Locking
-
(Trenutno nema na stanju)
Cena na upit
EUCHNER Actuator CET-A-BWK-50X ; 096327
Actuator CET-A-BWK-50X ; 096327 Actuator for read head/safety switch CET Four M5x16 safety screws included in scope of delivery
-
(Trenutno nema na stanju)
Cena na upit