EUCHNER Transponder-coded safety switch CTP-AR, M23, emergency stop, 2 push buttons ; 137165

Transponder-coded safety switch CTP-AR, M23, emergency stop, 2 push buttons Safety switch with guard locking and integrated evaluation electronics Up to 20 switches...

Brand: EUCHNER
Šifra: 137165
Dostupnost: Proveriti dostupnost
Cena na upit

Transponder-coded safety switch CTP-AR, M23, emergency stop, 2 push buttons

  • Safety switch with guard locking and integrated evaluation electronics
  • Up to 20 switches in series
  • Short circuit monitoring
  • Two safety outputs (semiconductor outputs)
  • Up to category 4/PL e according to EN ISO 13849-1
  • Emergency stop
  • Two pushbuttons (illuminated)
  • With plug connector M23
  • Unicode
  • Door monitoring output
  • Approach directions A, B and C (delivery state)

Approvals

Zulassung EACZulassung c_UL_us LISTED Class 2 or LV/C

Mechanical values and environment

Housing material  
Switch head cover Die-cast zinc
Safety switch housing Fiber glass reinforced thermoplastic
Weight  
Net 0,5 kg
Ambient temperature  
At UB = 24V DC -20 ... +55 °C
Degree of protection IP65
Resilience to vibration In acc. with EN IEC 60947-5-3
Mechanical life 1 x 106
Installation orientation Any
Ready delay 8 s
Switching frequency max.0,5 Hz
Connection 1 plug connector M23, 19-pin, RC18
Approach speed max.20 m/min
Guard locking principle Open-circuit current principle
Locking force Fmax 3900 N
Locking force FZh 3000 N
Retention force 20 N
Extraction force 20 N
Actuating force 10 N
Overtravel 5 mm

Electrical connection ratings

Test-pulse interval min.140 ms
Test pulses max.1,0 ms
Operating voltage DC  
UUB 24 V DC -15% ... 15% Reverse polarity protected, regulated, residual ripple < 5%, PELV
Current consumption  
IUB 40 mA
IIMP 400 mA
Utilization category according to EN 60947-5-2  
DC-13 24V 150mA
Solenoid operating voltage DC  
UIMP 24 V DC -15% ... +10% Reverse polarity protected, regulated, residual ripple < 5%, PELV
Fusing  
External (operating voltage UB) 0,25 ... 2 A
External (solenoid operating voltage IMP) 0,5 ... 8 A
Rated insulation voltage Ui max.50 V
Rated impulse withstand voltage Uimp max.0,5 kV
Power consumption 6 W
EMC protection requirements In acc. with EN IEC 60947-5-3
Solenoid duty cycle 100 %
Degree of contamination (external, according to EN 60947-1) 3
Safety class  
EN IEC 61140 III
Risk time according to EN 60947-5-3  
Delay per device 5 ms
Single device max.260 ms
Switching load  
According to UL 24V DC, class 2
  Safety outputs FO1A / FO1B
Type of output 2 semiconductor outputs, p-switching, short circuit-proof
Switching current  
Per safety output FO1A / FO1B 1 ... 150 mA
Output voltage  
High U(FO1A) / U(FO1B) UB-1,5 ... UB V DC
Low U(FO1A) / U(FO1B) 0 ... 1 V DC
Off-state current Ir max.0,25 mA
Switch-on time max.400 ms
Discrepancy time  
Both safety outputs max.10 ms In acc. with EN IEC 60947-5-3
  Monitoring output OD
Type of output p-switching, short circuit-proof
Switching current 1 ... 50 mA
Output voltage 0,8xUB ... UB V DC
  Monitoring output OI
Type of output p-switching, short circuit-proof
Switching current 1 ... 50 mA
Output voltage 0,8xUB ... UB V DC
  Controls and indicators
Operating voltage UB V
Operating current 1 ... 50 mA
Power supply  
LED 24 V
Current consumption  
LED 10 mA
  Emergency stop
Operating voltage 5 ... 24 V
Operating current 1 ... 100 mA

Work area

Repeat accuracy R  
According to EN 60947-5-2 10 %

Controls and indicators

 
  Position 1
Ausführung Emergency stop
Einlegeschild  
Extras  
Farbe  
Schaltelement 2 pos. driven NC
 
  Position 2
Ausführung Illuminated push buttons
Einlegeschild  
Extras  
Farbe  
Schaltelement 1NO
 
  Position 3
Ausführung Illuminated push buttons
Einlegeschild  
Extras  
Farbe  
Schaltelement 1NO

Other

Additional feature Incl. cover set ID. No. 120344
For the approval according to UL the following applies Operation only with UL class 2 power supply, or equivalent measures see operating instructions

Reliability values according to EN ISO 13849-1

  Emergency stop
B10D 0,065 x 106
Performance Level PL e
Category 4
PFHD 4.1 x 10 -9
Mission time 20 y
  • 391735

    391735

  • 402297

    402297



Slicni proizvodi:


EUCHNER Transponder-coded safety switch CTP-L2-AR-U-HA-AZ-SAB-122814; 122814

Transponder-coded safety switch CTP-AR, 2 x M12 Safety switch with guard locking and integrated evaluation electronics Up to 20 switches in series Short circuit
-
Need to order

(Trenutno nema na stanju)

Cena na upit

EUCHNER Transponder-coded safety switch CTP-L2-AR-U-HA-AZ-SH-123366; 123366

Transponder-coded safety switch CTP-AR, M23 Safety switch with guard locking and integrated evaluation electronics Up to 20 switches in series Short circuit monitoring
-
Need to order

(Trenutno nema na stanju)

Cena na upit

EUCHNER Transponder-coded safety switch CTP-L2-AR-M-HA-AZ-SAB-123361; 123361

Transponder-coded safety switch CTP-AR, 2 x M12 Safety switch with guard locking and integrated evaluation electronics Up to 20 switches in series Short circuit
-
Need to order

(Trenutno nema na stanju)

Cena na upit

EUCHNER Transponder-coded safety switch CTP-L2-AR-M-HA-AZ-SH-123369; 123369

Transponder-coded safety switch CTP-AR, M23 Safety switch with guard locking and integrated evaluation electronics Up to 20 switches in series Short circuit monitoring
-
Need to order

(Trenutno nema na stanju)

Cena na upit

EUCHNER Transponder-coded safety switch CTP-L2-AR-U-HA-AEE-SH-159112; 159112

Transponder-coded safety switch CTP-AR, M23, emergency stop, 2 pushbuttons (extended), with escape release Safety switch with guard locking and integrated evaluation
-
Need to order

(Trenutno nema na stanju)

Cena na upit

EUCHNER CTP-L1-AR-M-HA-AE-SH ; 123374

Safety switch with guard locking and safe guard lock monitoring Integrated CES-AR electronics Safety category 4 and PL e according to EN ISO 13849-1 Compatible mounting
-
Need to order

(Trenutno nema na stanju)

Cena na upit

1
2
3
Uporedi proizvode Ukloni sve proizvode