Festo Cartridge cylinder EGZ-10-5 ; 15036
Through-hole screw-in short single-acting cylinder. Minimal fitting space Installation with or without mounting components External piston rod thread...
Cena na upit
Through-hole screw-in short single-acting cylinder.
- Minimal fitting space
- Installation with or without mounting components
- External piston rod thread
- Stroke
- 5 mm
- Piston diameter
- 10 mm
- Type code
- EGZ
- Cushioning
- No cushioning
- Mounting position
- Any
- Mode of operation
-
Pushing
Single-acting - Design
-
Piston rod
Piston
Cylinder barrel - Position sensing
- None
- Symbol
- 00991200
- Variants
- Piston rod at one end
- Operating pressure
- 1.5 bar ... 8 bar
- Operating medium
- Compressed air as per ISO 8573-1:2010 [7:-:-]
- Corrosion resistance class (CRC)
- 2 - Moderate corrosion stress
- Ambient temperature
- -20 °C ... 80 °C
- Theoretical force at 6 bar
- 42 N
- Theoretical force at 6 bar, advancing
- 42 N
- Type of mounting
-
With external thread
With lock nut
Optionally: - Pneumatic connection
- M5
- Cover material
- POM
- Seals material
- TPE-U(PU)
- Housing material
-
Brass
Nickel-plated - Piston rod material
- High-alloy steel
-
15036datasheet
-
EGZ ENUS
Slicni proizvodi:
Festo ISO cylinder DSBC-40-100-PPVA-N3 ; 1376660
ISO 15552 (ISO 6431, VDMA 24562) Self-adjusting pneumatic end-position cushioning which adapts optimally to changes in load and speed Standard profile with two sensor
-
(Trenutno nema na stanju)
Cena na upit
Festo ISO cylinder DSBC-50-80-PPVA-N3 ; 1366951
ISO 15552 (ISO 6431, VDMA 24562) Self-adjusting pneumatic end-position cushioning which adapts optimally to changes in load and speed Standard profile with two sensor
-
(Trenutno nema na stanju)
Cena na upit
Festo ISO cylinder to ISO 21287 ADN ; 536203
ADN-12-100-A-P-A ISO cylinder to ISO 21287 for fixed or self-adjusting cushioning with high variance. ISO 21287 Up to 50% less installation space than comparable
-
(Trenutno nema na stanju)
Cena na upit
Festo Profile cylinder to ISO 15552 DSBC ; 1463250
DSBC-Q-32-40-PPSA-N3 ISO profile cylinder to ISO 15552 with clamping fixture for the piston rod. A wide range of mounting options. Without additional measures for
-
(Trenutno nema na stanju)
Cena na upit
Festo ISO cylinder CRDSNU-B-16-40-P-A-MG-A1 ; 8073761
With NSF-H1 grease and a clean design. Very reliable and durable due to dry-running seal. And always correctly adjusted thanks to the self-adjusting end position
-
(Trenutno nema na stanju)
Cena na upit
Festo Guided actuator DFM-12-30-P-A-GF ; Pneumatic actuators
Guided actuator DFM-12-30-P-A-GF ; Pneumatic actuators
-
(Trenutno nema na stanju)
Cena na upit