Festo ISO cylinder DNC-50- - ; 163366
Mounting hole pattern to ISO 15552 Assembled and fitted with tubing ready for connection Particularly suitable for decentralized use in larger systems Valve variants:...
Cena na upit
- Mounting hole pattern to ISO 15552
- Assembled and fitted with tubing ready for connection
- Particularly suitable for decentralized use in larger systems
- Valve variants: single or double solenoid valves, mounted on the right or left
- Magnetic piston for position sensing
- Wide range of variants for customized applications
- Maritime classification
- See certificate
- Stroke
- 2 mm ... 2000 mm
- Piston diameter
- 50 mm
- Type code
- DNC
- Based on norm
- ISO 15552
- Cushioning
-
Elastic cushioning rings/pads at both ends
Pneumatic cushioning, adjustable at both ends - Mounting position
- Any
- Design
-
Piston
Piston rod
Profile barrel - Position sensing
-
For proximity sensor
None - Variants
-
Clamping unit on the piston rod
Monostable pneumatic valve, mounted on left, piston rod retracted when not actuated
Piston rod at one end
Low friction
Extended piston rod
Increased service life
Bistable pneumatic valve, fitted on right, piston rod retracted when not actuated
Temperature range -40 to 80 °C
Special thread on piston rod
Through piston rod
Internal thread on piston rod
Monostable pneumatic valve, fitted on right, piston rod extended when not actuated
Piston rod with external hexagon
With anti-twist protection
High corrosion protection
Heat-resistant seals max. 120°C
Monostable pneumatic valve, fitted on left, piston rod extended when not actuated
Dust protection
With rear end-position locking
Extended external thread piston rod
Monostable pneumatic valve, mounted on right, piston rod retracted when not actuated
With front end-position locking
With end-position locking at both ends
Bistable pneumatic valve, fitted on left, piston rod retracted when not actuated
Continuous, hollow piston rod
Constant, slow movement - Protection against torsion/guide
- Square piston rod
- Operating pressure
- 0.2 bar ... 12 bar
- Mode of operation
- Double-acting
- ATEX category gas
- II 2G
- Type of ignition protection for gas
- Ex h IIC T4 Gb
- ATEX category for dust
- II 2D
- Type of (ignition) protection for dust
- Ex h IIIC T120°C Db
- Explosive ambient temperature
- -20°C <= Ta <= +60°C
- Explosion prevention and protection
-
Zone 1 (ATEX)
Zone 2 (ATEX)
Zone 22 (ATEX)
Zone 21 (ATEX) - Operating medium
- Compressed air as per ISO 8573-1:2010 [7:4:4]
- Information on operating and pilot media
- Operation with oil lubrication possible (required for further use)
- CE marking (see declaration of conformity)
- as per EU explosion protection directive (ATEX)
- Corrosion resistance class (CRC)
-
3 - High corrosion stress
2 - Moderate corrosion stress - Ambient temperature
- -40 °C ... 120 °C
- Impact energy in the end positions
- 0.2 J
- Max. torque for protection against rotation
- 1.5 Nm
- Theoretical force at 6 bar, retracting
- 990 N
- Theoretical force at 6 bar, advancing
- 990 N ... 1178 N
- Type of mounting
-
With internal thread
With accessories - Pneumatic connection
- G1/4
- Note on materials
- RoHS-compliant
- Cover material
-
Coated
Die-cast aluminum - Material of cylinder barrel
-
Wrought aluminum alloy
Smooth anodized
-
DNC ENUS
Slicni proizvodi:
Festo Guided actuator DFM-12-30-P-A-GF ; 170827
Place your trust in precise guidance and great absorption of torques and shear forces - coupled with a sturdy, compact design. The guided actuator DFM is suitable
-
(Trenutno nema na stanju)
Cena na upit
Festo Guided actuator DFM-12-30-P-A-GF ; Pneumatic actuators
Guided actuator DFM-12-30-P-A-GF ; Pneumatic actuators
-
(Trenutno nema na stanju)
Cena na upit
Festo Short-stroke cylinder AEVC-12-5-I-P ; 188082
Short-stroke cylinder AEVC-12-5-I-P ; 188082
-
(Trenutno nema na stanju)
Cena na upit
Festo ISO cylinder DNC-80- - ; 163430
Mounting hole pattern to ISO 15552 Assembled and fitted with tubing ready for connection Particularly suitable for decentralized use in larger systems Valve variants:
-
(Trenutno nema na stanju)
Cena na upit
Festo ISO cylinder DNC-32- - ; 163302
Mounting hole pattern to ISO 15552 Assembled and fitted with tubing ready for connection Particularly suitable for decentralized use in larger systems Valve variants:
-
(Trenutno nema na stanju)
Cena na upit
Festo ISO cylinder DSNU-25-40-P-A ; 19220
ISO cylinder DSNU-25-40-P-A
-
(Trenutno nema na stanju)
Cena na upit