Festo ISO cylinder DNC-80- - ; 163430
Mounting hole pattern to ISO 15552 Assembled and fitted with tubing ready for connection Particularly suitable for decentralized use in larger systems Valve variants:...
Cena na upit
- Mounting hole pattern to ISO 15552
- Assembled and fitted with tubing ready for connection
- Particularly suitable for decentralized use in larger systems
- Valve variants: single or double solenoid valves, mounted on the right or left
- Magnetic piston for position sensing
- Wide range of variants for customized applications
- Maritime classification
- See certificate
- Stroke
- 3 mm ... 2000 mm
- Piston diameter
- 80 mm
- Type code
- DNC
- Based on norm
- ISO 15552
- Cushioning
-
Elastic cushioning rings/pads at both ends
Pneumatic cushioning, adjustable at both ends - Mounting position
- Any
- Design
-
Piston
Piston rod
Profile barrel - Position sensing
-
For proximity sensor
None - Variants
-
Increased service life
Temperature range -40 to 80 °C
Through piston rod
Heat-resistant seals max. 120°C
Monostable pneumatic valve, mounted on left, piston rod retracted when not actuated
With rear end-position locking
Low friction
Monostable pneumatic valve, fitted on left, piston rod extended when not actuated
Extended external thread piston rod
With anti-twist protection
Monostable pneumatic valve, fitted on right, piston rod extended when not actuated
Continuous, hollow piston rod
Special thread on piston rod
With end-position locking at both ends
Constant, slow movement
Bistable pneumatic valve, fitted on left, piston rod retracted when not actuated
With front end-position locking
Piston rod with external hexagon
Extended piston rod
Dust protection
Internal thread on piston rod
High corrosion protection
Monostable pneumatic valve, mounted on right, piston rod retracted when not actuated
Piston rod at one end
Bistable pneumatic valve, fitted on right, piston rod retracted when not actuated
Clamping unit on the piston rod - Protection against torsion/guide
- Square piston rod
- Operating pressure
- 12 bar
- Mode of operation
- Double-acting
- ATEX category gas
- II 2G
- Type of ignition protection for gas
- Ex h IIC T4 Gb
- ATEX category for dust
- II 2D
- Type of (ignition) protection for dust
- Ex h IIIC T120°C Db
- Explosive ambient temperature
- -20°C <= Ta <= +60°C
- Explosion prevention and protection
-
Zone 2 (ATEX)
Zone 22 (ATEX)
Zone 21 (ATEX)
Zone 1 (ATEX) - Operating medium
- Compressed air as per ISO 8573-1:2010 [7:4:4]
- Information on operating and pilot media
- Operation with oil lubrication possible (required for further use)
- CE marking (see declaration of conformity)
- as per EU explosion protection directive (ATEX)
- Corrosion resistance class (CRC)
-
2 - Moderate corrosion stress
3 - High corrosion stress - Ambient temperature
- -40 °C ... 120 °C
- Impact energy in the end positions
- 0.9 J
- Max. torque for protection against rotation
- 3 Nm
- Theoretical force at 6 bar, retracting
- 2721 N
- Theoretical force at 6 bar, advancing
- 2721 N ... 3016 N
- Type of mounting
-
With internal thread
With accessories - Pneumatic connection
- G3/8
- Note on materials
- RoHS-compliant
- Cover material
-
Die-cast aluminum
Coated - Material of cylinder barrel
-
Wrought aluminum alloy
Smooth anodized
-
163430datasheet
-
DNC ENUS
Slicni proizvodi:
Festo Guided actuator DFM-12-30-P-A-GF ; 170827
Place your trust in precise guidance and great absorption of torques and shear forces - coupled with a sturdy, compact design. The guided actuator DFM is suitable
-
(Trenutno nema na stanju)
Cena na upit
Festo ISO cylinder DSBC-50-400-PPVA-N3 ; 1366958
ISO profile cylinder to ISO 15552 with a wide range of mounting options. DSBC-50-400-PPVA-N3 Part no. 1366958 ISO 15552 (ISO 6431, VDMA 24562) Self-adjusting pneumatic
-
(Trenutno nema na stanju)
Cena na upit
Festo ISO cylinder DSBC-...-80- - ; 1463495
Cylinder with clamping unit, ISO. Festo Cylinder DSBC-...-80- -
-
(Trenutno nema na stanju)
Cena na upit
Festo ISO cylinder DNC-32- - ; 163302
Mounting hole pattern to ISO 15552 Assembled and fitted with tubing ready for connection Particularly suitable for decentralized use in larger systems Valve variants:
-
(Trenutno nema na stanju)
Cena na upit
Festo ISO cylinder DNC-50- - ; 163366
Mounting hole pattern to ISO 15552 Assembled and fitted with tubing ready for connection Particularly suitable for decentralized use in larger systems Valve variants:
-
(Trenutno nema na stanju)
Cena na upit
Festo ISO cylinder ESNU-25-50-P-A ; 19271
Festo ISO cylinder ESNU-25-50-P-A
-
(Trenutno nema na stanju)
Cena na upit