Festo Profile cylinder to ISO 15552 DSBC ; 1463250
DSBC-Q-32-40-PPSA-N3 ISO profile cylinder to ISO 15552 with clamping fixture for the piston rod. A wide range of mounting options. Without additional measures for...
Cena na upit
DSBC-Q-32-40-PPSA-N3
ISO profile cylinder to ISO 15552 with clamping fixture for the piston rod. A wide range of mounting options. Without additional measures for compliance with statutory minimum requirements, the product is not suitable as a safety-relevant component in control systems.
ISO profile cylinder to ISO 15552 with clamping fixture for the piston rod. A wide range of mounting options. Without additional measures for compliance with statutory minimum requirements, the product is not suitable as a safety-relevant component in control systems.
- Piston rod can be held in any position
- Piston rod can be held in position for long periods even with alternating loads, fluctuating operating pressure, or leaks in the system
- Mounting hole pattern to ISO 15552
- Piston rod with internal or external thread
- Magnetic piston for position sensing
| Karakteristika | Vrednost |
|---|---|
| Pomeranje | 40 mm |
| Piston Ø | 32 mm |
| Kratka oznaka tipa | DSBC |
| Prigušenje | samopodesivo pneumatsko prigušenje krajnjeg položaja |
| Položaj ugradnje | Proizvoljno |
| Izvedba |
Klip Klipnjača Profilna cev |
| Prepoznavanje položaja | za blizinski prekidač |
| Pogonski pritisak | 0.05 ... 12.0 bar |
| Način rada | dvostruko dejstvo |
| Pogonski fluid | Komprimovani vazduh prema ISO 8573-1:2010 [7:4:4] |
| Note operating/pilot medium | Moguć pogon sa uljnim podmazivanjem (neophodno u nastavku rada) |
| Corrosion resistance CRC | 2 - umereno opterećenje korozijom |
| Temperatura okoline | -20 ... 80 °C |
| Impact energy in end p. | 0,4 J |
| Theor. force 6 bar, ret. | 415 N |
| Theor. force 6 bar, adv.. | 483 N |
| Perm. mov. mas. p.10mm h. |
0 g 8 g |
| Vrsta pričvršćenja |
sa unutrašnjim navojem sa dodatnom opremom po izboru: |
| Pneumatski priključak | Spoljašnji navoj G1/8 |
| Napomena o materijalu |
Sadrži materijale koji sadrže LABS U skladu sa RoHS |
| Information about cover materials | Die-cast aluminium, coated |
| Info on cylinder barrel material | Smooth-anodised wrought aluminium alloy |
-
1463250datasheet
-
DSBC ENUS
Slicni proizvodi:
Festo ISO cylinder DSBC-40-100-PPVA-N3 ; 1376660
ISO 15552 (ISO 6431, VDMA 24562) Self-adjusting pneumatic end-position cushioning which adapts optimally to changes in load and speed Standard profile with two sensor
-
(Trenutno nema na stanju)
Cena na upit
Festo ISO cylinder DSBC-100-125-PPVA-N3 ; 1384809
ISO profile cylinder to ISO 15552 with a wide range of mounting options. DSBC-100-125-PPVA-N3 Part no. 1384809 ISO 15552 (ISO 6431, VDMA 24562) Self-adjusting pneumatic
-
(Trenutno nema na stanju)
Cena na upit
Festo ISO cylinder DNC-125-320-PPV-A ; 163506
Profile cylinder based on ISO 15552 standard with fixed or adjustable cushioning. DNC-125-320-PPV-A Part no. 163506 ISO 15552 (ISO 6431, VDMA 24562) Wide range of
-
(Trenutno nema na stanju)
Cena na upit
Festo Festo ISO cylinder DNC-125-200-PPV-A ; 163504
Profile cylinder based on ISO 15552 standard with fixed or adjustable cushioning. DNC-125-200-PPV-A Part no. 163504 ISO 15552 (ISO 6431, VDMA 24562) Wide range of
-
(Trenutno nema na stanju)
Cena na upit
Festo ISO cylinder to ISO 21287 ADN ; 536203
ADN-12-100-A-P-A ISO cylinder to ISO 21287 for fixed or self-adjusting cushioning with high variance. ISO 21287 Up to 50% less installation space than comparable
-
(Trenutno nema na stanju)
Cena na upit
Festo ISO cylinder DSBC-63-50-PPVA-N3 ; 1383580
ISO 15552 (ISO 6431, VDMA 24562) Self-adjusting pneumatic end-position cushioning which adapts optimally to changes in load and speed Standard profile with two sensor
-
(Trenutno nema na stanju)
Cena na upit