Name: INVERTEK DRIVES Optidrive Coolvert 40kW, 3ph input, heatsink; CV-540750-3FHE
Brand: INVERTEK DRIVES
SKU: CV-540750-3FHE
Availability: OutOfStock

INVERTEK DRIVES Optidrive Coolvert 40kW, 3ph input, heatsink; CV-540750-3FHE

Invertek Drives Optidrive Coolvert 40kW, 75A, 3ph input, heatsink; CV-540750-3FHE...

Brand: INVERTEK DRIVES
Šifra: CV-540750-3FHE
Dostupnost: Proveriti dostupnost

Cena na upit

Invertek Drives Optidrive Coolvert 40kW, 75A, 3ph input, heatsink; CV-540750-3FHE

Technical Specifications

Input Ratings	Supply Voltage	200 – 240V ± 10% 380 – 480V ± 10%
	Supply Frequency	48 – 62Hz
	Displacement Power Factor	> 0.98
	Phase Imbalance	3% Maximum allowed
	Inrush Current	< rated current

Output Ratings	Output Power	200V: 7.0A to 20A 400V: 14A to 75A
	Overload Capacity	130% rated current for 10s
	Output Frequency	0 – 500Hz
	Acceleration Time	0.01 – 600 seconds
	Deceleration Time	0.01 – 600 seconds
	Typical Efficiency	> 98%

Ambient Conditions	Temperature	Storage: −40 to 70°C Operating: −20 to 60°C
	Altitude	Up to 1000m ASL without derating Up to 2000m maximum
	Humidity	95% Max, non condensing
	Vibration	Conforms to EN61800-5-1

Enclosure	Ingress Protection (IP)	Front IP20 Rear (Through Panel Mounting) IP55
Enclosure	Coated PCBs	Designed for operation in 3S2/3C2 environments according to IEC 60721-3-3

Programming	Modbus RTU (RS485)	Modbus RTU on Pluggable terminals and through RJ45 port
	PC Tools	PC Tools software for Diagnostics and parameter configuration (RJ45 port only)
	Keypad	Optional Remote Keypad with TFT display for diagnostic and programming
	Smartphone app	Optitools Mobile

Control Specification	PWM Frequency	4 – 32kHz
	Control Modes	Modbus RTU (RS485) Terminal Control Digital / Analogue Terminal Control PI mode Master / Slave Mode

Safe Torque Off (STO)	IEC 61800-5-2:2016	SIL 3
	UL 61800-5-2 : 2022	SIL 3
	Independent Approval	TUV Rheinland / UL

Maintenance & Diagnostics	Fault Memory	Last 3 trips stored with time stamp
	Data Logging	Logging of data prior to trip for diagnostic purposes
	Monitoring	Hours Run Meter kWH

Conformance	The Coolvert product range conforms to the relevant safety provisions of the following council directives: 2014/30/EU (EMC), 2014/35/EU (LVD), 2006/42/EC (Machinery Directive), 2011/65/EU (RoHS 2) and 2009/125/EC (Eco-design)
	Design and manufacture is in accordance with the following harmonised European standards:
	BSEN 61800-5-1: 2007 & A1: 2017	Adjustable speed electrical power drive systems. Safety requirements. Electrical, thermal and energy.
	BSEN 61800-3:2018	Adjustable speed electrical power drive systems. Part 3: EMC requirements and specific test methods (IEC 61800-3:2017).
	BSEN 61800-9-2:2017	Adjustable speed electrical power drive systems. Part 9-2: Ecodesign for power drive systems, motor starters, power electronics and their driven applications – Energy efficiency indicators for power drive systems and motor starters (IEC 61800-9-2:2017).
	BSEN 60529: 1992 & A2: 2013	Specifications for degrees of protection provided by enclosures
	UL 61800-5-1	cUL Listed cUR Recognised for the coldplate variants
	BSEN 61000-3-12: 2011	Electromagnetic compatibility (EMC) - Part 3-12: Limits - Limits for harmonic currents produced by equipment connected to public low voltage systems with input current >16 A and ≤ 75 A per phase
	BSEN 61000-3-2:2019 (single phase input variants only)	Electromagnetic compatibility (EMC).Limits - Limits for harmonic current emissions (equipment input current ≤16 A per phase)