The TxMini line temperature transmitters with serial communication have compact dimensions and practical connection via M12 connector. These devices are an excellent solution for temperature measurement applications with high precision and can be installed in small spaces. With RS485 serial interface via Modbus-RTU protocol, they are easily integrated into existing networks for communication with PLCs and SCADA systems.

The new TxMini can be configured via DigiConfig software or via Modbus commands. These commands can be generated from a SCADA supervision system.

The PT100 sensor must be soldered to the transmitter board terminals in TxMini-M12-485 and TxMini-485 models or positioned through connectors in TxMini-M12-485-CN and TxMini-485-CN models.

Transmitters can also be supplied without the M12 connector at the output.

- 2-wire RS485 Communication with Modbus-RTU Protocol
- Power Supply: 7 to 40Vdc
- 3-Wire Pt100 Input
- Temperature range: -200 to 600°C
- Typical Accuracy (at 25 °C): 0.1%
- Operating Temperature: -40 to 85 °C
- Free Windows® Configurator Software
- Configurable Value for Sensor Failure


DigiConfig - Software to configure transmitters and gateways
DigiConfig is an easy-to-use software for parameterizing and diagnosing transmitters and gateways with a Modbus RTU serial interface, so that they can later be connected to any supervisory or control system.

The devices are physically connected to the computer via an RS485 network. For this connection, you can use a USB cable, an RS232-RS485 converter or a USB-RS485 converter. The communication protocol used between the computer and equipment is Modbus RTU.
Download software here.