Siemens CPU 1510SP-1 PN, 100KB Prog./750KB Data; 6ES7510-1DJ01-0AB0
SIMATIC DP, CPU 1510SP-1 PN for ET 200SP, Central processing unit with Work memory 100 KB for program and 750 KB for data, 1st interface: PROFINET IRT with 3-port...
Cena bez pdv-a: 90.844,83 |
Cena sa pdv-om: 109.013,79 |
SIMATIC DP, CPU 1510SP-1 PN for ET 200SP, Central processing unit with Work memory 100 KB for program and 750 KB for data, 1st interface: PROFINET IRT with 3-port switch, 72 ns bit performance, SIMATIC Memory Card required, BusAdapter required for Port 1 and 2
|
General information |
||
| Product type designation | CPU 1510SP-1 PN | |
| HW functional status | FS05 | |
| Firmware version | V2.9 | |
| Product function | ||
| ● I&M data | Yes; I&M0 to I&M3 | |
| ● Module swapping during operation (hot swapping) | Yes; Multi-hot swapping | |
| ● Isochronous mode | Yes; Only with PROFINET; with minimum OB 6x cycle of 625 µs | |
| Engineering with | ||
| ● STEP 7 TIA Portal configurable/integrated from version | V17 (FW V2.9) / V13 SP1 Update 4 (FW V1.8) or higher | |
| Configuration control | ||
| via dataset | Yes | |
| Control elements | ||
| Mode selector switch | 1 | |
| Supply voltage | ||
| Rated value (DC) | 24 V | |
| permissible range, lower limit (DC) | 19.2 V | |
| permissible range, upper limit (DC) | 28.8 V | |
| Reverse polarity protection | Yes | |
| Mains buffering | ||
| ● Mains/voltage failure stored energy time | 5 ms | |
| Input current | ||
| Current consumption (rated value) | 0.6 A | |
| Current consumption, max. | 0.9 A | |
| Inrush current, max. | 4.7 A; Rated value | |
| I²t | 0.14 A²·s | |
| Power | ||
| Infeed power to the backplane bus | 8.75 W | |
| Power loss | ||
| Power loss, typ. | 5.6 W | |
| Memory | ||
| Number of slots for SIMATIC memory card | 1 | |
| SIMATIC memory card required | Yes | |
| Work memory | ||
| ● integrated (for program) | 100 kbyte | |
| ● integrated (for data) | 750 kbyte | |
| Load memory | ||
| ● Plug-in (SIMATIC Memory Card), max. | 32 Gbyte | |
| Backup | ||
| ● maintenance-free | Yes | |
| CPU processing times | ||
| for bit operations, typ. | 72 ns | |
| for word operations, typ. | 86 ns | |
| for fixed point arithmetic, typ. | 115 ns | |
| for floating point arithmetic, typ. | 461 ns | |
| CPU-blocks | ||
| Number of elements (total) | 4 000; Blocks (OB, FB, FC, DB) and UDTs | |
| DB | ||
| ● Number range | 1 ... 60 999; subdivided into: number range that can be used by the user: 1 ... 59 999, and number range of DBs created via SFC 86: 60 000 ... 60 999 | |
| ● Size, max. | 750 kbyte; For DBs with absolute addressing, the max. size is 64 KB | |
| FB | ||
| ● Number range | 0 ... 65 535 | |
| ● Size, max. | 100 kbyte | |
| FC | ||
| ● Number range | 0 ... 65 535 | |
| ● Size, max. | 100 kbyte | |
| OB | ||
| ● Size, max. | 100 kbyte | |
| ● Number of free cycle OBs | 100 | |
| ● Number of time alarm OBs | 20 | |
| ● Number of delay alarm OBs | 20 | |
| ● Number of cyclic interrupt OBs | 20; With minimum OB 3x cycle of 500 µs | |
| ● Number of process alarm OBs | 50 | |
| ● Number of DPV1 alarm OBs | 3 | |
| ● Number of isochronous mode OBs | 1 | |
| ● Number of technology synchronous alarm OBs | 2 | |
| ● Number of startup OBs | 100 | |
| ● Number of asynchronous error OBs | 4 | |
| ● Number of synchronous error OBs | 2 | |
| ● Number of diagnostic alarm OBs | 1 | |
| Nesting depth | ||
| ● per priority class | 24 | |
| Counters, timers and their retentivity | ||
| S7 counter | ||
| ● Number | 2 048 | |
| Retentivity | ||
| — adjustable | Yes | |
| IEC counter | ||
| ● Number | Any (only limited by the main memory) | |
| Retentivity | ||
| — adjustable | Yes | |
| S7 times | ||
| ● Number | 2 048 | |
| Retentivity | ||
| — adjustable | Yes | |
| IEC timer | ||
| ● Number | Any (only limited by the main memory) | |
| Retentivity | ||
| — adjustable | Yes | |
| Data areas and their retentivity | ||
| Retentive data area (incl. timers, counters, flags), max. | 128 kbyte; Available retentive memory for bit memories, timers, counters, DBs, and technology data (axes): 88 KB | |
| Flag | ||
| ● Size, max. | 16 kbyte | |
| ● Number of clock memories | 8; 8 clock memory bit, grouped into one clock memory byte | |
| Data blocks | ||
| ● Retentivity adjustable | Yes | |
| ● Retentivity preset | No | |
| Local data | ||
| ● per priority class, max. | 64 kbyte; max. 16 KB per block | |
| Address area | ||
| Number of IO modules | 1 024; max. number of modules / submodules | |
| I/O address area | ||
| ● Inputs | 32 kbyte; All inputs are in the process image | |
| ● Outputs | 32 kbyte; All outputs are in the process image | |
| per integrated IO subsystem | ||
| — Inputs (volume) | 8 kbyte | |
| — Outputs (volume) | 8 kbyte | |
| per CM/CP | ||
| — Inputs (volume) | 8 kbyte | |
| — Outputs (volume) | 8 kbyte | |
| Subprocess images | ||
| ● Number of subprocess images, max. | 32 | |
| Address space per module | ||
| ● Address space per module, max. | 288 byte; For input and output data respectively | |
| Address space per station | ||
| ● Address space per station, max. | 2 560 byte; for central inputs and outputs; depending on configuration; 2 048 bytes for ET 200SP modules + 512 bytes for ET 200AL modules | |
| Hardware configuration | ||
| Number of distributed IO systems | 32; A distributed I/O system is characterized not only by the integration of distributed I/O via PROFINET or PROFIBUS communication modules, but also by the connection of I/O via AS-i master modules or links (e.g. IE/PB-Link) | |
| Number of DP masters | ||
| ● Via CM | 1 | |
| Number of IO Controllers | ||
| ● integrated | 1 | |
| ● Via CM | 0 | |
| Rack | ||
| ● Modules per rack, max. | 80; CPU + 64 modules + server module (mounting width max. 1 m) + 16 ET 200AL modules | |
| ● Quantity of operable ET 200SP modules, max. | 64 | |
| ● Quantity of operable ET 200AL modules, max. | 16 | |
| ● Number of lines, max. | 1 | |
| PtP CM | ||
| ● Number of PtP CMs | the number of connectable PtP CMs is only limited by the number of available slots | |
| Time of day | ||
| Clock | ||
| ● Type | Hardware clock | |
| ● Backup time | 6 wk; At 40 °C ambient temperature, typically | |
| ● Deviation per day, max. | 10 s; Typ.: 2 s | |
| Operating hours counter | ||
| ● Number | 16 | |
| Clock synchronization | ||
| ● supported | Yes | |
| ● to DP, master | Yes; Via CM DP module | |
| ● to DP, slave | Yes; Via CM DP module | |
| ● in AS, master | Yes | |
| ● in AS, slave | Yes | |
| ● on Ethernet via NTP | Yes | |
| Interfaces | ||
| Number of PROFINET interfaces | 1 | |
| Number of PROFIBUS interfaces | 1; Via CM DP module | |
| Optical interface | No | |
| 1. Interface | ||
| Interface types | ||
| ● RJ 45 (Ethernet) | Yes; X1 P3; opt. X1 P1 and X1 P2 via BusAdapter BA 2x RJ45 | |
| ● Number of ports | 3; 1. integr. + 2. via BusAdapter | |
| ● integrated switch | Yes | |
| ● BusAdapter (PROFINET) | Yes; compatible BusAdapters: BA 2x RJ45, BA 2x FC, BA 2x M12 | |
| Protocols | ||
| ● IP protocol | Yes; IPv4 | |
| ● PROFINET IO Controller | Yes | |
| ● PROFINET IO Device | Yes | |
| ● SIMATIC communication | Yes | |
| ● Open IE communication | Yes; Optionally also encrypted | |
| ● Web server | Yes | |
| ● Media redundancy | Yes; MRP Automanager according to IEC 62439-2 Edition 2.0 | |
| PROFINET IO Controller | ||
| Services | ||
| — PG/OP communication | Yes | |
| — Isochronous mode | Yes | |
| — Direct data exchange | Yes; Requirement: IRT and isochronous mode (MRPD optional) | |
| — IRT | Yes | |
| — PROFIenergy | Yes; per user program | |
| — Prioritized startup | Yes; Max. 32 PROFINET devices | |
| — Number of connectable IO Devices, max. | 64; In total, up to 256 distributed I/O devices can be connected via AS-i, PROFIBUS or PROFINET | |
| — Of which IO devices with IRT, max. | 64 | |
| — Number of connectable IO Devices for RT, max. | 64 | |
| — of which in line, max. | 64 | |
| — Number of IO Devices that can be simultaneously activated/deactivated, max. | 8; in total across all interfaces | |
| — Number of IO Devices per tool, max. | 8 | |
| — Updating times | The minimum value of the update time also depends on communication share set for PROFINET IO, on the number of IO devices, and on the quantity of configured user data | |
| Update time for IRT | ||
| — for send cycle of 250 µs | 250 μs to 4 ms; Note: In the case of IRT with isochronous mode, the minimum update time of 625 µs of the isochronous OB is decisive | |
| — for send cycle of 500 µs | 500 μs to 8 ms; Note: In the case of IRT with isochronous mode, the minimum update time of 625 µs of the isochronous OB is decisive | |
| — for send cycle of 1 ms | 1 ms to 16 ms | |
| — for send cycle of 2 ms | 2 ms to 32 ms | |
| — for send cycle of 4 ms | 4 ms to 64 ms | |
| — With IRT and parameterization of "odd" send cycles | Update time = set "odd" send clock (any multiple of 125 µs: 375 µs, 625 µs ... 3 875 µs) | |
| Update time for RT | ||
| — for send cycle of 250 µs | 250 µs to 128 ms | |
| — for send cycle of 500 µs | 500 µs to 256 ms | |
| — for send cycle of 1 ms | 1 ms to 512 ms | |
| — for send cycle of 2 ms | 2 ms to 512 ms | |
| — for send cycle of 4 ms | 4 ms to 512 ms | |
| PROFINET IO Device | ||
| Services | ||
| — PG/OP communication | Yes | |
| — Isochronous mode | No | |
| — IRT | Yes | |
| — PROFIenergy | Yes; per user program | |
| — Shared device | Yes | |
| — Number of IO Controllers with shared device, max. | 4 | |
| — activation/deactivation of I-devices | Yes; per user program | |
| — Asset management record | Yes; per user program | |
| 2. Interface | ||
| Interface types | ||
| ● RS 485 | Yes; Via CM DP module | |
| ● Number of ports | 1 | |
| Protocols | ||
| ● PROFIBUS DP master | Yes | |
| ● PROFIBUS DP slave | Yes | |
| ● SIMATIC communication | Yes | |
| PROFIBUS DP master | ||
| ● Number of connections, max. | 48; Of which 4 each reserved for ES and HMI | |
| ● Number of DP slaves, max. | 125; In total, up to 256 distributed I/O devices can be connected via AS-i, PROFIBUS or PROFINET | |
| Services | ||
| — PG/OP communication | Yes | |
| — Equidistance | No | |
| — Isochronous mode | No | |
| — Activation/deactivation of DP slaves | Yes | |
| Interface types | ||
| RJ 45 (Ethernet) | ||
| ● 100 Mbps | Yes | |
| ● Autonegotiation | Yes | |
| ● Autocrossing | Yes | |
| ● Industrial Ethernet status LED | Yes | |
| RS 485 | ||
| ● Transmission rate, max. | 12 Mbit/s | |
| Protocols | ||
| PROFIsafe | No | |
| Number of connections | ||
| ● Number of connections, max. | 96; via integrated interfaces of the CPU and connected CPs / CMs | |
| ● Number of connections reserved for ES/HMI/web | 10 | |
| ● Number of connections via integrated interfaces | 64 | |
| ● Number of connections per CP/CM | 32 | |
| ● Number of S7 routing paths | 16 | |
| Redundancy mode | ||
| ● H-Sync forwarding | Yes | |
| Media redundancy | ||
| — Media redundancy | Yes; only via BusAdapter | |
| — MRP | Yes; MRP Automanager according to IEC 62439-2 Edition 2.0, MRP Manager; MRP Client | |
| — MRP interconnection, supported | Yes; as MRP ring node according to IEC 62439-2 Edition 3.0 | |
| — MRPD | Yes; Requirement: IRT | |
| — Switchover time on line break, typ. | 200 ms; For MRP, bumpless for MRPD | |
| — Number of stations in the ring, max. | 50 | |
| SIMATIC communication | ||
| ● PG/OP communication | Yes; encryption with TLS V1.3 pre-selected | |
| ● S7 routing | Yes | |
| ● Data record routing | Yes | |
| ● S7 communication, as server | Yes | |
| ● S7 communication, as client | Yes | |
| ● User data per job, max. | See online help (S7 communication, user data size) | |
| Open IE communication | ||
| ● TCP/IP | Yes | |
| — Data length, max. | 64 kbyte | |
| — several passive connections per port, supported | Yes | |
| ● ISO-on-TCP (RFC1006) | Yes | |
| — Data length, max. | 64 kbyte | |
| ● UDP | Yes | |
| — Data length, max. | 2 kbyte; 1 472 bytes for UDP broadcast | |
| — UDP multicast | Yes; Max. 5 multicast circuits | |
| ● DHCP | Yes | |
| ● DNS | Yes | |
| ● SNMP | Yes | |
| ● DCP | Yes | |
| ● LLDP | Yes | |
| ● Encryption | Yes; Optional | |
| Web server | ||
| ● HTTP | Yes; Standard and user pages | |
| ● HTTPS | Yes; Standard and user pages | |
| OPC UA | ||
| ● Runtime license required | Yes; "Small" license required | |
| ● OPC UA Client | Yes | |
| — Application authentication | Yes | |
| — Security policies | Available security policies: None, Basic128Rsa15, Basic256Rsa15, Basic256Sha256 | |
| — User authentication | "anonymous" or by user name & password | |
| — Number of connections, max. | 4 | |
| — number of nodes of the client interfaces, recommended max. | 1 000 | |
| — Number of elements for one call of OPC_UA_NodeGetHandleList/OPC_UA_ReadList/OPC_UA_WriteList, max. | 300 | |
| — Number of elements for one call of OPC_UA_NameSpaceGetIndexList, max. | 20 | |
| — Number of elements for one call of OPC_UA_MethodGetHandleList, max. | 100 | |
| — number of simultaneous calls of the client instructions for session management, per connection, max. | 1 | |
| — number of simultaneous calls of the client instructions for data access, per connection, max. | 5 | |
Slicni proizvodi:
Siemens CPU1510SP F-1 PN, 150KB Prog./750KB Data; 6ES7510-1SJ01-0AB0
SIMATIC DP, CPU 1510SP F-1 PN for ET 200SP, Central processing unit with Work memory 150 KB for program and 750 KB for data, 1st interface: PROFINET IRT with 3-port
-
(Trenutno nema na stanju)
Cena na upit
Siemens CPU 1512SP F-1 PN, 300KB Prog./1MB Data; 6ES7512-1SK01-0AB0
SIMATIC DP, CPU 1512SP F-1 PN for ET 200SP, Central processing unit with Work memory 300 KB for program and 1 MB for data, 1st interface: PROFINET IRT with 3-port
-
(Trenutno nema na stanju)
Cena na upit
Siemens CPU 1512SP-1 PN, 200KB Prog./1MB Data; 6ES7512-1DK01-0AB0
SIMATIC DP, CPU 1512SP-1 PN for ET 200SP, Central processing unit with Work memory 200 KB for program and 1 MB for data, 1st interface: PROFINET IRT with 3-port
-
(Na stanju)
115.952,01
Siemens CPU 1516F-3 PN/DP, 1,5MB Prog, 5MB Data; 6ES7516-3FN02-0AB0
SIMATIC S7-1500F, CPU 1516F-3 PN/DP, central processing unit with 1.5 MB work memory for program and 5 MB for data, 1st interface: PROFINET IRT with 2-port switch,
-
(Trenutno nema na stanju)
Cena na upit
Siemens SIMATIC S7-1500, CPU 1511-1PN, 150KB Program, 1MB Data; 6ES7511-1AK02-0AB0
SIMATIC S7-1500, CPU 1511-1 PN, Central processing unit with working memory 150 KB for program and 1 MB for data, 1. interface: PROFINET IRT with 2 port switch,
-
(Trenutno nema na stanju)
95.751,99
Siemens CPU 1512SP-1 PN, 200KB Prog./1MB Data; 6ES7512-1DK01-0AB0
SIMATIC DP, CPU 1512SP-1 PN for ET 200SP, Central processing unit with Work memory 200 KB for program and 1 MB for data, 1st interface: PROFINET IRT with 3-port
-
(Na stanju)
115.952,01