Name: Siemens ET 200SP, DI 4x 120..230VvAC ST; 6ES7131-6FD01-0BB1
Brand: Siemens
SKU: 6ES7131-6FD01-0BB1
Availability: OutOfStock

0 Uporedi proizvode

0 Pogledaj korpu

011 257 1922

Siemens ET 200SP, DI 4x 120..230VvAC ST; 6ES7131-6FD01-0BB1

SIMATIC ET 200SP, Digital input module, DI 4x 120..230V AC Standard, type 3 (IEC 61131), Packing unit: 1 piece, fits to BU-type B1, Colour Code CC41, module dia...

Brand: Siemens
Šifra: 6ES7131-6FD01-0BB1
Dostupnost: Proveriti dostupnost

Cena na upit

Opis
Specifikacija

SIMATIC ET 200SP, Digital input module, DI 4x 120..230V AC Standard, type 3 (IEC 61131), Packing unit: 1 piece, fits to BU-type B1, Colour Code CC41, module diagnostics

General information
Product type designation		DI 4x120 ... 230 V AC ST
HW functional status		From FS02
Firmware version		V0.0
● FW update possible		No
usable BaseUnits		BU type B1
Color code for module-specific color identification plate		CC41
Product function
● I&M data		Yes; I&M0 to I&M3
● Isochronous mode		No
Engineering with
● STEP 7 TIA Portal configurable/integrated from version		V14
● STEP 7 configurable/integrated from version		V5.5 SP3
● PROFIBUS from GSD version/GSD revision		One GSD file each, Revision 3 and 5 and higher
● PROFINET from GSD version/GSD revision		GSDML V2.3
Operating mode
● DI		Yes
● Counter		No
● Oversampling		No
● MSI		No
Supply voltage
Rated value (AC)		230 V
permissible range, lower limit (AC)		187 V
permissible range, upper limit (AC)		264 V
Reverse polarity protection		No
Input current
Current consumption (rated value)		10 mA
Encoder supply
Number of outputs		4
Short-circuit protection		No; when using BU type B1, a fuse with 10 A tripping current must be provided
Output current
● up to 60 °C, max.		10 A
Power loss
Power loss, typ.		1 W; Active power, load voltage 230 V, all inputs connected with 230 V, 50 Hz
Address area
Address space per module
● Inputs		1 byte; + 1 byte for QI information
Hardware configuration
Automatic encoding		Yes
● Mechanical coding element		Yes
● Type of mechanical coding element		type C
Selection of BaseUnit for connection variants
● 1-wire connection		BU type B1
● 2-wire connection		BU type B1
● 3-wire connection		BU type B1
● 4-wire connection		BU type B1 + potential distributor module
Digital inputs
Number of digital inputs		4
Input characteristic curve in accordance with IEC 61131, type 3		Yes
Input voltage
● Rated value (AC)		230 V
● for signal "0"		0V AC to 40V AC
● for signal "1"		74 V AC to 264 V AC
Input current
● for signal "1", typ.		10.8 mA
Input delay (for rated value of input voltage)
for standard inputs
— parameterizable		No
— at "0" to "1", min.		1.5 ms
— at "0" to "1", max.		4 ms
— at "1" to "0", min.		10 ms
— at "1" to "0", max.		10 ms
Cable length
● shielded, max.		1 000 m
● unshielded, max.		600 m
Encoder
Connectable encoders
● 2-wire sensor		Yes
Interrupts/diagnostics/status information
Alarms
● Diagnostic alarm		No
● Hardware interrupt		No
Diagnoses
● Monitoring the supply voltage		No
● Wire-break		No

Slicni proizvodi:

Siemens ET 200SP, DI 8x24VDC High Speed; 6ES7131-6BF00-0DA0

SIMATIC ET 200SP, digital input module, DI 8x 24 V DC High Speed, Pack quantity: 1 unit, three alternative operating modes: DI, Oversampling, 4x counters, suitable

(Trenutno nema na stanju)

Cena na upit

Siemens ET 200SP, DI 8x 24VAC..48VUC BA, PU 1; 6ES7131-6CF00-0AU0

SIMATIC ET 200SP, digital input module, DI 8x 24 V AC..48 V UC Basic, packing quantity: 1 unit, suitable for BU type U0, color code CC20, module diagnostics

(Trenutno nema na stanju)

Cena na upit

Siemens ET 200SP, El-Mod., F-DI 8x24VDC HF; 6ES7136-6BA00-0CA0

SIMATIC DP, Electronics module for ET 200SP, F-DI 8x 24 V DC HF, 15 mm width, up to PL E (ISO 13849-1)/ SIL3 (IEC 61508)

(Trenutno nema na stanju)

Cena na upit

Siemens ET 200SP, El-Mod., F-DI 8x24VDC HF; 6ES7136-6BA01-0CA0

SIMATIC DP, electronic module for ET 200SP, F-DI 8x 24 V DC HF, 15 mm width, up to PLe (ISO 13849-1)/ SIL3 (IEC 61508)

(Trenutno nema na stanju)

Cena na upit

Siemens ET 200SP, DI 8x 24V DC SRC BA; 6ES7131-6BF61-0AA0

SIMATIC ET 200SP, Digital input module, DI 8x 24V DC SRC BA, type 1 (IEC 61131), source Input (NPN, M-reading) Packing unit: 1 piece, fits to BU-type A0, Colour

(Trenutno nema na stanju)

Cena na upit

Siemens ET 200SP, DI 8x24VDC HF, PU 1; 6ES7131-6BF00-0CA0

SIMATIC ET 200SP, digital input module, DI 8x 24 V DC High Feature, input type 3 (IEC 61131), sink input, (PNP, sink input) Packing unit: 1 unit, suitable for BU

(Trenutno nema na stanju)

Cena na upit