Siemens ET 200SP, DQ 4x24..230VAC/2A HF, PU 1; 6ES7132-6FD00-0CU0
SIMATIC ET 200SP, digital output module DQ 4x 24..230V AC/2A HF packaging unit: 1 piece, two alternative modes: DQ and power control, fits to BU-Type U0, color code...
Cena na upit
| SIMATIC ET 200SP, digital output module DQ 4x 24..230V AC/2A HF packaging unit: 1 piece, two alternative modes: DQ and power control, fits to BU-Type U0, color code CC20, channel diagnosis |
| General information | |
| Product type designation | DQ 4x24 ... 230 V AC/2 A HF |
| HW functional status | From FS03 |
| Firmware version | |
| ● FW update possible | Yes |
| usable BaseUnits | BU type U0 |
| Color code for module-specific color identification plate | CC20 |
| Product function | |
| ● I&M data | Yes; I&M0 to I&M3 |
| ● Isochronous mode | No |
| Engineering with | |
| ● STEP 7 TIA Portal configurable/integrated from version | V14 |
| ● STEP 7 configurable/integrated from version | STEP 7 V5.5 or higher |
| ● PROFIBUS from GSD version/GSD revision | GSD as of Revision 5 |
| ● PROFINET from GSD version/GSD revision | GSDML V2.3 |
| Operating mode | |
| ● DQ | Yes |
| ● DQ with energy-saving function | Yes |
| ● PWM | No |
| ● Oversampling | No |
| ● MSO | No |
| ● Phase control | Yes; Control area: 8.5 ... 100% of the phase angle |
| ● Trailing-edge phase | No |
| ● Half-wave | Yes |
| ● Full-wave | Yes |
| Supply voltage | |
| Rated value (AC) | 230 V; 47 ... 63 Hz, max. rate of change of frequency 1 mHz/s |
| permissible range, lower limit (AC) | 20.4 V |
| permissible range, upper limit (AC) | 264 V |
| Input current | |
| Current consumption (rated value) | 8 mA; without load |
| output voltage / header | |
| Rated value (AC) | 230 V; 24V AC to 230V AC |
| Power loss | |
| Power loss, typ. | 9 W; Active power, load voltage 230 V, all outputs loaded with 2 A, 50 Hz |
| Address area | |
| Address space per module | |
| ● Inputs | + 1 byte for QI information |
| ● Outputs | 8 byte |
| Hardware configuration | |
| Automatic encoding | Yes |
| ● Mechanical coding element | Yes |
| ● Type of mechanical coding element | type C |
| Selection of BaseUnit for connection variants | |
| ● 1-wire connection | BU type U0 |
| ● 2-wire connection | BU type U0 |
| ● 3-wire connection | BU type U0 + Potential distributor module |
| Digital outputs | |
| Type of digital output | Triac |
| Number of digital outputs | 4 |
| Current-sinking | No |
| Current-sourcing | Yes |
| Digital outputs, parameterizable | Yes |
| Short-circuit protection | No; external fusing necessary |
| Open-circuit detection | Yes; channel by channel |
| ● Response threshold, typ. | 1 mA; 40 V AC or more |
| Overload protection | No; A miniature fuse with 10 tripping current and tripping characteristic "quick response" must be provided in the module supply |
| Controlling a digital input | Yes |
| Switching capacity of the outputs | |
| ● with resistive load, max. | 2 A; Max. 4 A, see additional description in manual |
| ● with inductive load, max. | 2 A |
| ● on lamp load, max. | 100 W; Tungsten rating in accordance with UL; for thermistors with higher power ratings, see the notes in the manual |
| Output voltage | |
| ● for signal "1", min. | 20.4 V |
| Output current | |
| ● for signal "1" rated value | 2 A |
| ● for signal "1" permissible range, min. | 10 mA |
| ● for signal "1" permissible range, max. | 4 A; note derating data in the manual |
| ● for signal "0" residual current, max. | 3 mA |
| Output delay with resistive load | |
| ● "0" to "1", max. | 40 ms; 2 AC cycles |
| ● "1" to "0", max. | 20 ms; 1 AC cycle |
Slicni proizvodi:
Siemens ET 200SP, DQ 4x24VDC/2A ST; 6ES7132-6BD20-0BA0
SIMATIC ET 200SP, digital output module, DQ 4x 24VDC/2A Standard, suitable for BU type A0, Color code CC02, Module diagnostics
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP, RQ COni 3x120VDC.230VAC/5A ST; 6ES7132-6HC70-0BU0
SIMATIC ET 200SP, relay module, RQ COni 3x120VDC..230VAC/5A ST, 3 CO contacts non-isolated contacts, packing unit: 1 unit, suitable for BU type U0, color code CC20,
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP, F-RQ 1x24VDC/24..230VAC/5A ST; 6ES7136-6RA00-0BF0
SIMATIC DP, Electronics module f. ET200SP, F-RQ 1x 24 V DC/24..230VAC/5A ST, 20 mm overall width, 1 relay output (2 NO) Summation output current 5 A, load voltage
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP, DQ 8x 24VDC/0,5A SINK BA, PU 1; 6ES7132-6BF61-0AA0
SIMATIC ET 200SP, Digital output module, DQ 8x 24V DC/0,5A Sink Basic, Sink output (NPN, M-switching), Packing unit: 1 piece, fits to BU-type A0, Colour Code CC01,
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP HA, EX-DQ 2x17,4VDC/27MA; 6DL1132-6CB00-0HX1
SIMATIC ET 200SP HA, ET 200SP, digital ex-i output module, Ex-DQ 2x17,4VDC/27mA suitable for BaseUnit type X1, channel diagnostics
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP, DQ 8x 24V DC/0,5A Basic, PU 1; 6ES7132-6BF01-0AA0
SIMATIC ET 200SP, Digital output module, DQ 8x 24V DC/0,5A Basic, Source output (PNP,P-switching) Packing unit: 1 piece, fits to BU-type A0, Colour Code CC02, substitute
-
(Trenutno nema na stanju)
Cena na upit