General information
Product type designation
DQ 8x24VDC/0,5A SNK BA
HW functional status
From FS02
Firmware version
V0.0
● FW update possible
No
usable BaseUnits
BU type A0
Color code for module-specific color identification plate
CC01
Product function
● I&M data
Yes; I&M0 to I&M3
● Isochronous mode
No
Engineering with
● STEP 7 TIA Portal configurable/integrated from version
V14
● STEP 7 configurable/integrated from version
V5.5 SP3
● PROFIBUS from GSD version/GSD revision
One GSD file each, Revision 3 and 5 and higher
● PROFINET from GSD version/GSD revision
GSDML V2.3
Operating mode
● DQ
Yes
● DQ with energy-saving function
No
● PWM
No
● Oversampling
No
● MSO
No
Redundancy
● Redundancy capability
Yes
Supply voltage
Rated value (DC)
24 V
permissible range, lower limit (DC)
19.2 V
permissible range, upper limit (DC)
28.8 V
output voltage / header
Rated value (DC)
24 V
Power loss
Power loss, typ.
1.5 W
Address area
Address space per module
● Outputs
1 byte
Hardware configuration
Automatic encoding
Yes
● Mechanical coding element
Yes
● Type of mechanical coding element
type B
Digital outputs
Type of digital output
Source output (PNP, current-sourcing)
Number of digital outputs
8
Current-sinking
Yes
Digital outputs, parameterizable
Yes
Short-circuit protection
Yes
● Response threshold, typ.
1.5 A
Limitation of inductive shutdown voltage to
Typ. 47 V
Controlling a digital input
Yes
Switching capacity of the outputs
● with resistive load, max.
0.5 A
● on lamp load, max.
5 W
Load resistance range
● lower limit
48 Ω
● upper limit
3 400 Ω
Output current
● for signal "1" rated value
0.5 A
● for signal "1" permissible range, max.
0.5 A
● for signal "0" residual current, max.
5 µA
Output delay with resistive load
● "0" to "1", max.
300 µs
● "1" to "0", max.
600 µs
Parallel switching of two outputs
● for uprating
No
● for redundant control of a load
Yes
Switching frequency
● with resistive load, max.
100 Hz
● with inductive load, max.
0.5 Hz
● on lamp load, max.
10 Hz
Total current of the outputs
● Current per channel, max.
0.5 A
● Current per module, max.
4 A
Total current of the outputs (per module)
horizontal installation
— up to 60 °C, max.
4 A
vertical installation
— up to 50 °C, max.
4 A
Slicni proizvodi:
SIMATIC DP, Electronics module for ET 200SP, F-DQ 4X24 V DC/2A, 15 mm width, up to PL E (ISO 13849) up to SIL 3 (IEC 61508)
-
(Trenutno nema na stanju)
Cena na upit
SIMATIC DP, Electronics module ET 200SP, F-DQ 8XDC 24V0.5A PP, 15 mm width, up to PL E (ISO 13849) up to SIL 3 (IEC 61508)
-
(Trenutno nema na stanju)
Cena na upit
SIMATIC ET 200SP, digital output module, DQ 4x 24..230V AC/2A Standard suitable for BU type B1, Color code CC41, Module diagnostics
-
(Trenutno nema na stanju)
Cena na upit
SIMATIC ET 200SP, Signal relay module, RQ CO 4x 24V DC/2A ST, 4 changeover contacts, isolated contacts, packing unit: 1 piece, fits to BU-type A0, Colour Code CC00,
-
(Trenutno nema na stanju)
Cena na upit
SIMATIC ET 200SP, Relay module, RQ NO 4x 120V DC..230VAC/5A ST. 4 normally open contacts, isolated contacts, packing unit: 1 piece, fits to BU-type B0 and B1, Colour
-
(Trenutno nema na stanju)
Cena na upit
SIMATIC ET 200SP, relay module normally open, RQ NO-MA4x120VDC..230VAC/5A ST, with manual operation, packing unit VPE 1, suitable for BU type B0 or B1, Module d
-
(Trenutno nema na stanju)
Cena na upit
Uporedi proizvode
Ukloni sve proizvode
