Name: Siemens ET 200SP HA, Ex-PM E POWER MODULE; 6DL1133-6PX00-0HW0
Brand: Siemens
SKU: 6DL1133-6PX00-0HW0
Availability: OutOfStock

0 Uporedi proizvode

0 Pogledaj korpu

011 257 1922

Siemens ET 200SP HA, Ex-PM E POWER MODULE; 6DL1133-6PX00-0HW0

SIMATIC ET 200SP HA, ET 200SP, Power module Ex-PM E, 24V 0.8A, WxH: 50mm x 117mm, suitable for BaseUnit type W0...

Brand: Siemens
Šifra: 6DL1133-6PX00-0HW0
Dostupnost: Proveriti dostupnost

Cena na upit

Opis
Specifikacija

SIMATIC ET 200SP HA, ET 200SP, Power module Ex-PM E, 24V 0.8A, WxH: 50mm x 117mm, suitable for BaseUnit type W0

General information
Product type designation		Ex-PM-E
usable BaseUnits		BU type W0
Product function
● I&M data		Yes; Asset data
Supply voltage
Rated value (DC)		24 V
permissible range, lower limit (DC)		19.2 V
permissible range, upper limit (DC)		28.8 V
Reverse polarity protection		Yes
Input current
Current consumption, max.		1.4 A
from load voltage L+ (without load), max.		50 mA
output voltage / header
Rated value (DC)		24 V
Overvoltage protection		Yes
Output current
horizontal installation
● up to 60 °C, max.		0.8 A
● up to 70 °C, max.		0.6 A
vertical installation
● up to 50 °C, max.		0.8 A
● up to 60 °C, max.		0.6 A
Power
Power available from the backplane bus		100 mW
Power loss
Power loss, typ.		4.8 W
Interrupts/diagnostics/status information
Diagnostics function		Yes
Diagnoses
● Diagnostic information readable		Yes
● missing load voltage		Yes
Diagnostics indication LED
● MAINT LED		Yes; Yellow LED
● Monitoring of the supply voltage (PWR-LED)		Yes; green PWR LED
● for module diagnostics		Yes; green/red DIAG LED
Ex(i) characteristics
Module for Ex(i) protection		Yes
maximum values for connecting terminals for gas group IIC
● Um (voltage at non-intrinsically safe connecting terminals), max.		60 V; power supply and backplane bus
Potential separation
primary/secondary		Yes
Isolation
Isolation tested with		further information on insulation can be found in the "ET 200SP HA / ET 200SP modules for devices in hazardous areas” System Manual
Ambient conditions
Ambient temperature during operation
● min.		-40 °C
● max.		70 °C; with derating
Altitude during operation relating to sea level
● Installation altitude above sea level, max.		2 000 m
Dimensions
Width		50 mm
Height		114 mm
Depth		67.5 mm
Weights
Weight, approx.		182 g
last modified:		6/1/2021

Slicni proizvodi:

Siemens ET 200SP, Powermod. F-PM-E PPM, 24V DC; 6ES7136-6PA00-0BC0

SIMATIC DP, POWER M. F-PM-E PPM PROFIsafe, for ET 200SP; 24 V DC safe shutdown of DQ and F-DQ up to PL D/SIL2 or PL E/SIL3 2 for safe dig. inputs 1 for safe dig.

(Trenutno nema na stanju)

Cena na upit

Siemens ET 200SP, F-AI 4xU 0..10V HF; 6ES7136-6AB00-0CA1

SIMATIC DP, electronics module ET 200SP, F-AI 4xU 0..10V HF, fail-safe analog inputs, up to PL E (ISO 13849), up to SIL 3 (IEC 61508)

(Trenutno nema na stanju)

Cena na upit

Siemens ET 200SP, RQ NO 4x 120VDC..230VAC/5A,PU1; 6ES7132-6HD01-0BB1

SIMATIC ET 200SP, Relay module, RQ NO 4x 120V DC..230VAC/5A ST. 4 normally open contacts, isolated contacts, packing unit: 1 piece, fits to BU-type B0 and B1, Colour

(Trenutno nema na stanju)

Cena na upit