Siemens ET 200SP, RQ COni 3x120VDC.230VAC/5A ST; 6ES7132-6HC70-0BU0
Siemens ET 200SP, RQ COni 3x120VDC.230VAC/5A ST; 6ES7132-6HC70-0BU0
SIMATIC ET 200SP, relay module, RQ COni 3x120VDC..230VAC/5A ST, 3 CO contacts non-isolated contacts, packing unit: 1 unit, suitable for BU type U0, color code CC20,...
SIMATIC ET 200SP, relay module, RQ COni 3x120VDC..230VAC/5A ST, 3 CO contacts non-isolated contacts, packing unit: 1 unit, suitable for BU type U0, color code CC20, substitute value output, module diagnostics for supply voltage
General information
Product type designation
RQ 3x120VDC-230VAC/5A CO n.i. ST
Firmware version
V0.0
● FW update possible
No
usable BaseUnits
BU type U0
Color code for module-specific color identification plate
CC20
Product function
● I&M data
Yes; I&M0 to I&M3
● Isochronous mode
No
Redundancy
● Redundancy capability
Yes
Supply voltage
Rated value (DC)
24 V
permissible range, lower limit (DC)
19.2 V
permissible range, upper limit (DC)
28.8 V
Reverse polarity protection
Yes
Input current
Current consumption (rated value)
55 mA; without load
output voltage / header
Rated value (AC)
230 V
Power loss
Power loss, typ.
1.4 W
Address area
Address space per module
● Inputs
+ 1 byte for QI information
● Outputs
1 byte
Hardware configuration
Automatic encoding
Yes
● Mechanical coding element
Yes
● Type of mechanical coding element
type C
Selection of BaseUnit for connection variants
● 2-wire connection
BU type U0
● 3-wire connection
BU type U0
Digital outputs
Type of digital output
Relays
Number of digital outputs
3
Current-sinking
Yes
Current-sourcing
Yes
Digital outputs, parameterizable
Yes
Short-circuit protection
No
Switching capacity of the outputs
● with resistive load, max.
5 A; see additional description in the manual
● with inductive load, max.
2 A; see additional description in the manual
Parallel switching of two outputs
● for logic links
Yes
● for uprating
No
● for redundant control of a load
Yes
Switching frequency
● with resistive load, max.
2 Hz
● with inductive load, max.
0.5 Hz
● on lamp load, max.
2 Hz
Total current of the outputs
● Current per channel, max.
5 A
● Current per module, max.
5 A
Total current of the outputs (per module)
horizontal installation
— up to 50 °C, max.
5 A
— up to 60 °C, max.
5 A
vertical installation
— up to 40 °C, max.
5 A
— up to 50 °C, max.
5 A
Relay outputs
● Number of relay outputs
3; Changeover contact, non-floating
● Rated supply voltage of relay coil L+ (DC)
24 V
● Current consumption of relays (coil current of all relays), max.
40 mA
● external protection for relay outputs
yes, with miniature fuse max. 6.3 A tripping current, quick-response tripping characteristic and 1 500 A breaking capacity
● Number of operating cycles, max.
1 000 000; see additional description in the manual
SIMATIC DP, Electronics module f. ET200SP, F-RQ 1x 24 V DC/24..230VAC/5A ST, 20 mm overall width, 1 relay output (2 NO) Summation output current 5 A, load voltage
SIMATIC ET 200SP, digital output module DQ 4x 24..230V AC/2A HF packaging unit: 1 piece, two alternative modes: DQ and power control, fits to BU-Type U0, color code
