Siemens ET 200SP TM SIWAREX WP351 HF; 7MH4138-6BA00-0CU0
SIMATIC ET 200SP, TM SIWAREX WP351 HF, verifiable weighing module for automatic dosing-, filling-, checking- and totalizing scales, 3xDI, 3xDQ, 1xCI,1xRS485, 1xEthernet,...
Cena na upit
| SIMATIC ET 200SP, TM SIWAREX WP351 HF, verifiable weighing module for automatic dosing-, filling-, checking- and totalizing scales, 3xDI, 3xDQ, 1xCI,1xRS485, 1xEthernet, 1x LC (1-4mV/V) |
| General information | |
| Product type designation | TM SIWAREX WP351 HF |
| HW functional status | 1 |
| Firmware version | V1.0 |
| ● FW update possible | Yes |
| usable BaseUnits | BU type U0 |
| Color code for module-specific color identification plate | CC00 |
| Product function | |
| ● I&M data | Yes; I&M0 to I&M3 |
| ● Isochronous mode | No |
| ● Adjustment of measuring range | Yes; ±0 ... 4 mV/V |
| Engineering with | |
| ● STEP 7 TIA Portal configurable/integrated from version | V15.1 |
| ● STEP 7 configurable/integrated from version | - / - |
| ● PROFIBUS from GSD version/GSD revision | GSD as of Revision 5 |
| ● PROFINET from GSD version/GSD revision | GSDML V2.34 |
| Supply voltage | |
| Load voltage L+ | |
| ● Rated value (DC) | 24 V |
| ● permissible range, lower limit (DC) | 19.2 V |
| ● permissible range, upper limit (DC) | 28.8 V |
| ● Short-circuit protection | Yes |
| ● Reverse polarity protection | Yes |
| Input current | |
| Current consumption, max. | 140 mA; Without DQ |
| Power | |
| Power available from the backplane bus | 94.5 mW |
| Power loss | |
| Power loss, typ. | 1.7 W |
| Address area | |
| Address space per module | |
| ● Inputs | 32 byte |
| ● Outputs | 32 byte |
| Hardware configuration | |
| Automatic encoding | Yes |
| ● Mechanical coding element | Yes |
| ● Type of mechanical coding element | type B |
| Digital inputs | |
| Number of digital inputs | 3 |
| Digital inputs, parameterizable | Yes |
| Input characteristic curve in accordance with IEC 61131, type 3 | Yes |
| Input voltage | |
| ● Type of input voltage | 24 V DC |
| ● Rated value (DC) | 24 V |
| ● for signal "0" | < 5 V DC |
| ● for signal "1" | +11 to +30V |
| ● permissible voltage at input, min. | -30 V |
| ● permissible voltage at input, max. | 30 V |
| Input current | |
| ● for signal "1", typ. | 1.6 mA |
| Input delay (for rated value of input voltage) | |
| for technological functions | |
| — parameterizable | Yes |
| Cable length | |
| ● shielded, max. | 500 m |
| ● unshielded, max. | 150 m |
| Digital outputs | |
| Number of digital outputs | 3 |
| Current-sourcing | Yes |
| Digital outputs, parameterizable | Yes |
| Short-circuit protection | Yes |
| Digital output functions, parameterizable | |
| ● Freely usable digital output | Yes |
| Switching capacity of the outputs | |
| ● with resistive load, max. | 0.5 A |
| Output voltage | |
| ● Type of output voltage | DC |
| Output delay with resistive load | |
| ● "0" to "1", typ. | 20 µs |
| ● "1" to "0", typ. | 30 µs |
| Parallel switching of two outputs | |
| ● for uprating | No |
| Switching frequency | |
| ● with resistive load, max. | 500 Hz |
| Total current of the outputs | |
| ● Current per channel, max. | |
Slicni proizvodi:
Siemens F-TM StepDrive ST; 6BK1136-6SB00-0BU0
SIMATIC F-TM StepDrive ST, drive controller for stepper motors in the safety extra low voltage range, 24 to 48 V DC power supply of the drive, output current 5 A,
-
(Trenutno nema na stanju)
Cena na upit
Siemens F-TM ServoDrive HF; 6BK1136-6AB00-0CU0
SIMATIC F-TM ServoDrive HF, drive controller for servo and stepper motors in safety low-voltage area, 24 to 48 V DC power supply of the drive, rated current 5A,
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP, TM PTO 2x24V; 6ES7138-6EB00-0BA0
SIMATIC ET 200SP, TM PTO 2x24 V, interface module for stepper drives, 2 channels pulse train output, PTO: 24 V, 2 DI, 1 DQ 24 V DC per channel, suitable for BU type
-
(Trenutno nema na stanju)
Cena na upit
Siemens SIMATIC ET 200SP TM ECC 2xPWM ST; 6FE1242-6TM10-0BB1
SIMATIC ET 200SP TM ECC 2xPWM ST Chargecontroller f. conductive charging of electric vehicles according IEC61851 mode 3 for 2 Charging points -30°C...60°C
-
(Trenutno nema na stanju)
Cena na upit
Siemens SIMATIC ET 200SP TM ECC PL ST; 6FE1242-6TM20-0BB1
SIMATIC ET 200SP TM ECC PL ST Chargecontroller for conductiv Charging of electric vehicles according DIN SPEC 70121 Charging Mode 4 TEMP:-30°C...60°C 1x
-
(Trenutno nema na stanju)
Cena na upit
Siemens F-TM ServoDrive ST; 6BK1136-6AB00-0BU0
SIMATIC F-TM ServoDrive ST, drive controller for servo drives in the safety extra low voltage range, 24 to 48 V DC power supply of the drive, output current 5 A,
-
(Trenutno nema na stanju)
Cena na upit