Siemens PotDis-BU type P1,light-colored, PU 1; 6ES7193-6UP00-0DP1
SIMATIC ET 200SP, Potential distributor module, PotDis-BaseUnit PotDis-BU Typ P1, light-colored, 17 x P1-potential, 1 x P2-potential, Push-In terminals. P1-, P2-...
Cena na upit
| SIMATIC ET 200SP, Potential distributor module, PotDis-BaseUnit PotDis-BU Typ P1, light-colored, 17 x P1-potential, 1 x P2-potential, Push-In terminals. P1-, P2- and AUX-rail diconnected from left BU, Packaging Unit: 1 Piece, WxH: 15mm x 117mm |
| General information | |
| Product type designation | PotDis BU type P1, light version, PU 1 |
| HW functional status | FS10 and higher |
| Color code for module-specific color identification plate | CC62 |
| Supply voltage | |
| Rated value (DC) | |
| ● For P1 and P2 bus | 48 V; max. |
| ● for process terminals | 48 V; max. |
| external protection for power supply lines | Yes; 10 A miniature circuit breaker with type B or C tripping characteristic for the respective rated supply voltage |
| Current carrying capacity | |
| For P1 and P2 bus, max. | 10 A |
| For process terminals, max. | 10 A |
| Hardware configuration | |
| Formation of potential groups | |
| ● New potential group | Yes |
| ● Potential group continued from the left | No |
| Slots | |
| ● Number of slots | 1 |
| Potential separation | |
| between backplane bus and supply voltage | Yes |
| Isolation | |
| Isolation tested with | 3 250 V DC |
| Ambient conditions | |
| Ambient temperature during operation | |
| ● horizontal installation, min. | -30 °C |
| ● horizontal installation, max. | 60 °C |
| ● vertical installation, min. | -30 °C |
| ● vertical installation, max. | 50 °C |
| Altitude during operation relating to sea level | |
| ● Installation altitude above sea level, max. | 5 000 m; Restrictions for installation altitudes > 2 000 m, see manual |
| Accessories | |
| Color coding labels | |
| ● for process terminals | CC62 |
| connection method / header | |
| Terminals | |
| ● Terminal type | Push-in terminal |
| ● Conductor cross-section, min. | 0.14 mm² |
| ● Conductor cross-section, max. | 2.5 mm² |
| ● Number of terminals with connection to P1 and P2 bus | 17 terminals to P1, 1 terminal to P2 |
| Dimensions | |
| Width | 15 mm |
| Height | 117 mm |
| Depth | 35 mm |
| Weights | |
| Weight, approx. | 40 g |
| last modified: | 12/19/2020 |
Slicni proizvodi:
Siemens ET 200SP, BU F-DI -forwarding; 3RK1908-0AP00-0JP0
Base unit (BU30-MS9) with F-DI forwarding For ET 200SP motor starter Without infeed
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP, BU F-DI -infeed; 3RK1908-0AP00-0KP0
Base unit (BU30-MS10) With F-DI infeed For ET 200SP motor starter Without infeed Incl. infeed bus cover
-
(Trenutno nema na stanju)
Cena na upit
Siemens BaseUnit Type A1, BU15-P16+A0+2B/T; 6ES7193-6BP00-0BA1
SIMATIC ET 200SP, BaseUnit BU15-P16+A0+2B/T, BU type A1, Push-in terminals, without AUX terminals, bridged to the left, WxH: 15x 117 mm, with temperature acquis
-
(Trenutno nema na stanju)
Cena na upit
Siemens BaseUnit Type A1, BU15-P16+A0+12B/T; 6ES7193-6BP40-0BA1
SIMATIC ET 200SP, BaseUnit BU15-P16+A0+12B/T, BU type A1, Push-in terminals, with 2x 5 add-on terminals, bridged to the left, WxH: 15 mm x 141 mm, with temperature
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP, BU F-DI-forwarding infeed 500V; 3RK1908-0AP00-0HP0
Base unit (BU30-MS8) with F-DI forwarding For ET 200SP motor starter With infeed 500 V Incl. infeed bus cover
-
(Trenutno nema na stanju)
Cena na upit
Siemens BaseUnit Type A1, BU15-P16+A0+2D/T; 6ES7193-6BP00-0DA1
SIMATIC ET 200SP, BaseUnit BU15-P16+A0+2D/T, BU type A1, Push-in terminals, without AUX terminals, New load group, WxH: 15x 117 mm, with temperature acquisition
-
(Trenutno nema na stanju)
4.114,78