Siemens SIMATIC ET 200SP TM ECC 2xPWM ST; 6FE1242-6TM10-0BB1
SIMATIC ET 200SP TM ECC 2xPWM ST Chargecontroller f. conductive charging of electric vehicles according IEC61851 mode 3 for 2 Charging points -30°C...60°C...
Cena na upit
SIMATIC ET 200SP TM ECC 2xPWM ST Chargecontroller f. conductive charging of electric vehicles according IEC61851 mode 3 for 2 Charging points -30°C...60°C 2x Control Pilot 2x Plug Present 2x DQ switch contact for contactor; 2x DI read contact for contactor or connector locking; 2x ACT for connector locking suitable for BU Typ BU20-P12+A0+4B and BU20-P12+A4+0B |
General information | |
Product type designation | ECC 2x PWM ST |
HW functional status | 1 |
Firmware version | V1.04 |
● FW update possible | Yes |
Product description | Technology modules for the conductive AC charging of electric vehicles according to IEC 61851 |
usable BaseUnits | BU type B0, B1 |
Number of channels | 2; Acc. to IEC 61851-1 Mode 3 and/or SAE J1772 |
Product function | |
● I&M data | Yes; I&M0 to I&M3 |
● Isochronous mode | No |
Engineering with | |
● STEP 7 TIA Portal configurable/integrated from version | V14 SP1 |
Installation type/mounting | |
Mounting type | standard rail |
Mounting position | Horizontal |
Supply voltage | |
Type of supply voltage | DC |
Rated value (DC) | 24 V |
permissible range, lower limit (DC) | 19.2 V |
permissible range, upper limit (DC) | 28.8 V |
Reverse polarity protection | Yes; against destruction |
Load voltage L+ | |
● Rated value (DC) | 24 V |
Input current | |
Current consumption, typ. | 40 mA |
Current consumption, max. | 90 mA |
Digital inputs | |
Number of digital inputs | 2; 1 per channel |
Digital inputs, parameterizable | Yes; 12 V / 24 V |
Digital input functions, parameterizable | |
● Freely usable digital input | No; Readback contact contactor / connector lock |
Input voltage | |
● Type of input voltage | DC |
● for signal "0" | <0.2 V (nom) |
● for signal "1" | >0.6 V (nom) |
● permissible voltage at input, min. | 0 V |
● permissible voltage at input, max. | 30 V |
Cable length | |
● unshielded, max. | 30 m |
Digital outputs | |
Type of digital output | Transistor |
Number of digital outputs | 2; 1 per channel |
short-circuit proof | Yes |
Short-circuit protection | Yes; electronic/thermal |
Digital output functions, parameterizable | |
● PWM output | Yes; According to IEC 61851 |
— Number, max. | 2; 1 per channel |
— Cycle duration, parameterizable | No; 1 kHz |
● Connection of a DC motor | Yes; ACT p/n connector locking |
Switching capacity of the outputs | |
● with resistive load, max. | 1.3 A |
Output voltage | |
● Type of output voltage | DC |
● Rated value (DC) | 24 V |
Cable length | |
● unshielded, max. | 30 m; when using a PROFIBUS line |
Analog outputs | |
Number of analog outputs | 2; Control pilot acc. to IEC 61851-1 and/or SAE J1772 |
Connection of a DC motor | Yes; Motor for connector lock |
Protocols | |
Bus communication | Yes |
Vehicle communication according to IEC 61851 | Yes; MODE 3 |
Interrupts/diagnostics/status information | |
Alarms | |
● Diagnostic alarm | Yes |
Diagnoses | |
● Monitoring the supply voltage | No |
● Short-circuit | Yes |
Diagnostics indication LED | |
● ERROR LED | Yes; red LED |
● Monitoring of the supply voltage (PWR-LED) | Yes; green PWR LED |
● Channel status display | Yes; green LED |
● for module diagnostics | Yes; green/red DIAG LED |
Slicni proizvodi:
Siemens F-TM StepDrive ST; 6BK1136-6SB00-0BU0
SIMATIC F-TM StepDrive ST, drive controller for stepper motors in the safety extra low voltage range, 24 to 48 V DC power supply of the drive, output current 5 A,
-
(Trenutno nema na stanju)
Cena na upit
Siemens F-TM ServoDrive HF; 6BK1136-6AB00-0CU0
SIMATIC F-TM ServoDrive HF, drive controller for servo and stepper motors in safety low-voltage area, 24 to 48 V DC power supply of the drive, rated current 5A,
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP TM SIWAREX WP351 HF; 7MH4138-6BA00-0CU0
SIMATIC ET 200SP, TM SIWAREX WP351 HF, verifiable weighing module for automatic dosing-, filling-, checking- and totalizing scales, 3xDI, 3xDQ, 1xCI,1xRS485, 1xEthernet,
-
(Trenutno nema na stanju)
Cena na upit
Siemens ET 200SP, TM PTO 2x24V; 6ES7138-6EB00-0BA0
SIMATIC ET 200SP, TM PTO 2x24 V, interface module for stepper drives, 2 channels pulse train output, PTO: 24 V, 2 DI, 1 DQ 24 V DC per channel, suitable for BU type
-
(Trenutno nema na stanju)
Cena na upit
Siemens SIMATIC ET 200SP TM ECC PL ST; 6FE1242-6TM20-0BB1
SIMATIC ET 200SP TM ECC PL ST Chargecontroller for conductiv Charging of electric vehicles according DIN SPEC 70121 Charging Mode 4 TEMP:-30°C...60°C 1x
-
(Trenutno nema na stanju)
Cena na upit
Siemens F-TM ServoDrive ST; 6BK1136-6AB00-0BU0
SIMATIC F-TM ServoDrive ST, drive controller for servo drives in the safety extra low voltage range, 24 to 48 V DC power supply of the drive, output current 5 A,
-
(Trenutno nema na stanju)
Cena na upit