WALTHER-WERKE WALLBOX EVOLUTION 350 KEY WITH FIXED CHARGING CABLE AND VEHICLE CONNECTOR TYPE 1 16A/3,7KW AND BASIS MONITORING;98701012
WALTHER Wallbox EVOLUTION 350 for charging of electric vehicles according to IEC 61851, wired ready for connection, with the following main features and functions:...
Trenutno nema na stanju
WALTHER Wallbox EVOLUTION 350
for charging of electric vehicles according to IEC 61851, wired ready for connection, with the following main features and functions: Charging point 1 Fixed charging cable with vehicle connector type 1 - 16A / 3,7kW, for charging according to mode 3, straight cable, cable length 5m, Residual current device (FI/RCD) type A, 2-pole 25/0,03A, with accessory device for detecting and shut down by DC fault-current greater than 6 mA, Miniature circuit breaker (LS/MCB) 1-pole 16A C Systems integration KEY in the stand-alone operation On-Off switch of the charging point via knob switch Signaling of operating statuses via LED-signal lamp WALTHER basis monitoring via LAN-connection and webbrowser: Displays the status of the charging points Housing made of aluminium, powder-coated corpus pure white (RAL 9010), door, flashback and panel jet black (RAL 9005) Dimensions HxWxD approx. 436 x 330 x 187mm Weight approx. 17kg Degree of protection IP 44 Connecting power max. 3,7kVA Connecting terminal up to 5x10qmm Wall mounting assembly inclusive
for charging of electric vehicles according to IEC 61851, wired ready for connection, with the following main features and functions: Charging point 1 Fixed charging cable with vehicle connector type 1 - 16A / 3,7kW, for charging according to mode 3, straight cable, cable length 5m, Residual current device (FI/RCD) type A, 2-pole 25/0,03A, with accessory device for detecting and shut down by DC fault-current greater than 6 mA, Miniature circuit breaker (LS/MCB) 1-pole 16A C Systems integration KEY in the stand-alone operation On-Off switch of the charging point via knob switch Signaling of operating statuses via LED-signal lamp WALTHER basis monitoring via LAN-connection and webbrowser: Displays the status of the charging points Housing made of aluminium, powder-coated corpus pure white (RAL 9010), door, flashback and panel jet black (RAL 9005) Dimensions HxWxD approx. 436 x 330 x 187mm Weight approx. 17kg Degree of protection IP 44 Connecting power max. 3,7kVA Connecting terminal up to 5x10qmm Wall mounting assembly inclusive
TECHNICAL DATA
Installation side connection model
3-phase
Number of charging units
1
Max. power per charging point
3,7 kW
Nominal connection power
3,7 kW
Width
330 mm
Height
436 mm
Depth
187 mm
Mounting method
Wall mounting
Number of vehicle connectors Type 1
1
Number of earth leakage circuit breakers type A
1
With circuit breaker
✓
With communication interface
✓
Function access control
✓
Material housing
Aluminium
Degree of protection (IP)
IP44
Impact strength
IK07